Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
 

China Valve GB Standards Search Result

1. Ready translated GB standards and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .
     
GB/T 28636-2012
Heating and air conditioning system hydraulic balance Valve
采暖与空调系统水力平衡阀 - 英文版
GB/T 28572-2012
Series of large and medium inletValves of hydraulic turbine
大中型水轮机进水阀门系列 - 英文版
GB/T 28563-2012
Electrical testing of thyristor Valves for ±800kV ultra high voltage direct current (UHVDC) power transmission
±800kV特高压直流输电用晶闸管阀电气试验 - 英文版
GB/T 28494-2012
Globe Valves of thermoplastics materials
热塑性塑料截止阀 - 英文版
GB/T 14478-2012
Fundamental technical requirements for large and medium inlet Valves of hydraulic turbine
大中型水轮机进水阀门基本技术条件 - 英文版
GB/T 50775-2012
Code for construction and acceptance of converter Valve in converter station at ±800KV and below
±800KV及以下换流站换流阀施工及验收规范 - 英文版
GB 28379-2012
Minimum allowable values of water efficiency and water efficiency grades for flush Valve for water closets
便器冲洗阀用水效率限定值及用水效率等级 - 英文版
GB/T 28270-2012
Intelligent Valve electric actuator
智能型阀门电动装置 - 英文版
GB/T 8243.9-2012
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain Valve tests
内燃机全流式机油滤清器试验方法 第9部分:进、出口止回阀试验 - 英文版
GB/T 28259-2012
Petroleum and natural gas industries - Downhole equipment - Subsurface safety Valve equipment
石油天然气工业 井下设备 井下安全阀 - 英文版
GB 15383-2011
Connection types and dimensions for gas cylinder Valve outlets
气瓶阀出气口连接型式和尺寸 - 英文版
GB/T 27734-2011
Polypropylene(PP)Valves for pipes under pressure - Basic dimensions - Metric series
压力管道用聚丙烯(PP)阀门 基本尺寸 公制系列 - 英文版
GB/T 27726-2011
Thermoplastics Valves - Pressure test methods and requirements
热塑性塑料阀门压力试验方法及要求 - 英文版
GB/T 27725-2011
Butterfly Valves of thermoplastics materials
热塑性塑料蝶阀 - 英文版
GB/T 10002.3-2011
Valves made of unplasticized poly(vinyl chloride)(PVC-U)for water supply
给水用硬聚氯乙烯(PVC-U)阀门 - 英文版
GB/T 25753.3-2011
Vacuum technology - Roots vacuum pump - Measurement of performance characteristics - Part 3: Measurement of overflow Valve differential pressure
真空技术 罗茨真空泵性能测量方法 第3部分:溢流阀压差的测量 - 英文版
GB 5135.17-2011
Automatic sprinkler system - Part 17:Pressure reducing Valves
自动喷水灭火系统 第17部分:减压阀 - 英文版
GB 26640-2011
Specification for minimal thickness of the shell of Valves
阀门壳体最小壁厚尺寸要求规范 - 英文版
GB/T 26715-2011
Biogas Valve
沼气阀 - 英文版
GB/T 26482-2011
Fire type-testing requirement for check Valves
止回阀 耐火试验 - 英文版
GB/T 26481-2011
Valve test for fugitive emissions
阀门的逸散性试验 - 英文版
GB/T 26480-2011
Valve inspection and testing
阀门的检验和试验 - 英文版
GB/T 26479-2011
Fire test for soft-seated quarter-turn Valves
弹性密封部分回转阀门 耐火试验 - 英文版
GB/T 26478-2011
Globe Valves for ammonia and lift check valves
氨用截止阀和升降式止回阀 - 英文版
GB/T 18691.5-2011
Agricultural irrigation equipment - Irrigation Valves - Part 5: Control valves
农业灌溉设备 灌溉阀 第5部分:控制阀 - 英文版
GB/T 18691.4-2011
Agricultural irrigation equipment - Irrigation Valves - Part 4: Air valves
农业灌溉设备 灌溉阀 第4部分:进排气阀 - 英文版
GB/T 18691.3-2011
Agricultural irrigation equipment - Irrigation Valves - Part 3: Check valves
农业灌溉设备 灌溉阀 第3部分:止回阀 - 英文版
GB/T 18691.2-2011
Agricultural irrigation equipment - Irrigation Valves - Part 2: Isolating valves
农业灌溉设备 灌溉阀 第2部分:隔离阀 - 英文版
GB/T 18691.1-2011
Agricultural irrigation equipment - Irrigation Valves - Part 1: General requirements
农业灌溉设备 灌溉阀 第1部分:通用要求 - 英文版
GB/T 26147-2010
Specification for ball of ball Valve
球阀球体 技术条件 - 英文版
GB/T 26146-2010
Eccentric stmi-ball Valve
偏心半球阀 - 英文版
GB/T 26145-2010
Drain Valve
排污阀 - 英文版
GB/T 26144-2010
Liner fluoroplatics for flanged ang wafer steel butterfly Valve
法兰和对夹连接钢制衬氟塑料蝶阀 - 英文版
GB/T 26142.2-2010
Pneumatic fluid power - Five-port directional control Valves,sizes 18mm and 26mm - Part 2: Mounting interface surfaces with optional electrical connector
气动五通方向控制阀 规格18mm和26mm 第2部分:带可选电气接头的安装面 - 英文版
GB/T 26142.1-2010
Pneumatic fluid power - Five-port directional control Valves,sizes 18mm and 26mm - Part 1: Mounting interface surfaces without electrical connector
气动五通方向控制阀 规格18mm和26mm 第1部分:不带电气接头的安装面 - 英文版
GB/T 17213.17-2010
Industrial-process control Valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery
工业过程控制阀 第2-5部分:流通能力 流体流经级间恢复多级控制阀的计算公式 - 英文版
GB/T 26024-2010
Seamless copper and copper alloys tube for Valves on air-conditioning and refrigeration system
空调与制冷系统阀件用铜及铜合金无缝管 - 英文版
GB 25974.3-2010
Powered support for coal mine - Part 3:The hydraulic control system and Valves
煤矿用液压支架 第3部分:液压控制系统及阀 - 英文版
GB/T 25754-2010
Vacuum technology - Right-angle Valve - Dimensions and interfaces for pneumatic actuator
真空技术 直角阀 尺寸和气动装置的接口 - 英文版
GB/T 25739-2010
Technical guideline of Valves commissioning for nuclear power plant
核电厂阀门调试技术导则 - 英文版
GB 22380.3-2010
Explosion protected safety technique of the petrol filling station - Part 3: Safety requirements for construction and performance of shear Valves
燃油加油站防爆安全技术 第3部分:剪切阀结构和性能的安全要求 - 英文版
GB/T 5771-2010
Delivery Valve of diesel fuel injection pump - Specifications
柴油机喷油泵出油阀偶件 技术条件 - 英文版
GB/T 25429-2010
Specification for drill string non-return Valve
钻具止回阀规范 - 英文版
GB/T 25126-2010
Large capacity cross-electromagnetic four-way reversing Valve
大容量交叉式电磁四通换向阀 - 英文版
GB/T 24925-2010
Cryogenic Valve technical specifications
低温阀门 技术条件 - 英文版
GB/T 24924-2010
Resilient-seated gate Valves for water supply service
供水系统用弹性密封闸阀 - 英文版
GB/T 24923-2010
Technical specifications of basic version electric Valve actuators
普通型阀门电动装置技术条件 - 英文版
GB/T 24922-2010
Technical specifications of explosion-proof version electric Valve actuators
隔爆型阀门电动装置技术条件 - 英文版
GB/T 24921.2-2010
Sizing,selection,and installation of pressure relieving Valves for petrochemical industries - Part 2: Installation
石化工业用压力释放阀的尺寸确定、选型和安装 第2部分:安装 - 英文版
GB/T 24921.1-2010
Sizing,selection and installation of pressure reliev Valves for petrochemical industries - Part 1: Sizing and selection
石化工业用压力释放阀的尺寸确定、选型和安装 第1部分:尺寸的确定和选型 - 英文版

Find out:411Items   |  To Page of: First -Previous-Next -Last  | 1 2 3 4 5 6 7 8 9

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved