Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
 

China Fluid GB Standards Search Result

1. Ready translated GB standards and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .
       
GB/Z 33902-2017
Measurement of Fluid flow by means of pressure differential devices—Guidelines on the effect of departure from the specifications and operating conditions given in GB/T 2624 and the correction methods
使用差壓裝置測量流體流量 偏離GB/T2624給出的要求和工作條件的影響及其修正方法 - 英文版
GB/T 7932-2017
Pneumatic Fluid power-General rules and safety requirements for systems and their components
氣動 對系統及其元件的一般規則和安全要求 - 英文版
GB/T 22381-2017
Cable connections between gas-insulated metal-enclosed switchgear for rated voltages equal to and above 72.5kV and Fluid-filled and extruded insulation power cables—Fluid-filled and dry type cable-terminations
額定電壓72.5kV及以上氣體絕緣金屬封閉開關設備與充流體及擠包絕緣電力電纜的連接 充流體及幹式電纜終端 - 英文版
GB/T 33581-2017
Petroleum and natural gas industries—Drilling Fluids—Processing equipment evaluation
石油天然氣工業 鑽井液 固控設備評價 - 英文版
GB/T 34041.2-2017
Measurement of Fluid flow in closed conduits—Ultrasonic meters for gas—Part 2: Meters for industrial applications
封閉管道中流體流量的測量 氣體超聲流量計 第2部分:工業測量用氣體超聲流量計 - 英文版
GB/T 33636-2017
Pneumatic Fluid power—Push-in connectors for plastic tubes
氣動 用於塑膠管的插入式管接頭 - 英文版
GB/T 33753-2017
General specification for rotary automatic filling-capping machine for high viscosity Fluid
回轉式全自動粘流體灌裝封蓋機通用技術要求 - 英文版
GB/T 17213.2-2017
Industrial-process control valves—Part 2-1: Flow capacity—Sizing equations for Fluid flow under installed conditions
工業程序控制閥 第2-1部分:流通能力 安裝條件下流體流量的計算公式 - 英文版
GB/T 14513.1-2017
Pneumatic Fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow
氣動 使用可壓縮流體元件的流量特性測定 第1部分:穩態流動的一般規則和試驗方法 - 英文版
GB/T 15623.2-2017
Hydraulic Fluid power—Electrically modulated hydraulic control valves—Part 2: Test methods for three-port directional flow-control valves
液壓傳動 電調製液壓控制閥 第2部分:三通方向流量控制閥試驗方法 - 英文版
GB/T 34352-2017
Cleaning guide for the boiler and system with organic heat transfer Fluids
有機熱載體鍋爐及系統清洗導則 - 英文版
GB/T 34041.1-2017
Measurement of Fluid flow in closed conduits—Ultrasonic meters for gas—Part 1: Meters for custody transfer and allocation measurement
封閉管道中流體流量的測量 氣體超聲流量計 第1部分:貿易交接和分輸計量用氣體超聲流量計 - 英文版
GB/T 35138-2017
Measurement of Fluid flow in closed conduits—Ultrasonic transit-time meters for liquid
封閉管道中流體流量的測量 渡越時間法液體超聲流量計 - 英文版
GB/T 34552-2017
Municipal solid waste Fluidized bed incineration boiler
生活垃圾流化床焚燒鍋爐 - 英文版
GB/T 34887-2017
Hydraulic Fluid power—Test code for the determination of noise level of hydraulic motors
液壓傳動 馬達雜訊測定規範 - 英文版
GB/Z 35140-2017
Measurement of Fluid flow by means of pressure-differential devices—Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of GB/T 2624
用差壓裝置測量流體流量 GB/T 2624範圍之外的孔板、噴嘴和文丘裡管的使用指南 - 英文版
GB/T 2878.3-2017
Connections for hydraulic Fluid power—Ports and stud ends with metric threads and O-ring sealing—Part 3: light-duty stud ends (L series)
液壓傳動連接 帶米制螺紋和O形圈密封的油口和螺柱端 第3部分:輕型螺柱端(L系列) - 英文版
GB/T 35307-2017
Granular polysilicon produced by Fluidized bed method
流化床法顆粒矽 - 英文版
GB/T 32958-2016
Stainless steel clad pipes for Fluid transport
流體輸送用不銹鋼複合鋼管 - 英文版
GB/T 32812-2016
Metal working Fluid—Limit requirements and determination methods of hazardous substance
金屬加工液 有害物質的限量要求和測定方法 - 英文版
GB/T 32216-2015
Hydraulic Fluid power—Test method for the proportional/servo controlled hydraulic cylinder
液壓傳動 比例/伺服控制液壓缸的試驗方法 - 英文版
GB/T 31940-2015
Bi-metal composite corrosion resistance steel pipe for Fluid transportation
流體輸送用雙金屬複合耐腐蝕鋼管 - 英文版
GB/T 3766-2015
Hydraulic Fluid power—General rules and safety requirements for systems and their components
液壓傳動 系統及其元件的通用規則和安全要求 - 英文版
GB/T 51094-2015
Technical code for Fluid seal gas holder of industrial enterprises
工業企業濕式氣櫃技術規範 - 英文版
GB/T 32215-2015
Pneumatic Fluid power—Identification of ports and control mechanisms of control valves and other components
氣動 控制閥和其他元件的氣口和控制機構的標識 - 英文版
GB/T 32292-2015
Vacuum techology—FerroFluid rotary feedthroughs—Generic specification
真空技術 磁流體動密封件 通用技術條件 - 英文版
GB/T 18854-2015
Hydraulic Fluid power—Calibration of automatic particle counters for liquids
液壓傳動 液體自動顆粒計數器的校準 - 英文版
GB/T 32336-2015
Pneumatic Fluid power—Basic,mounting and accessories dimensions of cylinders with detachable mountings, bores from 32mm to 320mm
氣動 帶可拆卸安裝件的缸徑32mm至320mm的氣缸基本尺寸、安裝尺寸和附件尺寸 - 英文版
GB/T 6075.4-2015
Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 4: Gas turbine sets with Fluid-film bearings
機械振動 在非旋轉部件上測量評價機器的振動 第4部分:具有滑動軸承的燃氣輪機組 - 英文版
GB/T 32217-2015
Hydraulic Fluid power—Sealing devices—Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications
液壓傳動 密封裝置 評定液壓往復運動密封件性能的試驗方法 - 英文版
GB/T 18853-2015
Hydraulic Fluid power filters—Multi-pass method for evaluating filtration performance of a filter element
液壓傳動篩檢程式 評定濾芯過濾性能的多次通過方法 - 英文版
GB/T 31469-2015
Semiconductor materials cutting Fluid
半導體材料切削液 - 英文版
GB/T 32337-2015
Pneumatic Fluid power—Mounting interface surfaces of 3/2 solenoid valves
氣動 二位三通電磁閥安裝面 - 英文版
GB/T 32193-2015
Standard practice for testing flame ionization detectors used in gas or supercritical Fluid chromatography
氣相色譜/超臨界流體色譜用火焰離子化檢測器測試方法 - 英文版
GB/T 11348.4-2015
Mechanical vibration—Evaluation of machine vibration by measurements on rotating shafts—Part 4: Gas turbine sets with Fluid-film bearings
機械振動 在旋轉軸上測量評價機器的振動 第4部分:具有滑動軸承的燃氣輪機組 - 英文版
GB 50972-2014
Code for construction and quality acceptance of circulating Fluidized-bed boiler
迴圈流化床鍋爐施工及品質驗收規範 - 英文版
GB/T 31026-2014
Cleaning Fluid for motor vehicle engine lubrication system
機動車發動機潤滑系清洗液 - 英文版
GB/T 5250-2014
Permeable sintered metal materials―Determination of Fluid permeability
可滲透性燒結金屬材料 流體滲透性的測定 - 英文版
GB/T 31025-2014
Cleaning Fluid for motor vehicle engine surface
機動車發動機外表面清洗液 - 英文版
GB/T 16783.1-2014
Petroleum and natural gas industries―Field testing of drilling Fluids―Part 1: Water-based fluids
石油天然氣工業 鑽井液現場測試 第1部分:水基鑽井液 - 英文版
GB/T 7631.12-2014
Lubricants,industrial oils and related prouducts (class L)-Clasification―Part 12: Family Q (Heat transfer Fluids)
潤滑劑、工業用油和有關產品(L類)的分類 第12部分:Q組(有機熱載體) - 英文版
For Sale!
GB/T 30833-2014
Pneumatic Fluid power―Compressible fluids consumed by equipment―Power determination and measurement of compressible air
氣壓傳動 設備消耗的可壓縮流體 壓縮空氣功率的表示及測量 - 英文版
GB/T 14514-2013
Test methods of pneumatic Fluid power fittings
氣動管接頭試驗方法 - 英文版
GB/T 30206.3-2013
Aerospace Fluid systems vocabulary―Part 3: General terms and definitions relating to temperature
航空航太流體系統詞彙 第3部分:溫度相關的通用術語和定義 - 英文版
GB/T 30113.1-2013
Optical measurement methods on flow field in microgravity Fluid physics―Part 1:Shadowgraph and Schlieren
空間微重力流體物理 流場光學測量技術規範 第1部分:陰影法、紋影法 - 英文版
GB/T 30206.2-2013
Aerospace Fluid systems vocabulary―Part 2: General terms and definitions relating to flow
航空航太流體系統詞彙 第2部分:流量相關的通用術語和定義 - 英文版
GB/T 30206.1-2013
Aerospace Fluid systems vocabulary—Part 1: General terms and definitions relating to pressure
航空航太流體系統詞彙 第1部分:壓力相關的通用術語和定義 - 英文版
GB/T 29721-2013
Specifications of coal for Fluidized bed gasifier
流化床氣化用原料煤技術條件 - 英文版
GB/T 30243-2013
Measurement of Fluid flow in closed conduits—Specifications for V-cone pressure differential flow measuring device
封閉管道中流體流量的測量 V形內錐流量測量節流裝置 - 英文版
GB/T 10544-2013
Rubber hoses and hose assemblies—Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based Fluids—Specification
橡膠軟管及軟管組合件 油基或水基流體適用的鋼絲纏繞增強外覆橡膠液壓型 規範 - 英文版

Find out:242Items   |  To Page of: First -Previous-Next -Last  | 1 2 3 4 5

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330        info@transcustoms.com 
©  Copyright 2001-2018  RJS MedTech Inc. All Rights Reserved