China Method of test for f GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 5170.17-2005 Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined sequential cold low air pressure And damp heat testing equipments 电工电子产品环境试验设备 基本参数检定方法 低温/低气压/湿热综合顺序试验设备 - 英文版 |
 |
|
|
GB 16155-2005 Test method for heating performance of civil water heating coal stove 民用水暖煤炉热性能试验方法 - 英文版 |
|
|
|
GB/T 8625-2005 Test method of difficult-flammability for building materials 建筑材料难燃性试验方法 - 英文版 |
|
|
|
GB/T 7680-2005 Torque converters-Methods of performance tests 液力变矩器 性能试验方法 - 英文版 |
|
|
|
GB/T 10901-2005 Methods of Performance testing for centrifuge 离心机 性能测试方法 - 英文版 |
|
|
|
GB/T 7998-2005 Test method for intergranular corrosion of aluminium alloy 铝合金晶间腐蚀测定方法 - 英文版 |
|
|
|
GB/T 5270-2005 Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion 金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述 - 英文版 |
|
|
|
GB/T 19816.4-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定 - 英文版 |
|
|
|
GB/T 19816.3-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定 - 英文版 |
|
|
|
GB/T 19816.2-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 - 英文版 |
|
|
|
GB/T 19816.1-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样 - 英文版 |
|
|
|
GB/T 19789-2005 Packaging Material Standard Test Method for Oxygen Gas Permeability Characteristics of Plastic Film and Sheeting Using a Coulometric Sensor 包装材料 塑料薄膜和薄片氧气透过性试验 库仑计检测法 - 英文版 |
|
|
|
GB/T 11081-2005 Standard Test Method for Ultraviolet Adsorption of White Oils 白油紫外吸光度测定法 - 英文版 |
|
|
|
GB/T 8924-2005 Test method for flammability characteristics of fiber reinforced plastics-Oxygen index method 纤维增强塑料燃烧性能试验方法 氧指数法 - 英文版 |
|
|
|
GB/T 7559-2005 Test method for bearing strength by bolted joints of fiber reinforced plastics laminates 纤维增强塑料层合板 螺栓连接挤压强度试验方法 - 英文版 |
|
|
|
GB/T 6058-2005 Test method for preparation and internal pressure testing of filament-wound pressure vessels 纤维缠绕压力容器制备和内压试验方法 - 英文版 |
|
|
|
GB/T 6011-2005 Test method for flammability characteristics of fiber-reinforced plastics-Incandescent rod method 纤维增强塑料燃烧性能试验方法 炽热棒法 - 英文版 |
|
|
|
GB/T 4944-2005 Test method for interlaminar tensile strength of glass fiber reinforced plastic laminates 玻璃纤维增强塑料层合板层间拉伸强度 试验方法 - 英文版 |
|
|
|
GB/T 3857-2005 Test method for chemical resistance of glass fiber reinforced thermosetting plastics 玻璃纤维增强热固性塑料耐化学介质性能试验方法 - 英文版 |
|
|
|
GB/T 3856-2005 Test method for compression properties of unidirectional fiber reinforced plastics 单向纤维增强塑料平板压缩性能试验方法 - 英文版 |
|
|
|
GB/T 3855-2005 Test method for resin content of carbon fiber reinforced plastics 碳纤维增强塑料树脂含量试验方法 - 英文版 |
|
|
|
GB/T 3854-2005 Test method for hardness of reinforced plastics by means of a Barcol impresser 增强塑料巴柯尔硬度试验方法 - 英文版 |
|
|
|
GB/T 3362-2005 Test methods for tensile properties of carbon fiber multifilament 碳纤维复丝拉伸性能试验方法 - 英文版 |
|
|
|
GB/T 2577-2005 Test method for resin content of glass fiber reinforced plastics 玻璃纤维增强塑料树脂含量试验方法 - 英文版 |
|
|
|
GB/T 2576-2005 Test method for insoluble matter content of resin rsed in fiber reinforced plastics 纤维增强塑料树脂不可溶分含量试验方法 - 英文版 |
|
|
|
GB/T 1464-2005 Test method for density of sandwich construction or cores 夹层结构或芯子密度试验方法 - 英文版 |
|
|
|
GB/T 1463-2005 Test methods for density and relative density of fiber reinforced plastics 纤维增强塑料密度和相对密度试验方法 - 英文版 |
|
|
|
GB/T 1462-2005 Test methods for water absorption of fiber reinforced plastics 纤维增强塑料吸水性试验方法 - 英文版 |
|
|
|
GB/T 1457-2005 Test method for climbing drum peel strength of sandwich constructions 夹层结构滚筒剥离强度试验方法 - 英文版 |
|
|
|
GB/T 1456-2005 Test method for flexural properties of sandwich constructions 夹层结构弯曲性能试验方法 - 英文版 |
|
|
|
GB/T 1455-2005 Test method for shear properties of sandwich constructions or cores 夹层结构或芯子剪切性能试验方法 - 英文版 |
|
|
|
GB/T 1454-2005 Test method for edgewise compressive properties of sandwich constructions 夹层结构侧压性能试验方法 - 英文版 |
|
|
|
GB/T 1453-2005 Test method for flatwise compression properties of sandwich constructions or cores 夹层结构或芯子平压性能试验方法 - 英文版 |
|
|
|
GB/T 1452-2005 Test method for flatwise tension strength of sandwich constructions 夹层结构平拉强度试验方法 - 英文版 |
|
|
|
GB/T 19700-2005 Test method of thermal property for marine heat exchanger 船用热交换器热工性能试验方法 - 英文版 |
|
|
|
GB/T 5170.16-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Centrifugal machines for constant acceleration test 电工电子产品环境试验设备 基本参数检定方法 稳态加速度试验用离心机 - 英文版 |
|
|
|
GB/T 5170.15-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products hydraulic vibrating type machines for vibration(sinusoidal)test 电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用液压振动台 - 英文版 |
|
|
|
GB/T 5170.13-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Mechanical vibrating type machines for vibration(sinusoidal)test 电工电子产品环境试验设备 基本参数检定方法 振动(正弦)试验用机械振动台 - 英文版 |
|
|
|
GB/T 2419-2005 Test method for fluidity of cement mortar 水泥胶砂流动度测定方法 - 英文版 |
|
|
|
GB/T 1345-2005 The test sieving method for fineness of cement 水泥细度检验方法 筛析法 - 英文版 |
|
|
|
GB/T 12957-2005 Test method for activity of industrial waste slag used as addition to cement 用于水泥混合材的工业废渣活性试验方法 - 英文版 |
|
|
|
GB/T 2423.53-2005 Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands 电工电子产品环境试验 第2部分:试验方法 试验Xb：由手的磨擦造成标记和印刷文字的磨损 - 英文版 |
|
|
|
GB/T 19603-2004 Test method for drop-proof properties ofdrop-proof plastic films 塑料无滴薄膜无滴性能试验方法 - 英文版 |
|
|
|
GB/T 19599.2-2004 Testing method for fishing nets of synthetic fibre--Size of netting 合成纤维渔网片试验方法 网片尺寸 - 英文版 |
|
|
|
GB/T 19599.1-2004 Testing method for fishing nets of synthetic fibre--Weight of netting 合成纤维渔网片试验方法 网片重量 - 英文版 |
|
|
|
GB/T 5822.2-2004 Test method of petroleum ether insolubles in lubricating oil for railway locomotive diesel engine 铁路内燃机车柴油机油 石油醚不溶物测定方法 - 英文版 |
|
|
|
GB/T 7734-2004 Method for ultrasonic testing of clad steel plates 复合钢板超声波检验方法 - 英文版 |
|
|
|
GB/T 5773-2004 The method of performance test for positive displacement refrigerant compressors 容积式制冷剂压缩机性能试验方法 - 英文版 |
|
|
|
GB/T 19498-2004 The static testing method and accepting technical comdition of the protective structures on agricultural and forestry tractors 农林拖拉机防护装置 静态试验方法和验收技术条件 - 英文版 |
|
|
|
GB 19482-2004 Safety property requirements and test method for fuel tanks of motorcycles and mopeds 摩托车和轻便摩托车燃油箱安全性能要求和试验方法 - 英文版 |
|
| Find out:2524Items | To Page of: First -Previous-Next -Last | [38] [39] [40] [41] [42] [43] [44] |
+86-755-2583-1330
