China Test method of tin p GB Standards Search Result |
1. Ready translated GB standards and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
GB/T 12967.1-2008 Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 1:Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test Apparatus 铝及铝合金阳极氧化膜检测方法 第1部分:用喷磨试验仪测定阳极氧化膜的平均耐磨性 - 英文版 |
||
GB/T 7121.1-2008 The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分:后置式静态试验方法 - 英文版 |
||
GB/T 21960-2008 The testing method and accepting condition of the driver’s seat on agricultural and forestry tractors 农林拖拉机驾驶座试验方法和验收条件 - 英文版 |
||
GB/T 21956.3-2008 The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3:Static testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分:后置式静态试验方法 - 英文版 |
||
GB/T 21956.2-2008 The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2:Dynamic testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分:前置式动态试验方法 - 英文版 |
||
GB/T 21956.1-2008 The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1:Static testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分:前置式静态试验方法 - 英文版 |
||
GB/T 14321-2008 Testing method for quantities of α-Al2O3 phase in alumina with an X-ray diffractometer 刚玉磨料中α-Al2O3相X射线定量测定方法 - 英文版 |
||
GB/T 1839-2008 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products 钢产品镀锌层质量试验方法 - 英文版 |
||
GB/T 13813-2008 Testing method and judging rule of safety to friction spark of metallic material for coal mine 煤矿用金属材料摩擦火花安全性试验方法和判定规则 - 英文版 |
||
GB/T 2423.43-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests 电工电子产品环境试验 第2部分:试验方法 振动、冲击和类似动力学试验样品的安装 - 英文版 |
||
GB/T 9291-2008 Surface active agents - Method of testing of the restraining effect of levelling agents for disperse dyes on dyeing polyester textile under high temperature conditions 表面活性剂 高温条件下分散染料染聚酯织物时匀染剂的抑染作用测试法 - 英文版 |
||
GB/T 12605-2008 Non-destructive testing - Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes 无损检测 金属管道熔化焊环向对接接头射线照相检测方法 - 英文版 |
||
GB/T 21853-2008 Testing of chemicals - Partition coefficient(n-octanol/water)- Shake flask method 化学品 分配系数(正辛醇-水) 摇瓶法试验 - 英文版 |
||
GB/T 21852-2008 Testing of chemicals - Partition coefficient(n-octanol/water)- High performance liquid chromatography(HPLC)method 化学品 分配系数(正辛醇-水) 高效液相色谱法试验 - 英文版 |
||
GB/T 21781-2008 Test methods for melting point and melting range of chemical products - Capillary tube method 化学品的熔点及熔融范围试验方法 毛细管法 - 英文版 |
||
GB/T 16267-2008 Test method of packaging materials - Vapors corrosion inhibiting ability 包装材料试验方法 气相缓蚀能力 - 英文版 |
||
GB/T 21625-2008 Dangerous goods - Bullet impact test method of extremely insensitive detonating substance 危险品 极不敏感引爆物质的子弹撞击试验方法 - 英文版 |
||
GB/T 21613-2008 Dangerous goods - Test method for determination of the accelerating decomposition temperature 危险品 自加速分解温度试验方法 - 英文版 |
||
GB/T 19198-2008 Testing method for thermo-electromotive force of precious metals and their alloys pair up with platinum or copper 贵金属及其合金对铂、对铜热电动势的测量方法 - 英文版 |
||
GB/T 18036-2008 The test method of thermo-emf for platinum 铂铑热电偶细丝的热电动势测量方法 - 英文版 |
||
GB/T 15078-2008 Testing method for contact resistance of precious metals electrical contact materials 贵金属电触点材料接触电阻的测量方法 - 英文版 |
||
GB/T 15072.6-2008 Test method of precious metal alloys - Determination of iridium contents for platinum, palladium alloys - Electricity titration with ferrous sulfate 贵金属合金化学分析方法 铂、钯合金中铱量的测定 硫酸亚铁电流滴定法 - 英文版 |
||
GB/T 15072.3-2008 Test method of precious metal alloys - Determination of platinum content for gold, platinum and palladium alloys - Electricity titration using potassium permanganate 贵金属合金化学分析方法 金、铂、钯合金中铂量的测定 高锰酸钾电流滴定法 - 英文版 |
||
GB/T 15072.17-2008 Test method of precious metal alloys - Determination of tungsten contents for platinum alloys - Tungstic acid gravimetry 贵金属合金化学分析方法 铂合金中钨量的测定 三氧化钨重量法 - 英文版 |
||
GB/T 15072.13-2008 Test method of precious metal alloys - Determination of tin , cerium and lanthanium contents for silver alloys - Inductively coupled clasma atomic emission spectrometry 贵金属合金化学分析方法 银合金中锡、铈和镧量的测定 电感耦合等离子体原子发射光谱法 - 英文版 |
||
GB/T 15072.1-2008 Test method of precious alloys - Determination of gold content for gold, platinum and palladium alloys - Potentiometric titration using ferrous sulfate 贵金属合金化学分析方法 金、铂、钯合金中金量的测定 硫酸亚铁电位滴定法 - 英文版 |
||
GB/T 5018-2008 Standard test method for determining corrosion preventive properties of lubricating greases 润滑脂防腐蚀性试验法 - 英文版 |
||
GB/T 11964-2008 Test method for loss on heating of asphalt 石油沥青蒸发损失测定法 - 英文版 |
||
GB/T 11143-2008 Standard test method for rust-preventing characteristics of inhibited mineral oil in the presence of water 加抑制剂矿物油在水存在下防锈性能试验法 - 英文版 |
||
GB/T 6072.1-2008 Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use 往复式内燃机 性能 第1部分:功率、燃料消耗和机油消耗的标定及试验方法 通用发动机的附加要求 - 英文版 |
||
GB/T 21405-2008 Reciprocating intenal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178 往复式内燃机 发动机功率的确定和测量方法 排气污染物排放试验的附加要求 - 英文版 |
||
GB/T 8074-2008 Testing method for specific surface of cement - Blaine method 水泥比表面积测定方法 勃氏法 - 英文版 |
||
GB/T 10339-2007 Testing method of light scattering and absorption coefficient for paper,board and pulps 纸、纸板和纸浆的光散射和光吸收系数的测定 - 英文版 |
||
GB/T 21216-2007 insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method 绝缘液体 测量电导和电容确定介质损耗因数的试验方法 - 英文版 |
||
GB/T 1408.3-2007 Electric strength of insulating materials test methods - Part 3: Additional requirements for 1,2/50μs impulse tests 绝缘材料电气强度试验方法 第3部分:1.2/50μs脉冲试验补充要求 - 英文版 |
||
GB/T 10066.31-2007 Test methods for electroheat installtions - Part 31: High-frequency induction heating installation- Test methods for the determination of power output of the generator 电热装置的试验方法 第31部分:高频感应加热装置发生器输出功率的测定 - 英文版 |
||
GB/T 3048.3-2007 Test methods for electrical properties of electric cables and wires - Part 3:Test of volume resistivity of semi-conducting rubbers and plastics 电线电缆电性能试验方法 第3部分:半导电橡塑材料体积电阻率试验 - 英文版 |
||
GB/T 3137-2007 Testing method for electrical properties of tantalum powder 钽粉电性能试验方法 - 英文版 |
||
GB/T 21196.1-2007 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus 纺织品 马丁代尔法织物耐磨性的测定 第1部分:马丁代尔耐磨试验仪 - 英文版 |
||
GB/T 21089.1-2007 Testing method of application performance of waterborne additives for architectural coatings - part 1: Dispersing agent,Defoaming agent, Thickening agent 建筑涂料水性助剂应用性能试验方法 第1部分:分散剂、消泡剂和增稠剂 - 英文版 |
||
GB/T 6167-2007 Methods for testing the performance of airborne particle counter 尘埃粒子计数器性能试验方法 - 英文版 |
||
GB/T 14985-2007 General rules of dimensions, shape, surface, quality, testing method and inspection for expansion alloys 膨胀合金尺寸、外形、表面质量、试验方法和检验规则的一般规定 - 英文版 |
||
GB/T 11144-2007 Standard test method for measurement of extreme-perssure prosperties of lubricating fluids - Timken method 润滑液极压性能测定法 梯姆肯法 - 英文版 |
||
GB/T 8243.12-2007 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分:采用颗粒计数法测定滤清效率和容灰量 - 英文版 |
||
GB/T 8243.11-2007 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 11: Self-cleaning filters 内燃机全流式机油滤清器试验方法 第11部分:自净式滤清器 - 英文版 |
||
GB/T 20875.1-2007 Method of test the hydrolytic stability of electrical insulating materials - Part 1: Plastic films 电气绝缘材料水解稳定性的试验方法 第1部分:塑料薄膜 - 英文版 |
||
GB/T 20829-2007 Performance requirements and test method of fixed aerosol fire extinguishing systems for ships 船舶固定式气溶胶灭火系统 性能要求和试验方法 - 英文版 |
||
GB/T 8243.7-2006 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 7: Vibration fatigue test 内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验 - 英文版 |
||
GB/T 20702-2006 Test method for extinguishing property of gaseous extinguishing agent 气体灭火剂灭火性能测试方法 - 英文版 |
||
GB/T 20671.7-2006 Classification system and test methods for nonmetallic gasket materials - Part 7: Standard test methods for tension testing of nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第7部分: 非金属垫片材料拉伸强度试验方法 - 英文版 |
Find out:640Items | To Page of: First -Previous-Next -Last | [4] [5] [6] [7] [8] [9] [10] |