China Test methods of cont GB Standards Search Result |
1. Ready translated GB standards and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within
1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days . |
GB/T 43657.3-2024 Energy efficiency of industrial vehicles - Test methods - Part 3: Container handlers 工业车辆能效-试验方法-第3部分:集装箱搬运车 - 英文版 |
||
GB/T 43657.2-2024 Energy efficiency of industrial vehicles - Test methods - Part 2: Self-propelled vehicles, tractors and carriers controlled by operators 工业车辆能效-试验方法-第2部分:操作者控制的自行式车辆、牵引车和载运车 - 英文版 |
||
GB/T 43811-2024 Test methods for short fiber content of fiber products for wadding 絮用纤维制品短纤维含量测试方法 - 英文版 |
||
GB/T 14571.3-2022 Test methods for ethylene glycol for industrial use - Part 3: Determination of aldehyde content 工业用乙二醇试验方法 第3部分:醛含量的测定 - 英文版 |
||
GB/T 38265.9-2022 Test methods for soldering fluxes - Part 9: Determination of ammonia content 软钎剂试验方法 第9部分:氨含量的测定 - 英文版 |
||
GB/T 38265.8-2022 Test methods for soldering fluxes - Part 8: Determination of zinc content 软钎剂试验方法 第8部分:锌含量的测定 - 英文版 |
||
GB/T 38265.6-2022 Test methods for soldering fluxes - Part 6: Determination of halide (excluding fluoride) content 软钎剂试验方法 第6部分:卤化物(不包括氟化物)含量的测定 - 英文版 |
||
GB/T 40535.1-2021 Test methods of continuous nitride ceramic fibers—Part 1:Nitrogen content 连续氮化物陶瓷纤维测试方法 第1部分:氮含量 - 英文版 |
||
GB/T 34520.8-2021 Test methods of continuous silicon carbide fibers—Part 8:Oxygen content 连续碳化硅纤维测试方法 第8部分:氧含量 - 英文版 |
||
GB/T 34520.9-2021 Test methods of continuous silicon carbide fibers - Part 9: Carbon content 连续碳化硅纤维测试方法 第9部分:碳含量 - 英文版 |
||
GB/T 8243.12-2021 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分:颗粒计数法滤清效率和容灰量 - 英文版 |
||
GB/T 39748.9-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 9:Gravimetric determination of density 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第9部分:称重法测定密度 - 英文版 |
||
GB/T 39748.8-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分:称重法测定流量 - 英文版 |
||
GB/T 39748.7-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分:称重法测定压力作用下的吸液量 - 英文版 |
||
GB/T 39748.6-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 6:Gravimetric determination of fluid retention capacity in saline solution after centrifugation 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第 6 部分: 称重法测定离心后的生理盐水保液率 - 英文版 |
||
GB/T 39748.11-2021 Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 11:Determination of content of respirable particles 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第11部分:可吸入颗粒含量的测定 - 英文版 |
||
GB/T 39748.10-2021 Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测定方法 第10部分:电位滴定法测定可萃取聚合物量 - 英文版 |
||
GB/T 41104.2-2021 Solder wire, solid and flux cored -- Specification and test methods -- Part 2: Determination of flux content 实心和药芯软钎料丝? 规范和试验方法? 第2部分:钎剂含量的测定 - 英文版 |
||
GB/T 1927.4-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 4: Determination of moisture content 无疵小试样木材物理力学性质试验方法 第4部分:含水率测定 - 英文版 |
||
GB/T 40813-2021 Information security technology—Security protection technical requirements and testing evaluation methods of industrial control systems 信息安全技术 工业控制系统安全防护技术要求和测试评价方法 - 英文版 |
||
GB/T 37854-2019 Wide-mouth glass containers—Deviation from flatness of top sealing surface—Test methods 广口玻璃容器 封合面平面度偏差 试验方法 - 英文版 |
||
GB/T 37852-2019 Class containers—Height and non-parallelism of finish with reference to container base—Test methods 玻璃容器 以容器底部作基准的高度和口部不平行度 试验方法 - 英文版 |
||
GB/T 37417-2019 Maritime navigation and radiocommunication equipment and systems—Track control systems—Operational and performance requirements,methods of testing and required test results 海上导航和无线电通信设备及系统 航迹控制系统 操作和性能要求、测试方法及要求的测试结果 - 英文版 |
||
GB/T 34520.2-2017 Test methods for continuous silicon carbide fiber—Part 2:Diameter of single-filament fiber 连续碳化硅纤维测试方法 第2部分:单纤维直径 - 英文版 |
||
GB/T 34520.1-2017 Test methods for continuous silicon carbide fiber—Part 1:Size content of filament yarn 连续碳化硅纤维测试方法 第1部分:束丝上浆率 - 英文版 |
||
GB/T 34520.5-2017 Test methods for continuous silicon carbide fiber—Part 5:Tensile properties of single-filament fiber 连续碳化硅纤维测试方法 第5部分:单纤维拉伸性能 - 英文版 |
||
GB/T 34520.4-2017 Test methods for continuous silicon carbide fiber—Part 4:Tensile properties of filament yarn 连续碳化硅纤维测试方法 第4部分:束丝拉伸性能 - 英文版 |
||
GB/T 18271.3-2017 Process measurement and control devices—General methods and procedures for evaluating performance—Part 3: Tests for the effects of influence quantities 过程测量和控制装置 通用性能评定方法和程序 第3部分:影响量影响的试验 - 英文版 |
||
GB/T 33740-2017 Mobile payment—Test methods of contactless radio frequency interface based on 2.45GHz range controlled communication technology 手机支付 基于2.45GHz RCC(限域通信)技术的非接触射频接口测试方法 - 英文版 |
||
GB/T 33739-2017 Test methods for radio frequency interface of contactless reader based on 13.56MHz and 2.45GHz dual-frequency technology 基于13.56MHz和2.45GHz双频技术的非接触式读写器射频接口测试方法 - 英文版 |
||
GB/T 35241-2017 Test methods for volatile content of ultraviolet curable coatings for wood products 木质制品用紫外光固化涂料挥发物含量的检测方法 - 英文版 |
||
GB/T 22638.8-2016 Test methods for aluminum and aluminum alloy foils-Part 8: Determination of cube texture content 铝箔试验方法 第8部分:立方面织构含量的测定 - 英文版 |
||
GB/T 5586-2016 Test methods for essential property of electrical contact materials 电触头材料基本性能试验方法 - 英文版 |
||
GB/T 12496.19-2015 Test methods of wooden activated carbon—Determination of iron content 木质活性炭试验方法 铁含量的测定 - 英文版 |
||
GB/T 29247-2012 General methods for testing the performance of industrial process measurement and control instruments 工业自动化仪表通用试验方法 - 英文版 |
||
GB/T 27797.2-2011 Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding 纤维增强塑料 试验板制备方法 第2部分:接触和喷射模塑 - 英文版 |
||
GB/T 6616-2009 Test methods for measuring resistivity of semiconductor wafers or sheet resistance of semiconductor films with a noncontact eddy-current gauge 半导体硅片电阻率及硅薄膜薄层电阻测试方法 非接触涡流法 - 英文版 |
||
GB/T 24268-2009 Test methods for chemical analysis of silver-tin oxide electric contact material 银氧化锡电触头材料化学分析方法 - 英文版 |
||
GB/T 13255.8-2009 Test methods of caprolactam for industrial use - Part 8: Determination of cyclohexanone oxime content 工业用己内酰胺试验方法 第8部分:环己酮肟含量的测定 - 英文版 |
||
GB/T 13255.7-2009 Test methods of caprolactam for industrial use - Part 7: Determination of iron content 工业用己内酰胺试验方法 第7部分:铁含量的测定 - 英文版 |
||
GB/T 13255.4-2009 Test methods of caprolactam for industrial use - Part 4: Determination of volatile bases content - Titrimetric method after distillation 工业用己内酰胺试验方法 第4部分:挥发性碱含量的测定 蒸馏后滴定法 - 英文版 |
||
GB/T 23296.1-2009 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and th 食品接触材料 塑料中受限物质 塑料中物质向食品及食品模拟物特定迁移试验和含量测定方法以及食品模拟物暴露条件选择的指南 - 英文版 |
||
GB/T 4909.9-2009 Test methods for bare wires - Part 9: Test for continuity of coating - Sodium polysulfide solution method 裸电线试验方法 第9部分:镀层连续性试验 多硫化钠法 - 英文版 |
||
GB/T 4909.10-2009 Test methods for bare wires - Part 10: Test for continuity of coating - Ammonium persulphate solution method 裸电线试验方法 第10部分:镀层连续性试验 过硫酸铵法 - 英文版 |
||
GB/T 11213.7-2008 Test methods of sodium hydroxide for chemical fiber use -Part 7:Determination of copper content-spectrometric method 化纤用氢氧化钠试验方法 第7部分:铜含量的测定 分光光度法 - 英文版 |
||
GB/T 20432.6-2008 Photography - Photographic-grade chemicals - Test methods - Part 6: Determination of halide content 摄影 照相级化学品 试验方法 第6部分: 卤化物含量的测定 - 英文版 |
||
GB/T 17473.1-2008 Test methods of precious metals pastes used for microelectronics-Determination of solids content 微电子技术用贵金属浆料测试方法 固体含量测定 - 英文版 |
||
GB/T 15072.7-2008 Test methods of precious metal alloys - Determination of chromium and iron contents for gold alloys - Inductively coupled plasma atomic emission spectrometry 贵金属合金化学分析方法 金合金中铬和铁量的测定 电感耦合等离子体原子发射光谱法 - 英文版 |
||
GB/T 4545-2007 Test methods for stress examination of glass containers 玻璃瓶罐内应力试验方法 - 英文版 |
||
GB/T 20432.5-2007 Photography Photographic-grade chemicals - Test methods Part 5: Determination of heavy metals and iron content 摄影 照相级化学品 试验方法 第5部分:重金属和铁含量的测定 - 英文版 |
Find out:69Items | To Page of: First -Previous-Next -Last | 1 2 |