中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 8617.2-1988 调频广播编码器技术参数和测量方法 附加声道(中英文版) Technical parameters and measuring methods for FM broadcasting coder--Supplementary channel |
|||
GB/T 24814-2009 起重用短环链 吊链等用4级普通精度链(中英文版) Short link chain for lifting purposes - Grade 4,non-calibrated,for chain slings etc. |
|||
GB/T 2979-2017 农业轮胎规格、尺寸、气压与负荷(中英文版) Size designation, dimensions, inflation pressure and load capacity for agricultural tyres |
|||
GB/T 4296-2022 变形镁合金显微组织检验方法(中英文版) Inspection method for microstructure of wrought magnesium alloy |
|||
GB/T 3207-2008 银亮钢(中英文版) Bright steel |
|||
GB/T 35132.1-2017 自动化系统与集成 制造系统能源效率以及其他环境影响因素的评估 第1部分:概述和总则(中英文版) Automation systems and integration—Evaluating energy efficiency and other factors of manufacturing systems that influence the environment—Part 1:Overview and general principles |
|||
GB/T 50746-2012 石油化工循环水场设计规范(中英文版) Code for design of petrochemical recirculation cooling water unit |
|||
GB/T 4336-2002 碳素钢和中低合金钢 火花源原子发射光谱分析方法(常规法)(中英文版) Standard testmethod for spark discharge atomic emission--Spectrometric analysis of carbon and low-alloy steel(routine method) |
|||
GB/T 31838.7-2021 固体绝缘材料 介电和电阻特性 第7部分:电阻特性(DC方法) 高温下测量体积电阻和体积电阻率(中英文版) Solid insulating materials - Dielecteric and resistive properties - Part 7: Resistive properties(DC method) - Measurement of volume resistance and volume resistivity at elevated temperatures |
|||
GB/T 21166-2007 肠衣中硝基呋喃类代谢物残留量的测定 液相色谱-串联质谱法(中英文版) Determination of nitrofuran metabolites residues in casing - LC-MS-MS method |
|||
GB/T 15260-1994 镍基合金晶间腐蚀试验方法(中英文版) Nickel-based alloys--Determination of resistance to intergranular corrosion |
|||
GB/T 22838.5-2009 卷烟和滤棒物理性能的测定 第5部分:卷烟吸阻和滤棒压降(中英文版) Determination of physical characteristics for cigarettes and filter rods - Part 5: Cigarettes draw resistance and filter rods pressure drop |
|||
GB/T 32557.1-2016 带有法兰接触面的多棱锥接口 第1部分:柄部尺寸和标记(中英文版) Polygonal taper interface with flange contact surface—Part 1: Dimensions and designation of shanks |
|||
GB/T 4214.7-2020 家用和类似用途电器噪声测试方法 滚筒式干衣机的特殊要求(中英文版) Test method for noise of household and similar electrical appliances—Particular requirements for tumbler dryers |
|||
GB 30872-2014 建筑用丙烯酸喷漆铝合金型材(中英文版) Wrought aluminium alloy extruded profiles with acrylic coating for architecture |
|||
GB/T 18932.25-2005 蜂蜜中青霉素G、青霉素V、乙氧萘青霉素、苯唑青霉素、邻氯青霉素、双氯青霉素残留量的测定方法 液相色谱--串联质谱法(中英文版) Method for the determination of penicillin G,penicillin V,nafcillin,oxacillin,cloxacillin,dicloxacillin residues in honey-LC-MS-MS method |
|||
GB/T 3221-2010 柴油机动力内河船舶系泊和航行试验大纲(中英文版) Code for dock and sea trials of diesel-driven inland ships |
|||
GB/T 12009.5-2016 塑料 聚氨酯生产用芳香族异氰酸酯 第5部分:酸度的测定《第1号修改单》(中英文版) (Plastics - Aromatic isocyanates for the production of polyurethane - Part 5: Determination of acidity - amendment No. 1) |
|||
GB/T 22424-2008 通信用铅酸蓄电池的回收处理要求(中英文版) Technical requirements of recycling of lead acid battery for telecomunications |
|||
GB/T 20141-2018 型线同心绞架空导线(中英文版) Formed wire concentric lay overhead electrical stranded conductors |
|||
GB 29681-2013 食品安全国家标准 牛奶中左旋咪唑残留量的测定 高效液相色谱法(中英文版) National Food Safety Standard-Determination of Levamisole Residue in Milk by High Performance Liquid Chromatography |
|||
GB/T 19230.6-2003 评价汽油清净剂使用效果的试验方法 第6部分:汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台架试验方法(M111法)(中英文版) Test method for evaluating gasoline detergent in use--Part 6: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(M111 method) |
|||
GB/T 43416-2023 矫形鞋 要求与测试方法(中英文版) Orthopedic footwear Requirements and test methods |
|||
GB/T 11299.2-1989 卫星通信地球站无线电设备测量方法 第一部分:分系统和分系统组合通用的测量 第二节:射频范围内的测量(中英文版) Methods of measurement for radio equipment used in satellite earth stations--Part 1:Measurements common to sub-systems and combinations of sub-systems--Section two:Measurements in the r.f.range |
|||
GB/T 21729-2008 茶叶中硒含量的检测方法(中英文版) Tea - Determination of selenium content |
|||
GB 15842-1995 移动通信设备安全要求和试验方法(中英文版) Mobile radio equipment safety requirements and testing methods |
|||
GB/T 24973-2010 收费用电动栏杆(中英文版) Toll electric barrier |
|||
GB/T 24986.4-2017 家用和类似用途电器可靠性评价方法 第4部分: 房间空气调节器的特殊要求(中英文版) Evaluation methods for reliability on household and similar electrical appliances—Part 4:Particular requirements for room air conditioners |
|||
GB/T 42475-2023 化学品 中华蜜蜂急性经口毒性试验(中英文版) Chemicals Apis chinensis Acute Oral Toxicity Test |
|||
GB/T 11457-2006 信息技术 软件工程术语(中英文版) Information technology Software engineering terminology |
|||
GB/T 18490.1-2017 机械安全 激光加工机 第1部分:通用安全要求(中英文版) Safety of machinery—Laser processing machines—Part 1:General safety requirement |
|||
GB/T 2097-2012 模拟彩色电视广播测试图(中英文版) Test charts for analog colour television broadcasting |
|||
GB/T 40458-2021 用于病原微生物高通量检测的核酸提取技术规范(中英文版) Specification of nucleic acid extraction used for high-throughput detection of pathogenic microorganisms |
|||
GB/T 3690-2009 织物芯输送带 全厚度拉伸强度、拉断伸长率和参考力伸长率 试验方法(中英文版) Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method |
|||
GB/T 32953-2016 肥料中三聚氰胺含量的测定 离子色谱法(中英文版) Determination of melamine content for fertilizers—Ion chromatography(IC) method |
|||
GB/T 12519-2021 分析仪器通用技术条件(中英文版) General specification of analytical instruments |
|||
GB/T 31234-2014 YBZT系列隔爆型超高效率铸铜转子三相异步电动机(机座号80~200)技术条件(中英文版) Technical specification for YBZT series Flameproof premium efficiency three-phase induction motor with copper rotor(Frame size 80 t0 200) |
|||
GB/T 1819.7-2004 锡精矿化学分析方法 铋量的测定 火焰原子吸收光谱法(中英文版) Methods for chemical analysis of tin concentrates--Determination of bismuth content--Flame atomicabsorption spectrometric method |
|||
GB/T 22045-2008 地理标志产品 泸洲老窖特曲酒(中英文版) Product of geographical indication - Luzhou Laojiao Tequ liquor |
|||
GB 16197-1996 车间空气中木粉尘卫生标准(中英文版) Health standard for wood dust in the air of workplace |
|||
GB/T 5921-2015 汽车和挂车 气压制动系 部件上接口的识别标记(中英文版) Motor vehicles and towed vehicles—Air braking systems—Identification of connections on units |
|||
GB/T 50668-2011 节能建筑评价标准(中英文版) Standard for energy efficient building assessment |
|||
GB/T 5862-2020 农业拖拉机和机械 通用液压快换接头(中英文版) Agricultural tractors and machinery—General purpose quick-action hydraulic couplers |
|||
GB/T 5340.3-2006 可转位立铣刀 第3部分:技术条件(中英文版) End mill with indexable inserts - Part 3: Technical requirements |
|||
GB/T 6072.3-2008 往复式内燃机 性能 第3部分:试验测量(中英文版) Reciprocating internal combustion engines - Performance - Part 3: Test measurements |
|||
GB/T 37600.2-2018 全国主要产品分类-产品类别核心元数据-第2部分:锻件(中英文版) National central product classification—Product category core metadata—Part 2: Forgings |
|||
GB/T 16448-2013 烟草种子 品种命名原则(中英文版) Tobacco seed - Rule for naming of cultivar |
|||
GB/T 43571-2023 玩具材料中可迁移有机锡的测定 气相色谱-串联质谱法(中英文版) Determination of migrating organotins in toy materials Gas chromatography-tandem mass spectrometry |
|||
GB/T 20564.6-2010 汽车用高强度冷连轧钢板及钢带 第6部分:相变诱导塑性钢(中英文版) Continuously cold rolled high strength steel sheet and strip for automobile - Part 6: Transformation induced plasticity steel |
|||
GB/T 1452-2018 夹层结构平拉强度试验方法(中英文版) Test method for flatwise tension strength of sandwich constructions |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [871] [872] [873] [874] [875] [876] [877] |