Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
 

China Engines GB Standards Search Result

1. Ready translated GB standards and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .
         
GB/T 8190.9-2017
Reciprocating internal combustion Engines—Exhaust emission measurement—Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
往復式內燃機 排放測量 第9部分:壓燃式發動機瞬態工況排氣煙度的試驗台測量用試驗迴圈和測試規程 - 英文版
GB/T 35348-2017
Diesel Engines—Fuel filters—Method for evaluating fuel/water separation efficiency
柴油機 燃油濾清器 油/水分離效率的評定方法 - 英文版
GB/T 1859.4-2017
Reciprocating internal combustion Engines—Measurement of sound power levels using sound pressure—Part 4:Survey method using a reference sound source
往復式內燃機 聲壓法聲功率級的測定 第4部分:使用標準聲源簡易法 - 英文版
GB/T 8243.6-2017
Methods of test for full-flow lubricating oil filters for internal combustion Engines—Part 6: Static burst pressure test
內燃機全流式機油濾清器試驗方法 第6部分:靜壓耐破度試驗 - 英文版
GB/T 8243.7-2017
Methods of test for full-flow lubricating oil filters for internal combustion Engines—Part 7:Vibration fatigue test
內燃機全流式機油濾清器試驗方法 第7部分:振動疲勞試驗 - 英文版
GB/T 8188-2017
Reciprocating internal combustion Engines—Emissions terminology and nomenclature
往復式內燃機 排放術語和定義 - 英文版
GB/T 33928-2017
Reciprocating internal combustion Engines—Measurement method for exhaust silencers—Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio
往復式內燃機 排氣消聲器測量方法 聲壓法排氣雜訊聲功率級和插入損失及功率損失比 - 英文版
GB/T 1147.2-2017
Small and medium power internal combustion Engines—Part 2: Test methods
中小功率內燃機 第2部分:試驗方法 - 英文版
GB/T 35358.2-2017
Inlet air cleaning equipment for vehicle Engines and compressors—Part 2: Fractional efficiency testing with coarse particles(5 μm to 40 μm optical diameter)
汽車發動機和壓縮機進氣空氣濾清裝置 第2部分:粗顆粒分級效率測試(5μm到40μm) - 英文版
GB/T 35358.1-2017
Inlet air cleaning equipment for vehicle Engines and compressors—Part 1: Fractional efficiency testing with fine particles(0.3 μm to 5 μm optical diameter)
汽車發動機和壓縮機進氣空氣濾清裝置 第1部分:細顆粒分級效率測試(0.3μm到5μm) - 英文版
GB/T 1149.15-2017
Internal combustion Engines—Piston rings—Part 15: Coil-spring-loaded oil control rings of narrow width made of cast iron
內燃機 活塞環 第15部分:薄型鑄鐵螺旋撐簧油環 - 英文版
GB/T 35363-2017
Diesel fuel and petrol filters for vehicle Engines—The test method for filtration efficiency and contaminant retention capacity—Method of particle counting
汽車發動機柴油濾清器和汽油濾清器 濾清效率和納汙容量的測定方法 顆粒計數法 - 英文版
GB/T 1147.1-2017
Small and medium power internal combustion Engines—Part 1: General requirements
中小功率內燃機 第1部分:通用技術條件 - 英文版
GB/T 18948-2017
Rubber hoses and tubing for cooling systems for internal-combustion Engines—Specification
內燃機冷卻系統用橡膠軟管和純膠管 規範 - 英文版
GB/T 34600-2017
The technical specification for remanufacturing of automotive components—Spark and compression ignition Engines
汽車零部件再製造產品技術規範 點燃式、壓燃式發動機 - 英文版
GB/T 34586-2017
Road vehicles—Spark-plugs for gas Engines—Test methods and requirements
道路車輛 燃氣火花塞 試驗方法和要求 - 英文版
GB/T 33485-2017
Large yachts—Diesel Engines for main propulsion and essential auxiliaries—Safety requirements
大型遊艇 主輔柴油機 安全要求 - 英文版
GB/T 33349-2016
General specification for gas electric power plant system with reciprocating internal combustion Engines
往復式內燃燃氣電站系統通用技術條件 - 英文版
GB 15097-2016
Limits and measurement methods for exhaust pollutants from marine Engines (CHINAⅠ、Ⅱ)
船舶發動機排氣污染物排放限值及測量方法(中國第一、二階段) - 英文版
GB/T 6809.5-2016
Reciprocating internal combustion Engines—Vocabulary of components and systems—Part 5: Cooling systems
往復式內燃機 零部件和系統術語 第5部分:冷卻系統 - 英文版
GB/T 1859.1-2015
Reciprocating internal combustion Engines—Measurement of sound power level using sound pressure—Part 1: Engineering method
往復式內燃機 聲壓法聲功率級的測定 第1部分:工程法 - 英文版
GB/T 1859.3-2015
Reciprocating internal combustion Engines—Measurement of sound power level using sound pressure—Part 3: Precision methods for hemi-anechoic rooms
往復式內燃機 聲壓法聲功率級的測定 第3部分:半消聲室精密法 - 英文版
GB/T 8243.13-2015
Methods of test for full-flow lubricating oil filters for internal combustion Engines—Part 13: Static burst pressure test for composite filter housings
內燃機全流式機油濾清器試驗方法 第13部分:複合材料濾清器的靜壓耐破度試驗 - 英文版
GB/T 1149.16-2015
Internal combustion Engines—Piston rings—Part 16: Expander/segment oil-control rings
內燃機 活塞環 第16部分:鋼帶組合油環 - 英文版
GB/T 20064.1-2015
Reciprocating internal combustion Engines—Handle starting equipment—Part 1: Safety requirements and tests
往復式內燃機 手柄起動裝置 第1部分:安全要求和試驗 - 英文版
GB/T 1859.2-2015
Reciprocating internal combustion Engines—Measurement of sound power level using sound pressure—Part 2: Survey method
往復式內燃機 聲壓法聲功率級的測定 第2部分:簡易法 - 英文版
GB/T 3821-2015
Small and medium power internal combustion Engines—Cleanliness limits and measurements
中小功率內燃機 清潔度限值和測定方法 - 英文版
GB 20891-2014
Limits and measurement methods for exhaust pollutants from diesel Engines of non-road mobile machinery(CHINA Ⅲ、Ⅳ)
非道路移動機械用柴油機排氣污染物排放限值及測量方法(中國第三、四階段) - 英文版
GB 20651.2-2014
Reciprocating internal combustion Engines―safety―Part 2: Spark ignition engines
往復式內燃機 安全 第2部分:點燃式發動機 - 英文版
GB/T 6809.9-2013
Reciprocating internal combustion Engines―Vocabulary of components and systems―Part 9: Control and monitoring systems
往復式內燃機 零部件和系統術語 第9部分:監控系統 - 英文版
GB/T 1149.10-2013
Internal combustion Engines-Piston rings―Part 10: Keystone rings made of steel
內燃機 活塞環 第10部分:梯形鋼環 - 英文版
GB/T 30138-2013
Design code for exhaust and cooling water heat recovery system of gas electric power plant with reciprocating internal combustion Engines
往復式內燃燃氣電站餘熱利用系統設計規範 - 英文版
GB 29518-2013
Diesel Engines NOx reduction agent - Aqueous urea solution (AUS 32)
柴油發動機氮氧化物還原劑 尿素水溶液(AUS 32) - 英文版
GB/T 6809.3-2013
Reciprocating internal combustion Engines―Vocabulary of components and systems―Part 3: Main running gear
往復式內燃機 零部件和系統術語 第3部分:主要運動件 - 英文版
GB/T 6809.2-2013
Reciprocating internal combustion Engines—Vocabulary of components and systems—Part 2: Valves,camshaft drives and actuating mechanisms
往復式內燃機 零部件和系統術語 第2部分:氣門、凸輪軸傳動和驅動機構 - 英文版
GB/T 30462-2013
Remanufactured non-road internal combustion Engines―General specifications
再製造非道路用內燃機 通用技術條件 - 英文版
GB/T 1149.12-2013
Internal combustion Engines―Piston rings―Part 12: Half keystone rings made of steel
內燃機 活塞環 第12部分:楔形鋼環 - 英文版
GB/T 28793-2012
Technical requirements of fuel saving for fishing vessel diesel Engines
漁業船舶柴油機節油技術要求 - 英文版
GB/T 28790-2012
Technical requirements and measuring methods of fuel saving devices for diesel Engines of fishing vessel
漁業船舶柴油機節油裝置技術條件及檢測方法 - 英文版
GB/T 28953-2012
Automotive diesel - Spin-on fuel filters for diesel Engines - Mounting and connecting dimensions
汽車柴油機 旋裝式燃油濾清器 安裝和連接尺寸 - 英文版
GB/T 28949-2012
Inlet air cleaning equipment for internal combustion Engines and compressors - Performance testing
內燃機和空氣壓縮機用進氣空氣濾清器 性能試驗 - 英文版
GB/T 28950.2-2012
Road vehicles and internal combustion Engines - Filter vocabulary - Part 2: Definitions of characteristics of filters and their components
道路車輛和內燃機 濾清器名詞術語 第2部分:濾清器及其部件性能指標定義 - 英文版
GB/T 1151-2012
Internal combustion Engines - Main and connecting rod bearings - Specifications
內燃機 主軸瓦及連杆軸瓦 技術條件 - 英文版
GB/T 28954-2012
Automotive Engines - Spin-on filters for lubricating oil - Connect dimensions
汽車發動機 旋裝式機油濾清器 連接尺寸 - 英文版
GB/T 28961-2012
Automotive diesel - Two-stage fuel filters for Compression-ignition Engines - Mounting and connecting dimensions
汽車柴油機 雙級燃油濾清器 安裝和連接尺寸 - 英文版
GB/T 8243.9-2012
Methods of test for full-flow lubricating oil filters for internal combustion Engines - Part 9: Inlet and outlet anti-drain valve tests
內燃機全流式機油濾清器試驗方法 第9部分:進、出口止回閥試驗 - 英文版
GB/T 29130-2012
Ships-tachomaters for marine Engines
船用發動機轉速表 - 英文版
GB/T 6072.4-2012
Reciprocating internal combustion Engines - Performance - Part 4: Speed governing
往復式內燃機 性能 第4部分:調速 - 英文版
GB/T 28950.1-2012
Road vehicles and internal combustion Engines - Filter vocabulary - Part 1: Definitions of filters and filter components
道路車輛和內燃機 濾清器名詞術語 第1部分:濾清器和濾清器部件定義 - 英文版
GB/T 8190.5-2011
Reciprocating internal combustion Engines - Exhaust emission measurement - Part 5: Test fuels
往復式內燃機 排放測量 第5部分:試驗燃料 - 英文版

Find out:179Items   |  To Page of: First -Previous-Next -Last  | 1 2 3 4

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330        info@transcustoms.com 
©  Copyright 2001-2018  RJS MedTech Inc. All Rights Reserved