Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
 

China joint GB Standards Search Result

1. Ready translated GB standards and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .
         
GB/T 51217-2017
technical specification for joint construction and sharing of transmission lines
通信傳輸線路共建共用技術規範 - 英文版
GB/T 35367-2017
X-ray radiography technique and quality classification for titanium butt weld joints on submersible
潛水器鈦合金對接焊縫X射線檢測及品質分級 - 英文版
GB/T 34630.2-2017
Friction stir welding—Aluminium and its alloys—Part 2:Design of weld joints
攪拌摩擦焊 鋁及鋁合金 第2部分:焊接接頭設計 - 英文版
GB/T 21140-2017
Non-structural finger jointed lumber
非結構用指接材 - 英文版
GB/T 34027-2017
Universal joint shaft for main drive of hot continuous rolling mill
熱連軋主傳動十字軸式萬向聯軸器 - 英文版
GB/T 33628-2017
Wind turbine generator systems—Assembly requirements for high-strength-bolted joint
風力發電機組 高強螺紋連接副安裝技術要求 - 英文版
GB/T 33799-2017
Determination of the bond strength of adhesive in engineering-plastic joints
工程塑料用膠粘劑對接強度的測定 - 英文版
GB/T 35361-2017
Ultrasonic testing technique and quality classification for titanium butt weld joints on submersible
潛水器鈦合金對接焊縫超聲波檢測及品質分級 - 英文版
GB/T 51025-2016
Technical code for jointless construction of super-large area slabs-on-ground
超大面積混凝土地面無縫施工技術規範 - 英文版
GB/T 32767-2016
Standard field test for the evaluation of wood preservatives by L-joint
木材防腐劑性能評估的野外地上L連接件試驗方法 - 英文版
GB/T 33214-2016
Laser-arc hybrid welding joints of steels, nickel and nickel alloys—Quality levels for imperfections
鋼、鎳及鎳合金的鐳射-電弧複合焊接接頭 缺欠品質分級指南 - 英文版
GB/T 12772-2016
Cast iron pipes,fittings and accessories with flexible joint sewerage for drainage
排水用柔性介面鑄鐵管、管件及附件 - 英文版
GB/T 33334-2016
Test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies(composite and composite)
膠粘劑單搭接拉伸剪切強度試驗方法(複合材料對複合材料) - 英文版
GB/T 33219-2016
Imperfections in brazed joints
硬釺焊接頭缺欠 - 英文版
GB/T 16939-2016
High strength bolts for joints of space grid structures
鋼網架螺栓球節點用高強度螺栓 - 英文版
GB/T 28267.4-2015
Steel cord conveyor belts—Part 4: Vulcanized belt joints
鋼絲繩芯輸送帶 第4部分:帶的硫化接頭 - 英文版
GB/T 51125-2015
Code for joint construction and sharing of telecommunications stations
通信局站共建共用技術規範 - 英文版
GB/T 31538-2015
Grouting pipe embedment for concrete joint waterproofing
混凝土接縫防水用預埋注漿管 - 英文版
GB/T 32259-2015
Non-destructive testing of welds—Visual testing of fusion-welded joints
焊縫無損檢測 熔焊接頭目視檢測 - 英文版
GB/T 32434-2015
Plastics pipes and fittings—Butt fusion jointing procedures fortpolyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
塑膠管材和管件 燃氣和給水輸配系統用聚乙烯(PE)管材及管件的熱熔對接程式 - 英文版
GB/T 17186.1-2015
Calculation methods for the pipe flange joints—Part 1: Calculation method satisfies both strength and rigidity requirements
管法蘭連接計算方法 第1部分:基於強度和剛度的計算方法 - 英文版
GB/T 31127-2014
Textiles―Tests for colour fastness―Colour fastness to transfer in joints
紡織品 色牢度試驗 拼接互染色牢度 - 英文版
GB/T 29537-2013
Pipe threads with 80 degree thread angle where pressure-tight joints are not made on the threads
80°非密封管螺紋 - 英文版
GB/T 16989-2013
Geosynthetics - Tensile test for joints/seams by wide-width strip method
土工合成材料 接頭/接縫寬條拉伸試驗方法 - 英文版
GB/T 29012-2012
Road construction and road maintenance machinery and equipment - Road joint sealing machine
道路施工與養護機械設備 道路灌縫機 - 英文版
GB/T 29460-2012
Safey assessment for electrofusion joint of polyethylene pipes containing defects
含缺陷聚乙烯管道電熔接頭安全評定 - 英文版
GB/T 29461-2012
Ultrasonic testing for electrofusion joint of polyethylene pipe
聚乙烯管道電熔接頭超聲檢測 - 英文版
GB/T 17889.4-2012
Ladders - Part 4: Single or multiple hinge-joint ladders
梯子 第4部分:帶有單個或多個鉸鏈的梯子 - 英文版
For Sale!
GB/T 16957-2012
Clad teel plats - Mechanical technical tests on welded joints
複合鋼板 焊接接頭力學性能試驗方法 - 英文版
GB/T 12716-2011
Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads
60°密封管螺紋 - 英文版
For Sale!
GB/T 26957-2011
Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints
金屬材料焊縫破壞性試驗 十字形接頭和搭接接頭拉伸試驗方法 - 英文版
GB/T 27572-2011
Rubber seals - joint rings for pipelines for hot-water supply up to 110℃ - Specification for the materials
橡膠密封件 110℃熱水供應管道的管介面密封圈 材料規範 - 英文版
GB/T 27552-2011
Destructive tests on welds in metallic materials - Microhardness testing of welded joints
金屬材料焊縫破壞性試驗 焊接接頭顯微硬度試驗 - 英文版
GB/T 25629-2010
Hydraulic excavator - Central turning hydraulic joint
液壓挖掘機 中央回轉接頭 - 英文版
GB/T 26121-2010
Flexible rubber joint
可曲撓橡膠接頭 - 英文版
GB/T 25774.3-2010
Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint
焊接材料的檢驗 第3部分:T型接頭角焊縫試樣的製備及檢驗 - 英文版
GB/T 9125-2010
Fasteners for pipe flange joints
管法蘭連接用緊固件 - 英文版
For Sale!
GB/T 24746-2009
Technical drawings - Symbolic presentation and indication of adhesive, fold and pressed joints
技術製圖 粘接、彎折與擠壓接合的圖形符號標記法 - 英文版
GB/T 23682-2009
Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation
製冷系統和熱泵 軟管件、隔震管和膨脹接頭 要求、設計與安裝 - 英文版
GB/T 12522-2009
Stainless steel bellows expansion joints
不銹鋼波形膨脹節 - 英文版
GB/T 24496-2009
Grooved vertical joints with connecting bars and concrete infill between large reinforced concrete panels - Laboratory mechanical tests - Effect of tangential loading
鋼筋混凝土大板間有連接筋並用混凝土澆灌的鍵槽式豎向接縫 實驗室力學試驗 平面內切向荷載的影響 - 英文版
GB/T 24495-2009
Horizontal joints between load-bearing walls and concrete floors - Laboratory mechanical tests - Effect of vertical loading and of moments transmitted by the floors
承重牆與混凝土樓板間的水準接縫 實驗室力學試驗 由樓板傳來的垂直荷載和彎矩的影響 - 英文版
GB/T 3410.1-2008
Instrument for dam monitoring joint meter - Part 1: Unbonded elastic wire resistance joint meter
大壩監測儀器 測縫計 第1部分:差動電阻式測縫計 - 英文版
GB/T 2653-2008
Bend test methods on welded joints
焊接接頭彎曲試驗方法 - 英文版
For Sale!
GB/T 2650-2008
Impact test methods on welded joints
焊接接頭衝擊試驗方法 - 英文版
GB/T 22459.3-2008
Refractory mortars - Part 3: Determination of joint stability
耐火泥漿 第3部分:粘接時間試驗方法 - 英文版
GB/T 12605-2008
Non-destructive testing - Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes
無損檢測 金屬管道熔化焊環向對接接頭射線照相檢測方法 - 英文版
GB/T 3410.2-2008
Instrument for dam monitoring - joint meter - Part 2: Vibrating wire joint meter
大壩監測儀器 測縫計 第2部分:振弦式測縫計 - 英文版
GB/T 12417.2-2008
Non-active surgical implants - Osteosynthesis and joint replacement implants - Part 2: Particular requirements for joint replacement implants
無源外科植入物 骨接合與關節置換植入物 第2部分:關節置換植入物特殊要求 - 英文版
GB/T 9326.4-2008
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 4: joint
交流500kV及以下紙或聚丙烯複合紙絕緣金屬套充油電纜及附件 第4部分: 接頭 - 英文版

Find out:111Items   |  To Page of: First -Previous-Next -Last  | 1 2 3

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330        info@transcustoms.com 
©  Copyright 2001-2018  RJS MedTech Inc. All Rights Reserved