China Plastics. Determinat GB Standards Search Result |
 |
1. Ready translated GB standards  and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
|
GB/T 22040-2008 Technical requirements and determination of weathering quality for plastics of highway furnatures 公路沿线设施塑料制品耐候性要求及测试方法 - 英文版 |
 |
|
|
GB/T 22047-2008 Plastics - Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved 土壤中塑料材料最终需氧生物分解能力的测定 采用测定密闭呼吸计中需氧量或测定释放的二氧化碳的方法 - 英文版 |
|
|
|
GB/T 9267-2008 Emulsions for coatings and polymer dispersions for coatings and plastics - Determination of white point temperature and minimum film-forming temperature 涂料用乳液和涂料、塑料用聚合物分散体 白点温度和最低成膜温度的测定 - 英文版 |
|
|
|
GB/T 6743-2008 Plastics(polyester resins) and paints and varnishes(binders) - Determination of partial acid value and total acid value 塑料用聚酯树脂、色漆和清漆用漆基 部分酸值和总酸值的测定 - 英文版 |
|
|
|
GB/T 21989-2008 Plastics - Poly(vinyl chloride)pastes - Determination of apparent viscosity using the severs rheometer 塑料 聚氯乙烯糊 用Severs流变仪测定表观黏度 - 英文版 |
|
|
|
GB/T 9348-2008 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles 塑料 聚氯乙烯树脂 杂质与外来粒子数的测定 - 英文版 |
|
|
|
GB/T 2914-2008 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) 塑料 氯乙烯均聚和共聚树脂 挥发物(包括水)的测定 - 英文版 |
|
|
|
GB/T 21843-2008 Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mechanical sieving 塑料 氯乙烯均聚和共聚树脂 用机械筛测定粒径 - 英文版 |
|
|
|
GB/T 18943-2008 Cellular rubbers and plastics - Determination of dynamic cushioning performance 多孔橡胶与塑料 动态缓冲性能测定 - 英文版 |
|
|
|
GB/T 21461.2-2008 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分: 试样制备和性能测定 - 英文版 |
|
|
|
GB/T 21460.2-2008 Plastics - Styrene/acrylonitrile(SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第2部分: 试样制备和性能测定 - 英文版 |
|
|
|
GB/T 8813-2008 Rigid cellular plastics - Determination of compression properties 硬质泡沫塑料压缩性能的测定 - 英文版 |
|
|
|
GB/T 21332-2008 Rigid cellular plastics - Determination of water vapour transmission properties 硬质泡沫塑料 水蒸气透过性能的测定 - 英文版 |
|
|
|
GB/T 10799-2008 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells 硬质泡沫塑料 开孔和闭孔体积百分率的测定 - 英文版 |
|
|
|
GB/T 8812.2-2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity 硬质泡沫塑料 弯曲性能的测定 第2部分: 弯曲强度和表观弯曲弹性模量的测定 - 英文版 |
|
|
|
GB/T 8812.1-2007 Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test 硬质泡沫塑料 弯曲性能的测定 第1部分：基本弯曲试验 - 英文版 |
|
|
|
GB/T 21300-2007 Plastics pipes and fittings - Determination of opacity 塑料管材和管件 不透光性的测定 - 英文版 |
|
|
|
GB/T 1725-2007 Paints,varnishes and plastics - Determination of non-volatile-matter content 色漆、清漆和塑料 不挥发物含量的测定 - 英文版 |
|
|
|
GB/T 21060-2007 Plastics - Determination of pourability 塑料 流动性的测定 - 英文版 |
|
|
|
GB/T 21059-2007 Plastics - polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate 塑料 液态或乳液态或分散体系聚合物/树脂 用旋转黏度计在规定剪切速率下黏度的测定 - 英文版 |
|
|
|
GB/T 20673-2006 Cellular plastics - Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures 硬质泡沫塑料 低于环境温度的线膨胀系数的测定 - 英文版 |
|
|
|
GB/T 20672-2006 Cellular plastics, rigid - Determination of compressive creep under specified load and temperature conditions 硬质泡沫塑料 在规定负荷和温度条件下压缩蠕变的测定 - 英文版 |
|
|
|
GB/T 12812-2006 Rigid cellular plastics - Determination of friability 硬质泡沫塑料 易碎性的测定 - 英文版 |
|
|
|
GB/T 12833-2006 Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength 橡胶和塑料 撕裂强度和粘合强度测定中的多峰曲线分析 - 英文版 |
|
|
|
GB/T 1040.4-2006 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites 塑料 拉伸性能的测定 第4部分：各向同性和正交各向异性纤维增强复合材料的试验条件 - 英文版 |
|
|
|
GB/T 1040.3-2006 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets 塑料 拉伸性能的测定 第3部分：薄膜和薄片的试验条件 - 英文版 |
|
|
|
GB/T 1040.2-2006 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics 塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件 - 英文版 |
|
|
|
GB/T 1040.1-2006 Plastics - Determination of tensile properties - Part 1: General principles 塑料 拉伸性能的测定 第1部分：总则 - 英文版 |
|
|
|
GB/T 20220-2006 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness) 塑料薄膜和薄片 样品平均厚度，卷平均厚度及单位质量面积的测定 称量法（称量厚度） - 英文版 |
|
|
|
GB/T 20417.2-2006 Plastics―Acrylonitrile-butadiene-styrene(ABS)moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 丙烯腈-丁二烯-苯乙烯 (ABS) 模塑和挤出材料 第2部分:试样制备和性能测定 - 英文版 |
|
|
|
GB/T 1845.2-2006 Plastics―Polyethylene(PE) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 聚乙烯 (PE) 模塑和挤出材料 第2部分: 试样制备和性能测定 - 英文版 |
|
|
|
GB/T 8810-2005 Determination of water absorption of rigid cellular plastics 硬质泡沫塑料吸水率的测定 - 英文版 |
|
|
|
GB/T 20026-2005 Rubber and plastics hose -- Determination of abrasion of lining 橡胶和塑料软管 内衬层耐磨性测定 - 英文版 |
|
|
|
GB/T 20022-2005 Plastics -- Homopolymer and Copolymer resins of vinyl chloride Determination of apparent density 塑料 氯乙烯均聚和共聚树脂表观密度的测定 - 英文版 |
|
|
|
GB/T 3140-2005 Fiber-reinforced plastics composites-Determination of mean specific heat capacity 纤维增强塑料平均比热容试验方法 - 英文版 |
|
|
|
GB/T 3139-2005 Fiber-reinforced plastics composites-Determination of thermal conductivity 纤维增强塑料导热系数试验方法 - 英文版 |
|
|
|
GB/T 2572-2005 Fiber-reiforced plastics composites-Determination for mean coefficient of linear expansion 纤维增强塑料平均线膨胀系数试验方法 - 英文版 |
|
|
|
GB/T 1451-2005 Fiber-reinforced plastics composites---Determination of Charpy impact properties 纤维增强塑料简支梁式冲击韧性 试验方法 - 英文版 |
|
|
|
GB/T 1448-2005 Fiber-reinforced plastics composites-Determination of compressive properties 纤维增强塑料压缩性能试验方法 - 英文版 |
|
|
|
GB/T 1447-2005 Fiber-reinforced plastics composites---Determination of tensile properties 纤维增强塑料拉伸性能试验方法 - 英文版 |
|
|
|
GB/T 1446-2005 Fiber-reinforced plastics composites-The generals for determination of properties 纤维增强塑料性能试验方法总则 - 英文版 |
|
|
|
GB/T 19811-2005 Plastics-Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test 在定义堆肥化中试条件下 塑料材料崩解程度的测定 - 英文版 |
|
|
|
GB/T 19687-2005 Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods) 闭孔塑料长期热阻变化的测定 实验室加速测试方法 - 英文版 |
|
|
|
GB/T 19466.3-2004 Plastics--Differential scanning calorimetry(DSC)--Part 3:Determination of temperatureand enthalpy of melting and crystallization 塑料 差示扫描量热法(DSC) 第3部分:熔融和结晶温度及热焓的测定 - 英文版 |
|
|
|
GB/T 19466.2-2004 Plastics--Differential scanning calorimetry(DSC)--Part 2:Determination of glass transition temperature 塑料 差示扫描量热法(DSC) 第2部分:玻璃化转变温度的测定 - 英文版 |
|
|
|
GB/T 1634.3-2004 Plastics--Determination of temperature of deflection under load--Part 3:High-strength thermosetting laminates 塑料 负荷变形温度的测定 第3部分:高强度热固性层压材料 - 英文版 |
|
|
|
GB/T 1634.2-2004 Plastics--Determination of temperature of deflection under load--Part 2:Plastics，ebonite and long-fibre-reinforced composites 塑料 负荷变形温度的测定 第2部分:塑料、硬橡胶和长纤维增强复合材料 - 英文版 |
|
|
|
GB/T 1634.1-2004 Plastics--Determination of temperature of deflection under load--Part 1:General test method 塑料 负荷变形温度的测定 第1部分:通用试验方法 - 英文版 |
|
|
|
GB/T 12027-2004 Plastics--Film and sheeting--Determination of dimensional change on heating 塑料 薄膜和薄片 加热尺寸变化率试验方法 - 英文版 |
|
|
|
GB/T 12000-2003 Determination of the effects of exposure to damp heat，water spray and salt mist for plastics 塑料暴露于湿热、水喷雾和盐雾中影响的测定 - 英文版 |
|
| Find out:332Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 |
+86-755-2583-1330
