Chinese National Standards -Taiwan
中華民國國家標準 -台灣
Home   CNS Standards Index   CNS Standards Search GB standards of P.R.China Contact Us
Keywords:  Broadcasting   Papermaking   shale   contraceptiv   filling   by-product   Paper   shaft   filing   jacket   pallet   container   file   audit   its   byproduct   packaing   alkali   fighting   Isotope 
 

CNS standards list

CNS Standard is abbreviation of Chinese National Standard, the National Standards of the Republic of China (Taiwan) ; They are administered by the Bureau of Standards, Metrology and Inspection of the Ministry of Economic Affairs. These standards are divided into 26 numbered categories. The English versions CNS standards were translated directly from the openly-published Chinese CNS standard , in case of any divergence of interpretation, the Chinese versions CNS standards text shall prevail.
       
CNS 12017 - English Version
Method of test for density, relative density (specific gravity), or API gravity of crude petroleum and liquid petroleum products (hydrometer
原油及液體石油產品密度、相對密度(比重)、API比重試驗1 - 英文版
CNS 7185 - English Version
Flag-form Hinges,Buffers and Flush Bolts for Steel Door
鋼製門用旗形鉸鏈、門止及天地閂 - 英文版
For Sale!
CNS 15562-10 - English Version
Stationary training equipment -- Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety
固定式訓練設備-第10部:具固定輪或無自由輪健身車-附 - 英文版
CNS 10020 - English Version
Methods of test for stress relaxation of rubber, vulcanized or thermoplastic
硫化橡膠或熱塑性橡膠應力鬆弛試驗法 - 英文版
CNS 8404 - English Version
Methods of Chemical Analysis for Silicon, Phosphorus, Sulphur, Ferrite, and Aluminum in Chromium Metal
金屬鉻中矽、磷、硫、鐵及鋁之化學分析法 - 英文版
CNS 15841 - English Version
Oil of lime expressed, Persian type (Citrus latifolia Tanaka)
萊姆油(壓榨法,波斯型) - 英文版
CNS 9621 - English Version
Rubber hoses for liquefied petroleum gases (LPGs) ? Automobile, general equipment and home application
液化石油氣用橡膠管(LPG橡膠管)-汽車、一般設備 - 英文版
For Sale!
CNS 15633 - English Version
Packaged dry, nonshrink hydraulic - cement grout
袋裝乾拌無收縮水硬性水泥灰漿 - 英文版
CNS 15798 - English Version
Oil of gum turpentine, Chinese (mainly from Pinus massoniana Lamb.)
中國脂松節油 - 英文版
CNS 13984 - English Version
Methods of test for thermal diffusivity, specific heat capacity, and
精密陶瓷依雷射閃光法之熱擴散率、比熱容量、熱傳導率 - 英文版
CNS 15845 - English Version
Oil of lavandin Grosso (Lavandula angustifolia Mill. x Lavandula latifolia Medik.), French type
葛羅索薰衣草油(法國型) - 英文版
CNS 3934 - English Version
Mechanical properties of bolts,screws and studs
螺栓、螺釘、螺樁之機械性質 - 英文版
CNS 15799 - English Version
Oil of magnolia flower, China type (Michelia x alba DC)
玉蘭花油(中國型) - 英文版
CNS 15632 - English Version
Packaged, dry, combined materials for mortar and concrete
袋裝乾拌水泥砂漿及混凝土 - 英文版
CNS 13575-1 - English Version
Wheelchairs - Nomenclature, terms and definitions
輪椅-專有名詞、術語及定義 - 英文版
CNS 15762-3 - English Version
Footwear - Test methods for uppers - Part 3: Colour fastness to rubbing of uppers, linings and insocks
鞋類-鞋面試驗法-第3部:鞋面、內裡及鞋墊之摩擦色牢 - 英文版
CNS 1015 - English Version
Picks, Two Conical Ends
十字鎬(兩端部為斜錐狀) - 英文版
CNS 307 - English Version
Metric Taps for Hole, Cylindrical Shank and Square Head
穿透絲公,方頭長圓柱柄,適於公制螺紋 - 英文版
For Sale!
CNS 255 - English Version
Adjustable Reamer, without Chamfer
光底活動鉸刀 - 英文版
CNS 252 - English Version
Adapter (Countersink Drill and Reamer, with Square Head)
插桿(沉鑽頭及鉸刀用,方頭圓柱柄) - 英文版
CNS 1014 - English Version
Picks, Illustration for Terms of Parts
十字鎬(各部份名稱) - 英文版
CNS 528 - English Version
Adjustable Plug Gauge for Whitworth Thread Ring Gauge (For Testing of Go and No Go Ring Gauge, Fine, Medium and Coarse
韋氏螺紋活動量規(檢驗通過及不通過端樣圈,精配,中 - 英文版
CNS 249 - English Version
Adjustable Machine Reamer, with Square Head
機用活動鉸刀(方頭圓柱柄) - 英文版
CNS 860 - English Version
Screws, Ring Headed
環頭螺釘 - 英文版
For Sale!
CNS 301 - English Version
Hand Tap, Whitworth
韋氏絲公,手用 - 英文版
CNS 306 - English Version
Whitworth Taps for Hole, Cylindrical Shank and Square Head
穿透絲公,方頭長圓柱柄,適於韋氏螺孔 - 英文版
For Sale!
CNS 323 - English Version
Hand Crank, Straight
直搖柄 - 英文版
CNS 314 - English Version
Guide Tap for Metric Thread, Machine Operated
導引絲公,機用,適於公制螺孔 - 英文版
For Sale!
CNS 257 - English Version
Boiler Rivet Hole Reamer, with Square Head
鍋爐鉚釘孔鉸刀(方頭圓柱柄) - 英文版
CNS 322 - English Version
Hand Crank, Curved
彎搖柄 - 英文版
CNS 313 - English Version
Guide Tap for Whitworth Thread, Machine Operated
導引絲公,機用,適於韋氏螺孔 - 英文版
For Sale!
CNS 302 - English Version
Hand Tap, Metric
公制絲公,手用 - 英文版
For Sale!
CNS 315 - English Version
Guide Tap for Whitworth Pipe Thread, Machine Operated
導引絲公,機用,適於韋氏管子螺孔 - 英文版
For Sale!
CNS 250 - English Version
Adjustable Machine Reamer Without Chamfer, with Square Head
光底活動鉸刀(機用,方頭圓柱柄) - 英文版
CNS 7107 - English Version
Needle Roller Bearings, Outer Races with Cage and Rollers
滾針軸承(無內環) - 英文版
CNS 7355 - English Version
Method of Test for Round Aluminium Wire for Electrical Wire, Solid
圓鋁單電線檢驗法 - 英文版
CNS 251 - English Version
Adapter (Countersink Drill and Reamer, with Morse Taper Shank)
插桿(沉鑽頭及鉸刀用,莫氏圓錐柄) - 英文版
CNS 10645 - English Version
Single-pick up, Blacksmiths' Tongs
鍛工用單葫蘆形夾鉗 - 英文版
CNS 539 - English Version
Adjustable Plug Gauge for Metric Thread (for Testing of Go and No Go Ring Gauge,Fine, Medium and Coarse Fits)
公制螺紋活動量規(檢驗通過端及不通過端樣圈,精配, - 英文版
CNS 130 - English Version
Morse Taper Gauge, Without Flat Head
莫氏圓錐量規(無扁頭) - 英文版
CNS 128 - English Version
Metric Taper Gauge, Without Flat Head
公制圓錐量規(無扁頭) - 英文版
CNS 127 - English Version
Metric Taper Gauge, with Flat Head
公制圓錐量規(有扁頭) - 英文版
CNS 6310 - English Version
Roller Bearings for Electric Traction, Selection of Fit for Shaft and Housings
電力牽引器用滾柱軸承軸及軸承殼配合公差選擇基準 - 英文版
CNS 66 - English Version
Square Heads and Holes (for Shaft, Hand Wheel and Handles)
方頭及方孔(用於軸,手輪及手柄) - 英文版
CNS 125 - English Version
Morse Taper for Tools 0-6, Metric Taper 80-200 (with Flat End)
工具圓錐(莫氏圓錐0-6及公制圓錐80-200)( - 英文版
CNS 233 - English Version
Counter sink Drill, with Whitworth Tapping Hole
沉鑽頭(韋氏圓柱頭螺絲孔) - 英文版
For Sale!
CNS 131 - English Version
Tail Spindle (Using Morse Taper 0-6 Metric Taper 4, 6, 80-120, Without Flat End)
頂針(用莫氏圓錐0-6公制圓錐4,6,80-120 - 英文版
CNS 147 - English Version
Cylindrical Shaft End (for Assembling Coupling, Pulley and Gear)
柱軸梢(用以承裝聯軸器,皮帶輪與齒輪) - 英文版
CNS 139 - English Version
Wrench, Socket-headed (Wrench Opening Ranging from 8 to 36 mm)
套筒扳手(口寬自8至36mm) - 英文版
For Sale!
CNS 8201 - English Version
Ductile Cast Iron Special Castings for Pressure Main Lines, Duckfoot Bends
壓力管路用延性鑄鐵管件-90°連座彎管 - 英文版
CNS 8200 - English Version
Ductile Cast Iron Special Castings for Pressure Main Lines, Double Flanged Taper
壓力管路用延性鑄鐵管件-雙凸緣漸縮管 - 英文版
CNS 235 - English Version
Tapping Countersink Drill, with Metric Tapping Hole
沉鑽頭(韋氏圓柱頭螺絲孔) - 英文版
For Sale!
CNS 851 - English Version
Ductile Cast Iron Special Castings for Main Lines,Double Flanged Bends 45 (DFB-45)
壓力管路用延性鑄鐵管件-45°雙凸緣彎管(DFB- - 英文版
CNS 837 - English Version
Ductile Cast Iron Special Castings for Pressure Main Lines, Flanged Spigots
壓力管路用延性鑄鐵管件-凸緣套管接頭 - 英文版
CNS 839 - English Version
Ductile Cast Iron Special Castings for Pressure Main Lines, Double- socket Bends 90°
壓力管路用延性鑄鐵管件-90°雙承口彎管 - 英文版
CNS 220 - English Version
Twist Drill, with Large Morse Taper Shank, 26mm
蔴花鑽頭(莫氏圓錐柄) - 英文版
For Sale!
CNS 141 - English Version
Wrench, S-handle (for Pipe Fitting)
彎柄雙頭扳手(用於管子) - 英文版
For Sale!
CNS 140 - English Version
Wrench, Socket-Headed (Wrench Opening Ranging from 41 to 145 mm)
套筒扳手(口寬自41至145mm) - 英文版
For Sale!
CNS 10642 - English Version
Straight Lip, Flat, Blacksmiths' Tongs
鍛工用直口扁平夾鉗 - 英文版
CNS 850 - English Version
Ductile Cast Iron Special Castings for Pressure Main Lines, Double Flanged Duckfoot Bends. (DFDB)
壓力管路用延性鑄鐵管件-90°雙凸緣連座彎管(DF - 英文版
CNS 716 - English Version
Gate Valve ,Flange Type (Nominal Pressure 16 kgf/cm )
截流活門(凸緣式)(標稱壓力16公斤/平方公分;最 - 英文版
CNS 10647 - English Version
Gad, Blacksmiths' Tongs
鍛工用尖鏨平口鉗 - 英文版
CNS 855 - English Version
Ductile Cast Iron Special Casting for Pressure Main Lines, Blank Flange
壓力管路用延性鑄鐵管件-管口蓋板 - 英文版
CNS 395 - English Version
Fillet Radius, Straight Chamfer and Ring Groove (for Bearing Sleeve)
圓角半徑、直倒角、環槽(用於軸承襯) - 英文版
CNS 493 - English Version
Fine Whitworth Thread (Diameter Ranging From 20 to 189 mm, with Tip Clearance)
韋氏細螺紋(尖端有空隙,直徑自20至189公釐) - 英文版
CNS 10646 - English Version
Double-Pick up, Blacksmiths' Tongs
鍛工用雙葫蘆形夾鉗 - 英文版
CNS 6307 - English Version
Roller Bearings for Electric Traction, Permissible Axial Displacement
電力牽引器用滾柱軸承內外環間之軸向變位允許量 - 英文版
CNS 849 - English Version
Ductile Cast Iron Special Castings for Pressure Main Lines, Flanged Bends (FB)
壓力管路用延性鑄鐵管件-90°雙凸緣彎管(FB) - 英文版
CNS 527 - English Version
Inspection Plug Gauge for Whitworth Thread Ring Gauge (Go End Limit for Fine, Medium and Coarse Fits)
韋氏螺紋樣圈之量柱及損磨量柱(通過端,精配,中配及 - 英文版
CNS 1019 - English Version
Picks (Single), One Taper End Only
單十字鎬(僅具單一斜錐狀端部) - 英文版
CNS 1020 - English Version
Picks (Single), One Dove-tail Shaped End Only
單十字鎬(僅具單一鴨嘴狀端部) - 英文版
CNS 7586 - English Version
Remote Control Gear with Transmission Tubing for Manual Operation; Protecting Hoods; for Crown Gear Units, Slewable
遙遠操作傳導桿管(可擺動之冠狀齒輪傳動機構之保護罩 - 英文版
CNS 217 - English Version
Tolerance of Counter - boring Twist Drill and Shell - type Counter - boring Twist Drill, with Morse Taper Shank
沉孔蔴花鑽頭及空心沉孔蔴花鑽頭之尺寸公差 - 英文版
CNS 1187 - English Version
Flat File for Carpenter, Wide Flat End
木工用闊平頭扁平銼 - 英文版
For Sale!
CNS 1188 - English Version
Flat File for Carpenter, Sharp Flat End
木工用尖平頭扁平銼 - 英文版
For Sale!
CNS 1189 - English Version
Half-round File for Carpenter, Wide Flat End
木工用闊平頭扁圓銼 - 英文版
For Sale!
CNS 1190 - English Version
Half-round File for Carpenter, Thin Sharp End
木工用細尖頭扁圓銼 - 英文版
For Sale!
CNS 1194 - English Version
Flat File for Smith, Wide Flat End
鐵工用闊平頭扁平銼 - 英文版
For Sale!
CNS 1195 - English Version
Flat File for Smith, Sharp Flat End
鐵工用尖平頭扁平銼 - 英文版
For Sale!
CNS 1210 - English Version
Mill Saw File, Thin Type
薄形磨鋸銼 - 英文版
CNS 3596 - English Version
Hand of Cut, Helix and Thread Direction for Angle Milling Cutter
角銑刀之刃向、角向及螺紋之方向 - 英文版
CNS 8100 - English Version
Deep Groove Full Type Thrust Ball Bearings; Single - Thrust, with Retaining Shield. (No Cage)
深溝止推全滿滾珠軸承(單向,連扣蓋) - 英文版
CNS 6308 - English Version
Roller Bearings for Electric Traction, Chamfers, Fillets and Shoulder Heights
電力牽引器用滾柱軸承去角、內圓角及肩高 - 英文版
CNS 8930 - English Version
Switchgears, Contact - Spring Washers
加強型彈簧墊圈(電器開關-接觸用) - 英文版
CNS 4243 - English Version
Radius under Head for Bolt, Screw
螺栓、螺釘之頭下內圓角半徑 - 英文版
CNS 4368 - English Version
Lifting hooks, knuckle threads
圓螺紋(起重機吊鈎用) - 英文版
CNS 9224 - English Version
Saw Blades for Woodworking, Technical Conditions of Delivery for Bandsaw Blades
木工帶鋸片總則 - 英文版
CNS 242 - English Version
Machine Reamer, with Morse Taper Shank
機用鉸刀(莫氏圓錐柄) - 英文版
CNS 245 - English Version
Adjustable Machine Reamer Without Chamfer, with Morse Taper Shank
光底活動鉸刀(機用,莫氏圓錐柄) - 英文版
CNS 523 - English Version
Plug Gauge for Whitworth Thread (Go End Limit for Fine, Medium and Coarse Fits)
韋氏螺紋量柱(通過端限界尺寸、精配、中配及粗配) - 英文版
CNS 524 - English Version
Plug Gauge for Whitworth Thread (No Go End Limit for Fine,Medium and Coarse Fits)
韋氏螺紋量柱(不通過端限界尺寸,精配,中配及粗配) - 英文版
CNS 538 - English Version
Inspection Plug Gauge for Metric Thread Ring Gauge (Go End Limit, Fine, Medium and Coarse Fits)
公制螺紋樣圈之量柱及磨損量柱(通過端,精配,中配及 - 英文版
CNS 248 - English Version
Insert-teeth Machine Reamer, with Square Head
機用鑲齒鉸刀(方頭圓柱柄) - 英文版
CNS 1397 - English Version
Alcohol, for Industrial Use
酒精(工業用) - 英文版
CNS 526 - English Version
Ring Gauge for Whitworth Thread (Go End Limit for Fine, Medium and Coarse Fits)
韋氏螺紋樣圈(通過端限界尺寸,精配,中配及粗配) - 英文版
CNS 4649 - English Version
Plain Washers, Hardened
硬化光墊圈 - 英文版
For Sale!
CNS 8922 - English Version
Driving Elements, Bushes for Plain Bearings
滑動軸承用軸襯(驅動元件) - 英文版
CNS 1018 - English Version
Picks (Single), One Taper End and One Hammershaped End
單十字鎬(一端為斜錐狀,一端為鎚狀) - 英文版
CNS 247 - English Version
Machine Reamer, with Square Head
機用鉸刀(方頭圓柱柄) - 英文版
CNS 1533 - English Version
Aluminum Chloride, Anhydrous
化學試藥(氯化鋁,無水) - 英文版

Find out:1307Items   |  To Page of: First -Previous-Next -Last  | [3] [4] [5] [6] [7] [8] [9]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330        info@gb-standards.com 
©  Copyright  2001-2018 All Rights Reserved