China Product Specificatio GB Standards Search Result |
1. Ready translated GB standards and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
GB/T 24635.3-2009 Geometrical Product Specifications (GPS) - Coordinate measuring machines(CMM) - Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards 产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第3部分:应用已校准工件或标准件 - 英文版 |
||
GB/T 24634-2009 Geometrical Product Specifications (GPS) - General concepts and requirements for GPS measuring equipment 产品几何技术规范(GPS) GPS 测量设备通用概念和要求 - 英文版 |
||
GB/T 18777-2009 Geometrical Product Specifications (GPS) - Surface texture - Profile method - Metrological characteristics of phase correct filters 产品几何技术规范(GPS) 表面结构 轮廓法 相位修正滤波器的计量特性 - 英文版 |
||
GB/T 18618-2009 Geometrical Product Specifications (GPS) - Surface texture - Profile method - Motif parameters 产品几何技术规范(GPS) 表面结构 轮廓法 图形参数 - 英文版 |
||
GB/T 24633.2-2009 Geometrical Product Specifications (GPS) - Cylindricity - Part 2: Specification operators 产品几何技术规范(GPS) 圆柱度 第2部分:规范操作集 - 英文版 |
||
GB/T 24633.1-2009 Geometrical Product Specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form 产品几何技术规范(GPS) 圆柱度 第1部分:词汇和参数 - 英文版 |
||
GB/T 24632.2-2009 Geometrical Product Specifications (GPS) - Roundness - Part 2: Specification operators 产品几何技术规范(GPS) 圆度 第2部分:规范操作集 - 英文版 |
||
GB/T 24632.1-2009 Geometrical Product Specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness 产品几何技术规范(GPS) 圆度 第1部分:词汇和参数 - 英文版 |
||
GB/T 24631.2-2009 Geometrical Product Specifications (GPS) - Straightness - Part 2: Specification operators 产品几何技术规范(GPS) 直线度 第2部分:规范操作集 - 英文版 |
||
GB/T 24631.1-2009 Geometrical Product Specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness 产品几何技术规范(GPS) 直线度 第1部分:词汇和参数 - 英文版 |
||
GB/T 24630.2-2009 Geometrical Product Specifications (GPS) - Flatness - Part 2: Specification operators 产品几何技术规范(GPS) 平面度 第2部分:规范操作集 - 英文版 |
||
GB/T 24630.1-2009 Geometrical Product Specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness 产品几何技术规范(GPS) 平面度 第1部分:词汇和参数 - 英文版 |
||
GB/T 16857.3-2009 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第3部分:配置转台的轴线为第四轴的坐标测量机 - 英文版 |
||
GB 16413-2009 Inspecting specification of glass fiber reinforced plastic product safety property for coal mining 煤矿井下用玻璃钢制品安全性能检验规范 - 英文版 |
||
GB/T 13126-2009 General specification for damp heat protective packaging of mechanical and electrical products 机电产品湿热带防护包装通用技术条件 - 英文版 |
||
GB/T 24356-2009 Specifications for quality inspection and acceptance of surveying and mapping products 测绘成果质量检查与验收 - 英文版 |
||
GB/T 6062-2009 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristic of contact(stylus) instruments 产品几何技术规范(GPS) 表面结构 轮廓法 接触(触针)式仪器的标称特性 - 英文版 |
||
GB/T 4249-2009 Geometrical Product Specifications(GPS) - Tolerancing principle 产品几何技术规范(GPS) 公差原则 - 英文版 |
||
GB/T 3505-2009 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters 产品几何技术规范(GPS) 表面结构 轮廓法 术语、定义及表面结构参数 - 英文版 |
||
GB/T 3177-2009 Geometrical Product Specifications (GPS) - Inspection of plain workpiece sizes 产品几何技术规范(GPS) 光滑工件尺寸的检验 - 英文版 |
||
GB/T 18779.3-2009 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements 产品几何技术规范(GPS) 工件与测量设备的测量检验 第3部分:关于对测量不确定度的表述达成共识的指南 - 英文版 |
||
GB/T 1801-2009 Geometrical Product Specifications (GPS) - Limits and fits - Selection of tolerance zones and fits 产品几何技术规范(GPS) 极限与配合 公差带和配合的选择 - 英文版 |
||
GB/T 1800.2-2009 Geometrical Product Specifications (GPS) - Limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts 产品几何技术规范(GPS) 极限与配合 第2部分:标准公差等级和孔、轴极限偏差表 - 英文版 |
||
GB/T 1800.1-2009 Geometrical Product Specifications (GPS) - Limits and fits - Part 1: Bases of tolerances, deviations and fits 产品几何技术规范(GPS) 极限与配合 第1部分:公差、偏差和配合的基础 - 英文版 |
||
GB/T 16747-2009 Geometrical Product Specification (GPS) - Surface texture:Profile method - Surface waviness terms 产品几何技术规范(GPS) 表面结构 轮廓法 表面波纹度词汇 - 英文版 |
||
GB/T 16671-2009 Geometrical Product Specifications(GPS) - Geometrical tolerancing - Maximum material requirement(MMR),least material requirement(LMR) and reciprocity requirement(RPR) 产品几何技术规范(GPS) 几何公差 最大实体要求、最小实体要求和可逆要求 - 英文版 |
||
GB/T 14495-2009 Geometrical Product Specifications(GPS) - Surface texture: Profile method - Roughness comparison specimens for wooden pieces 产品几何技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度比较样块 - 英文版 |
||
GB/T 12471-2009 Geometrical Product Specifications(GPS) - Wooden part - Limit and fit 产品几何技术规范(GPS) 木制件 极限与配合 - 英文版 |
||
GB/T 10610-2009 Geometrical Product Specifications(GPS) - Surface texture:Profile method - Rules and procedures for the assessment of surface texture 产品几何技术规范(GPS) 表面结构 轮廓法 评定表面结构的规则和方法 - 英文版 |
||
GB/T 1031-2009 Geometrical Product Specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values 产品几何技术规范(GPS) 表面结构 轮廓法 表面粗糙度参数及其数值 - 英文版 |
||
GB 22280-2008 Specification for production of preservative-treated wood 防腐木材生产规范 - 英文版 |
||
GB/T 13384-2008 General specifications for packing of mechanical and electrical product 机电产品包装通用技术条件 - 英文版 |
||
GB/T 2485-2008 Bonded abrasive products - Technical specifications 固结磨具 技术条件 - 英文版 |
||
GB/T 18838.4-2008 Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 4:Low-carbon cast-steel shot 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第4部分: 低碳铸钢丸 - 英文版 |
||
GB/T 18838.3-2008 Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第3部分: 高碳铸钢丸和砂 - 英文版 |
||
GB/T 13288.1-2008 Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义 - 英文版 |
||
GB/T 1182-2008 Geometrical Product Specifications(GPS) - Geometrical tolerancing - Tolerances of form,orientation,location and run-out 产品几何技术规范(GPS)几何公差 形状、方向、位置和跳动公差标注 - 英文版 |
||
GB/T 7403.2-2008 Lead-acid traction batteries - Part 2: Product types and specifications 牵引用铅酸蓄电池 第2部分: 产品品种和规格 - 英文版 |
||
GB/T 20809-2006 The evaluating specification on the HACCP certification of the meat products 肉制品生产 HACCP 应用规范 - 英文版 |
||
GB/T 20626.2-2006 Specific environmental condition - Electrical and electronic products for plateau - Part 2: Selective types and testing specification 特殊环境条件 高原电工电子产品 第2部分:选型和检验规范 - 英文版 |
||
GB 20424-2006 The specification for limit on harmful element content of the heavy metal concentrates products 重金属精矿产品中有害元素的限量规范 - 英文版 |
||
GB/Z 20308-2006 Geometrical Product Specifications(GPS) - Masterplan 产品几何技术规范(GPS) 总体规划 - 英文版 |
||
GB/T 18778.3-2006 Geometrical Product Specifications(GPS) - Surface texture: Profile method - Surface having stratified functional properties - Part 3: Height characterization using the material probability curve 产品几何技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第3部分: 用概率支承率曲线表征高度特性 - 英文版 |
||
GB/T 16857.6-2006 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第6部分:计算高斯拟合要素的误差的评定 - 英文版 |
||
GB/T 16857.2-2006 Geometrical Product Specifications(GPS) - Acceptance and reverification tests for coordinate measuring machines(CMM) - Part 2: CMMs used for measuring size 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第2部分: 用于测量尺寸的坐标测量机 - 英文版 |
||
GB/T 131-2006 Geometrical Product Specifications (GPS) - Indication of surface texture in technical Product documentation 产品几何技术规范(GPS) 技术产品文件中表面结构的表示法 - 英文版 |
||
GB/T 20420-2006 Lubricants, industrial oils and related products (class L)-Family E (internal combustion engine oils)-Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD) 润滑剂、工业用油和相关产品(L类)-E组(内燃机油)-二冲程汽油发动机油(EGB、EGC和EGD) - 英文版 |
||
GB/T 514-2005 Specification for liquid-in-glass thermometers for testing of petroleum products 石油产品试验用玻璃液体温度计技术条件 - 英文版 |
||
GB/T 19765-2005 Geometrical Product Specifications(GPS)-Standard reference temperature for geometrical product specification and verification 产品几何量技术规范(GPS)--产品几何量技术规范和检验的标准参考温度 - 英文版 |
||
GB/T 12360-2005 Geometrical Product Specifications(GPS) Cone fit 产品几何量技术规范(GPS) 圆锥配合 - 英文版 |
Find out:382Items | To Page of: First -Previous-Next -Last | [1] [2] [3] [4] [5] [6] [7] |