Home   GB Standards Search   GB Standards Index GB Standards Testing   GB Standards Compliance Pricing & Payment Contact Us
 

China threads GB Standards Search Result

1. Ready translated GB standards and Chinese version GB Standards, you can purchase directly in the web page; After receive your payment, we will send the GB Standards PDF file to your Email within 1~3 days.
2. Other English version GB Standards are not ready translated, only after get your order, then we translate them, time usually need 3-5 days .
         
GB/T 34632-2017
The blank diameters for rolling unified screw threads
統一螺紋搓制和滾制前的毛坯直徑 - 英文版
GB/T 9253.2-2017
Petroleum and natural gas industries—Threading,gauging and thread inspection of casing,tubing,and line pipe threads
石油天然氣工業 套管、油管和管線管螺紋的加工、測量和檢驗 - 英文版
GB/T 2878.3-2017
Connections for hydraulic fluid power—Ports and stud ends with metric threads and O-ring sealing—Part 3: light-duty stud ends (L series)
液壓傳動連接 帶米制螺紋和O形圈密封的油口和螺柱端 第3部分:輕型螺柱端(L系列) - 英文版
GB/T 18685-2017
The blank diameters for rolling general purpose metric screw threads
普通螺紋搓制和滾制前的毛坯直徑 - 英文版
GB/T 32535-2016
Runouts, undercuts and chamfers for pipe threads
管螺紋收尾、肩距、退刀槽和倒角 - 英文版
GB/T 32537-2016
Runouts, undercuts and chamfers for trapezoidal and buttress threads
梯形和鋸齒形螺紋收尾、肩距、退刀槽和倒角 - 英文版
GB/T 32534-2016
Test methods for taper screw threads
圓錐螺紋檢測方法 - 英文版
GB/T 1414-2013
General purpose metric screw threads - The plan for pipe systems
普通螺紋 管路系列 - 英文版
GB/T 29537-2013
Pipe threads with 80 degree thread angle where pressure-tight joints are not made on the threads
80°非密封管螺紋 - 英文版
GB/T 14791-2013
Screw threads―Vocabulary
螺紋 術語 - 英文版
GB/T 6839-2013
Testing method for lubrication of sewing threads
縫紉線潤滑性試驗方法 - 英文版
GB/T 28272-2012
Metric screw threads with extra fine pitch - Series and basic dimensions
米制超細牙螺紋 系列和基本尺寸 - 英文版
GB/T 28271-2012
Metric screw threads with extra fine pitch - Tolerances
米制超細牙螺紋 公差 - 英文版
GB/T 28466-2012
Polyester filament embroidery threads
滌綸長絲繡花線 - 英文版
GB/T 28703-2012
Test methods for parallel screw threads
圓柱螺紋檢測方法 - 英文版
GB/T 28467-2012
Color card of polyester embroidery threads
滌綸繡花線色卡 - 英文版
GB/T 2878.2-2011
Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 2: heavy-duty stud ends (S series)
液壓傳動連接 帶米制螺紋和O形圈密封的油口和螺柱端 第2部分:重型螺柱端(S系列) - 英文版
GB/T 2878.1-2011
Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 1: Ports
液壓傳動連接 帶米制螺紋和O形圈密封的油口和螺柱端 第1部分:油口 - 英文版
GB/T 27944-2011
Dryseal pipe threads with the thread angle of 60 degrees
60°幹密封管螺紋 - 英文版
GB/T 2878.4-2011
Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 4: Hex plugs
液壓傳動連接 帶米制螺紋和O形圈密封的油口和螺柱端 第4部分:六角螺塞 - 英文版
GB/T 12716-2011
Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads
60°密封管螺紋 - 英文版
For Sale!
GB 8335-2011
Special threads for gas cylinders
氣瓶專用螺紋 - 英文版
GB/T 10878-2011
Special taps of taper threads for gas cylinders
氣瓶錐螺紋絲錐 - 英文版
GB 9765-2009
Tyre valve threads
輪胎氣門嘴螺紋 - 英文版
GB/T 12359-2008
Metric trapezoidal screw threads - Limits of sizes
梯形螺紋 極限尺寸 - 英文版
GB/T 2696-2008
Jute yarns and threads
黃麻紗線 - 英文版
GB/T 22028-2008
Hot-dip galvanized screw threads - On internal screw threads there is the clearance for accommodating the hot-dip galvanized coat
熱浸鍍鋅螺紋 在內螺紋上容納鍍鋅層 - 英文版
GB/T 1415-2008
Metric threads where pressure-tight joints are made on the threads
米制密封螺紋 - 英文版
GB/T 13576.3-2008
Buttress threads with the flank angles of 3 and 30 degrees - Part 3: Basic dimensions
鋸齒形(3°、30°)螺紋 第3部分:基本尺寸 - 英文版
GB/T 13576.2-2008
Buttress threads with the flank angles of 3 and 30 degrees - Part 2: General plan
鋸齒形(3°、30°)螺紋 第2部分:直徑與螺距系列 - 英文版
GB/T 13576.4-2008
Buttress threads with the flank angles of 3 and 30 degrees - Part 4: Tolerances
鋸齒形(3°、30°)螺紋 第4部分:公差 - 英文版
GB/T 22029-2008
Hot-dip galvanized screw threads - On external screw threads there is the clearance for accommodating the hot-dip galvanized coat
熱浸鍍鋅螺紋 在外螺紋上容納鍍鋅層 - 英文版
GB/T 22055.1-2008
Microscopes - Screw threads for objectives and related nosepieces - Part 1: Screw thread type RMS (4/5in×1/36in)
顯微鏡 物鏡螺紋 第1部分:RMS型物鏡螺紋(4/5in×1/36in) - 英文版
GB/T 15756-2008
General purpose metric screw threads - Limits of sizes
普通螺紋 極限尺寸 - 英文版
GB/T 22055.2-2008
Microscopes - Screw threads for objectives and related nosepieces - Part 2: Screw thread type M25×0.75mm
顯微鏡 物鏡螺紋 第2部分:M25×0.75mm型物鏡螺紋 - 英文版
GB/T 13576.1-2008
Buttress threads with the flank angles of 3 and 30 degrees - Part 1: Profiles
鋸齒形(3°、30°)螺紋 第1部分:牙型 - 英文版
GB/T 22091.1-2008
Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 1:Verification of parallel internal and taper external threads
55°密封管螺紋量規 第1部分:用於檢驗圓柱內螺紋與圓錐外螺紋 - 英文版
GB/T 6138.2-2007
Subland twist drills for holes prior to tapping screw threads - Part 2: The types and dimensions of Subland twist drills with Morse typer shanks
攻絲前鑽孔用階梯麻花鑽 第2部分:莫氏錐柄階梯麻花鑽的型式和尺寸 - 英文版
GB/T 6138.1-2007
Subland twist drills for holes prior to tapping screw threads - Part 1: The types and dimensions of subland twist drills with cylindrical shanks
攻絲前鑽孔用階梯麻花鑽 第1部分:直柄階梯麻花鑽的型式和尺寸 - 英文版
GB/T 10954-2006
Turning tools for threads with clamp tips
機夾螺紋車刀 - 英文版
GB/T 20334-2006
Ground thread taps for pipe threads G series and Rp series - Tolerances on the threaded portion
G系列和Rp系列管螺紋磨牙絲錐的螺紋尺寸公差 - 英文版
GB/T 20668-2006
Unified screw threads - Basic dimensions
統一螺紋 基本尺寸 - 英文版
GB/T 20667-2006
Unified screw threads - Limits of sizes
統一螺紋 極限尺寸 - 英文版
GB/T 20330-2006
Drill diameter for use prior to tapping screw threads
攻絲前鑽孔用麻花鑽直徑 - 英文版
GB/T 20324-2006
Circular dies for parallel pipe threads - G series
G系列圓柱管螺紋圓板牙 - 英文版
GB/T 20328-2006
Circular dies for taper pipe threads - R series
R系列圓錐管螺紋圓板牙 - 英文版
GB/T 20666-2006
Unified screw threads - Tolerances
統一螺紋 公差 - 英文版
GB/T 20670-2006
Unified screw threads - General plan
統一螺紋 直徑與牙數系列 - 英文版
GB/T 20333-2006
Taps for parallel and taper pipe threads General dimensions and marking
圓柱和圓錐管螺紋絲錐的基本尺寸和標誌 - 英文版
GB/T 20669-2006
Unified screw threads - Profiles
統一螺紋 牙型 - 英文版

Find out:78Items   |  To Page of: First -Previous-Next -Last  | 1 2

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330        info@transcustoms.com 
©  Copyright 2001-2018  RJS MedTech Inc. All Rights Reserved