网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

“Determination of cor ” 中國GB標準檢索結果

1. 已翻譯的GB標準英文版(有 SALE 標誌的),以及GB標準中文版,可以直接在網站上購買,在收到您付款後,會在1~3天內發您郵箱。
2. 其他未翻譯的GB標準英文版,在接到您翻譯訂單後,才進行翻譯,時間一般需要多3~5天。
       
GB/T 43184-2023
软木原料含水率测定方法(中英文版)
Method for determination of moisture content of cork raw materials
GB/T 43019.7-2023
塑料薄膜和薄片水蒸气透过率的测定 第7部分:钙腐蚀法(中英文版)
Determination of water vapor transmission rate of plastic films and sheets Part 7: Calcium corrosion method
GB/T 42924.4-2023
塑料 烟雾产生 燃烧流腐蚀性的测定 第4部分:使用锥形腐蚀计的动态分解法(中英文版)
Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 4: Dynamic decomposition method using a cone corrosion meter.
GB/T 42924.1-2023
塑料 烟雾产生 燃烧流腐蚀性的测定 第1部分:通用术语和应用(中英文版)
Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 1: General terminology and applications.
GB/T 5003-2023
日用陶瓷器釉面耐化学腐蚀性的测定方法(中英文版)
Method for determination of chemical corrosion resistance of glazed surfaces of household ceramics
GB/T 14321-2022
刚玉磨料中α-Al2O3相X射线定量测定方法(中英文版)
X-ray Quantitative Determination Method of α-Al2O3 Phase in Corundum Abrasive
GB/T 30310-2022
浸胶帘线、纱线和线绳附胶量测定的试验方法(中英文版)
Test method for determination of the amount of glue attached to dipped cords, yarns and cords
GB/T 41898-2022
食品金属容器内壁涂覆层耐蚀力和致密性的测定 电化学法(中英文版)
Determination of corrosion resistance and compactness of coatings on inner walls of food metal containers-electrochemical method
GB/T 6730.83-2022
铁矿石 灼烧减量的测定 吸湿水校正重量法(中英文版)
Iron ore - Determination of loss on ignition - Hygroscopic water corrected gravimetric method
GB/T 40426.3-2021
塑料制品 装饰性实体面材 第3部分:性能的测定 非板型实体面材(中英文版)
Plastics—Decorative solid surfacing materials—Part 3:Determination of properties—Non-sheet solid surfacing material
GB/T 40426.2-2021
塑料制品 装饰性实体面材 第2部分:性能的测定 板型实体面材(中英文版)
Plastics—Decorative solid surfacing materials—Part 2: Determination of properties—Sheet solid surfacing material
GB/T 40377-2021
金属和合金的腐蚀 交流腐蚀的测定 防护准则(中英文版)
Corrosion of metals and alloys—Determination of AC corrosion—Protection criteria
GB/T 40168-2021
瓦楞芯纸 实验室起楞后边压强度的测定(中英文版)
Corrugating medium—Determination of the edge crush resistance after laboratory fluting
GB/T 40145-2021
化妆品中地索奈德等十一种糖皮质激素的测定 液相色谱/串联质谱法(中英文版)
Determination of 11 glucocorticoids including desonide in cosmetics—Liquid chromatography-tandem mass spectrometry
GB/T 6546-2021
瓦楞纸板 边压强度的测定(中英文版)
Corrugated fibreboard—Determination of edgewise crush resistance
GB/T 41104.2-2021
实心和药芯软钎料丝? 规范和试验方法? 第2部分:钎剂含量的测定(中英文版)
Solder wire, solid and flux cored -- Specification and test methods -- Part 2: Determination of flux content
GB/T 40815.2-2021
电气和电子设备机械结构 符合英制系列和公制系列机柜的热管理 第2部分:强迫风冷的确定方法(中英文版)
Mechanical structures for electrical and electronic equipment—Thermal management for cabinets in accordance with inch and metric system—Part 2:Method for the determination of forced air cooling
GB/T 39534-2020
金属和合金的腐蚀 液体中不锈钢和镍基合金均匀腐蚀速率测定方法(中英文版)
Corrosion of metals and alloys—Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids
GB/T 39560.701-2020
电子电气产品中某些物质的测定 第7-1部分:六价铬 比色法测定金属上无色和有色防腐镀层中的六价铬[Cr(VI)](中英文版)
Determination of certain substances in electrical and electronic products—Part 7-1:Hexavalent chromium—Presence of hexavalent chromium [Cr(VI)] in colourless and coloured corrosion-protected coatings on metals by the colorimetric method
GB/T 37619-2019
金属和合金的腐蚀 高频电阻焊焊管沟槽腐蚀性能恒电位试验与评价方法(中英文版)
Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes
GB/T 17248.2-2018
声学-机器和设备发射的噪声-在一个反射面上方可忽略环境修正的近似自由场测定工作位置和其他指定位置的发射声压级(中英文版)
Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
GB/T 17248.3-2018
声学-机器和设备发射的噪声-采用近似环境修正测定工作位置和其他指定位置的发射声压级(中英文版)
Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
GB/T 17248.5-2018
声学-机器和设备发射的噪声-采用准确环境修正测定工作位置和其他指定位置的发射声压级(中英文版)
Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
GB/T 19292.1-2018
金属和合金的腐蚀 大气腐蚀性 第1部分:分类、测定和评估(中英文版)
Corrosion of metals and alloys—Corrosivity of atmospheres—Part 1: Classification, determination and estimation
GB/T 35053-2018
煤层气含量测定用密闭取心方法(中英文版)
Sealed coring method for determination of coalbed methane content
GB/T 19292.4-2018
金属和合金的腐蚀 大气腐蚀性 第4部分:用于评估腐蚀性的标准试样的腐蚀速率的测定(中英文版)
Corrosion of metals and alloys—Corrosivity of atmospheres—Part 4: Determination of corrosion rate of standard specimens for the evaluation of corrosivity
GB/T 36174-2018
金属和合金的腐蚀 固溶热处理铝合金的耐晶间腐蚀性的测定(中英文版)
Corrosion of metals and alloys—Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
GB/T 36485.1-2018
装可转位刀片的矩形柄刀杆 第1部分:概述、关联性和尺寸的确定(中英文版)
Tool holders with rectangular shank for indexable inserts—Part 1:General survey, correlation and determination of dimensions
GB/T 22319.11-2018
石英晶体元件参数的测量 第11部分:采用自动网络分析技术和误差校正确定负载谐振频率和有效负载电容的标准方法(中英文版)
Measurement of quartz crystal unit parameters—Part 11:Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction
GB/T 34550.1-2017
海水冷却水处理药剂性能评价方法 第1部分: 缓蚀性能的测定(中英文版)
Method for evaluation of cooling seawater treatment agents—Part 1: Determination of corrosion inhibition performance
GB/T 33514-2017
钢丝绳芯输送带 钢丝绳横向和垂直位移的测定(中英文版)
Steel cord conveyor belts—Determination of the lateral and vertical displacement of steel cords
GB/T 35172-2017
水泥窑用耐火材料抗生活垃圾预处理可燃物侵蚀性试验方法(中英文版)
Determination of corrosion resistance of refractories for cement kilns to CMSW
GB 31604.36-2016
食品安全国家标准 食品接触材料及制品 软木中杂酚油的测定(中英文版)
National Food Safety Standard-Food contact materials and products-Determination of creosote oil in cork
GB/T 33042-2016
木质地板饰面层中铅、镉、铬、汞重金属元素含量测定(中英文版)
Determination of lead, cadmium, chromium, mercury in the surface decorated layer of wooden floor
GB 5009.86-2016
食品安全国家标准 食品中抗坏血酸的测定(中英文版)
National Food Safety Standard-Determination of ascorbic acid in foods
GB/T 32613-2016
涂改类文具中氯代烃的测定 气相色谱法(中英文版)
Determination of chlorhydrocaobon contents in correction stationery—Gas chromatographic method
GB/T 32550-2016
金属和合金的腐蚀 恒电位控制下的临界点蚀温度测定(中英文版)
Corrosion of metals and alloys—Determination of the critical pitting temperature under potentiostatic control
GB/T 32508-2016
绝缘油中腐蚀性硫(二苄基二硫醚)定量检测方法(中英文版)
Quantitative determination of corrosive sulfur (dibenzyl disulfide , DBDS) in insulating liquids
GB 23200.33-2016
食品安全国家标准 食品中解草嗪、莎稗磷、二丙烯草胺等110种农药残留量的测定 气相色谱-质谱法(中英文版)
National food safety standards—Determination of Benoxacor, Anilofos, Allidochlor 110 pesticides residues in foods Gas chromatography-mass spectrometry
GB/T 9989.5-2015
搪瓷耐化学侵蚀的测定 第5部分:在封闭系统中耐化学侵蚀的测定(中英文版)
Vitreous and porcelain enamels—Determination of resistance to chemical corrosion—Part 5: Determination of resistance to chemical corrosion in closed systems
GB/T 9989.4-2015
搪瓷耐化学侵蚀的测定 第4部分:用圆柱形容器进行耐碱溶液侵蚀的测定(中英文版)
Vitreous and porcelain enamels—Determination of resistance to chemical corrosion—Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
GB/T 9989.3-2015
搪瓷耐化学侵蚀的测定 第3部分:用六角形容器进行耐碱溶液侵蚀的测定(中英文版)
Vitreous and porcelain enamels—Determination of resistance to chemical corrosion—Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
GB/T 9989.2-2015
搪瓷耐化学侵蚀的测定 第2部分:耐沸腾酸、沸腾中性液体及其蒸气化学侵蚀的测定(中英文版)
Vitreous and porcelain enamels—Determination of resistance to chemical corrosion—Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours
GB/T 9989.1-2015
搪瓷耐化学侵蚀的测定 第1部分:室温下耐酸侵蚀的测定(中英文版)
Vitreous and porcelain enamels—Determination of resistance to chemical corrosion—Part 1: Determination of resistance to chemical corrosion by acids at room temperature
GB/T 31588.1-2015
色漆和清漆 耐循环腐蚀环境的测定 第1部分:湿(盐雾)/干燥/湿气(中英文版)
Paints and varnishes—Determination of resistance to cyclic corrosion conditions—Part 1: Wet(salt fog)/dry/humidity
GB/T 31578-2015
粮油检验 粮食及制品中粗蛋白测定 杜马斯燃烧法(中英文版)
Inspection of grain and oils—Determination of crude protein content in grain and its products—Combustion method according to the Dumas principle
GB/T 16586-2014
硫化橡胶 与钢丝帘线粘合强度的测定(中英文版)
Rubber,vulcanized―Determination of adhesion to wire cord
GB/T 31295-2014
风电叶片用芯材 弯曲载荷和压缩载荷下高温尺寸稳定性的测定(中英文版)
The core to wind turbine blade―Determination of dimensional stability at elevated temperatures with flexural load and with compressive load
GB/T 18175-2014
水处理剂缓蚀性能的测定 旋转挂片法(中英文版)
Determination of corrosion inhibition performance of water treatment agents―Rotation specimen method
GB/T 7989-2013
搪玻璃釉 耐沸腾酸及其蒸气腐蚀性能的测定(中英文版)
Viterous and porcelain enamels―Determination of resistance to chemical corrosion by boiling acids and their vapours

找到:94條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1 2

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved