2005 year China issued GB standards list |
GB/T 19743-2005 Water atomized pure iron powder and alloyed steel powder for powder metallurgy
粉末冶金用水雾化纯铁粉、合金钢粉 |
||
GB/T 4351.3-2005 Portable Fire Extinguishers-Part3:Regulations
手提式灭火器 第3部分:检验细则 |
||
GB/T 19956.1-2005 Positive-displacement cacuum pumps-Measurement of performance characteristics Part1:Measurement of volume rate of flow(pumping speed)
容积真空泵性能测量方法 第1部分:体积流率(抽速)的测量 |
||
GB 19510.5-2005 Lamp controlgear--Part 5:Particular requirements for d.c.supplied electronic ballasts for general lighting
灯的控制装置 第5部分:普通照明用直流电子镇流器的特殊要求 |
||
GB/T 14598.17-2005 Electrical relay-Part 22-6:Electrical disturbance tests for measuring relays and protection equipment-Immunity to conducted disturbances induced by radio frequency fields
电气继电器 第22-6部分:量度继电器和保护装置的电气骚扰试验-射频场感应的传导骚扰的抗扰度 |
||
GB 19854-2005 General rules of explosion-proof techniques of industrial trucks for explosive atmospheres
爆炸性环境用工业车辆防爆技术通则 |
||
GB/T 19950-2005 The safety constructional requirements for double deck large passenger vehicles
双层客车结构安全要求 |
||
GB/T 19889.3-2005 Acoustics-Measurement of sound insulation in buildings and of building elements-Part 3:Laboratory measurements of airborne sound insulation of building elements
声学 建筑和建筑构件隔声测量 第3部分:建筑构件空气声隔声的实验室测量 |
||
GB/T 2423.54-2005 Environmental testing for electric and electronic products-Part 2:Test Methods-Test Xc:Fluid contamination
电工电子产品环境试验 第2部分:试验方法 试验Xc:流体污染 |
||
GB 15558.2-2005 Buried Polyethylene(PE)piping systems for the supply of gaseous fuels Part 2:Fittings
燃气用埋地聚乙烯(PE)管道系统 第2部分:管件 |
||
GB/T 1457-2005 Test method for climbing drum peel strength of sandwich constructions
夹层结构滚筒剥离强度试验方法 |
||
GB/T 5170.17-2005 Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined sequential cold low air pressure And damp heat testing equipments
电工电子产品环境试验设备 基本参数检定方法 低温/低气压/湿热综合顺序试验设备 |
||
GB/T 8014.2-2005 Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part2:Mass-loss method
铝及铝合金阳极氧化 氧化膜厚度的测量方法 第2部分:质量损失法 |
||
GB 10395.12-2005 Tractors and machinery for agriculture and forestry -- Technical means for ensuring safety -- Part 12: Portable powered hedge-trimmers
农林拖拉机和机械 安全技术要求 第12部分:便携式动力绿篱修剪机 |
||
GB/T 10561-2005 Steel-Determination of content of nonmetallic inclusions-Micrographic method using standards diagrams
钢中非金属夹杂物含量的测定--标准评级图显微检验法 |
||
GB/T 19727-2005 Forestry machinery-Backpack power units for brush-cutters,grass-trimmers,pole-cutters and similar appliances-Safety requirements and testing
林业机械 割灌机、割草机、杆式修枝锯和类似机具的背负式动力装置 安全要求和试验 |
||
GB 17957-2005 Rock drilling machines and pneumatic tools-Safety requirements
凿岩机械与气动工具 安全要求 |
||
GB 50354-2005 Code for fire prevention installation and acceptance in construction of interior decoration engineering of buildings
建筑内部装修防火施工及验收规范 |
||
GB/T 6002.13-2005 Textile machinery Terminology -- Part 13: Dyeing and finishing machinery -- Tentering and heat-treatment machinery
纺织机械术语 第13部分:染整机械 拉幅定形机 |
||
GB/T 19772-2005 The reuse of urban recycling water Water quality standard for groundwater recharge
城市污水再生利用 地下水回灌水质 |
Find out:1107Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 |