China Determination of low GB Standards Search Result |
![]() |
1. Ready translated GB standards ![]() 2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
![]() |
GB/T 6150.3-2023 Methods for chemical analysis of tungsten concentrates Part 3: Determination of phosphorus content Phosphomolybdenum yellow spectrophotometry and inductively coupled plasma atomic emission spectrometry - 英文版 |
![]() |
|
![]() |
GB/T 43316.6-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 6: Slow strain rate method - 英文版 |
![]() |
|
![]() |
GB/T 43096-2023 Metal powders. Determination of external specific surface area by powder layer permeability test under steady flow conditions. - 英文版 |
![]() |
|
![]() |
GB/T 23961-2023 Determination of low-carbon fatty amine content by gas chromatography - 英文版 |
![]() |
|
![]() |
GB/T 35306-2023 Determination of carbon and oxygen content in silicon single crystal Low-temperature Fourier transform infrared spectroscopy - 英文版 |
![]() |
|
![]() |
GB/T 42483-2023 Determination of thermal conductivity of wood - heat flow method - 英文版 |
![]() |
|
![]() |
GB/T 42487-2023 Soil quality - Determination of soil nitrate nitrogen, nitrite nitrogen and ammonium nitrogen - potassium chloride solution leaching flow analysis method - 英文版 |
![]() |
|
![]() |
GB/T 41382-2022 Fire test open calorimeter method determination of heat release rate and combustion products in fire below 40mW - 英文版 |
![]() |
|
![]() |
GB/T 22459.2-2022 Refractory mortars—Part 2:Determination of consistency using the reciprocating flow table method - 英文版 |
![]() |
|
![]() |
GB/T 41329-2022 Determination of the flowability of metal powders Standard funnel method (Gustafsson flowmeter) - 英文版 |
![]() |
|
![]() |
GB/T 1482-2022 Metal powders - Determination of fluidity - Standard funnel method (Hall flow meter) - 英文版 |
![]() |
|
![]() |
GB/T 11603-2022 Method for determination of average wool fiber diameter - airflow method - 英文版 |
![]() |
|
![]() |
GB/T 42162-2022 Raw rubber - Determination of residual monomers and other volatile low molecular weight compounds by capillary gas chromatography - Thermal desorption (dynamic headspace) method - 英文版 |
![]() |
|
![]() |
GB/T 37211.3-2022 Methods for chemical analysis of germanium metal - Part 3: Determination of trace impurity elements - Glow discharge mass spectrometry - 英文版 |
![]() |
|
![]() |
GB/T 41793-2022 Test method for artificial leather and synthetic leather - Determination of potential phenolic yellowing - 英文版 |
![]() |
|
![]() |
GB/T 40380.2-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures - 英文版 |
![]() |
|
![]() |
GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures - 英文版 |
![]() |
|
![]() |
GB/T 39748.8-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate - 英文版 |
![]() |
|
![]() |
GB/T 39822-2021 Plastics—Determination of yellowness index and change in yellowness index - 英文版 |
![]() |
|
![]() |
GB/T 39693.3-2021 Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale - 英文版 |
![]() |
|
![]() |
GB/T 40919-2021 Polyethylene materials for piping systems—Determination of Strain Hardening Modulus in relation to slow crack growth - 英文版 |
![]() |
|
![]() |
GB/T 38902-2020 Determination of hollow fiber membrane cross-section dimensions—Image analysis method - 英文版 |
![]() |
|
![]() |
GB/T 17360-2020 Microbeam analysis—Method of quantitative determination for low contents of silicon and manganese in steels using electron probe microanalyzer - 英文版 |
![]() |
|
![]() |
GB/T 24522-2020 Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint - 英文版 |
![]() |
|
![]() |
GB/T 14513.3-2020 Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 3:Method for calculating steady-state flow-rate characteristics of systems - 英文版 |
![]() |
|
![]() |
GB/T 38516-2020 Permeable sintered metal materials—Determination of average pore size of medium flow - 英文版 |
![]() |
|
![]() |
GB/T 7758-2020 Rubber, vulcanized—Determination of low-temperature characteristics—Temperature-retraction procedure (TR test) - 英文版 |
![]() |
|
![]() |
GB/T 6036-2020 Rubber,vulcanized or thermoplastic—Determination of low-temperature stiffening(Gehman test) - 英文版 |
![]() |
|
![]() |
GB/T 39696-2020 Determination of flowability of fine ceramic powders—Calibrated funnel - 英文版 |
![]() |
|
![]() |
GB/T 24981.2-2020 Test methods of rare earth long afterglow phosphors—Part 2: Determination of afterglow brightness - 英文版 |
![]() |
Find out:137Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 |