网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

“Test methods for eth ” 中國GB標準檢索結果

1. 已翻譯的GB標準英文版(有 SALE 標誌的),以及GB標準中文版,可以直接在網站上購買,在收到您付款後,會在1~3天內發您郵箱。
2. 其他未翻譯的GB標準英文版,在接到您翻譯訂單後,才進行翻譯,時間一般需要多3~5天。
       
GB/T 20405.3-2006
失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第3部分:筛分法对粒径分布的测定(中英文版)
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 3: Determination of particle size distribution by sieve fractionation
GB/T 20405.2-2006
失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第2部分:单体残留的测定(中英文版)
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 2: Determination of amount of residual monomers
GB/T 20405.1-2006
失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第1部分:PH值的测定(中英文版)
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 1: Determination of PH
GB/T 20142-2006
标称电压高于1000V的交流架空线路用线路柱式复合绝缘子-定义、试验方法及接收准则(中英文版)
Composite line post insulators for a.c. overhead lines with a norminal voltage greater than 1000V -- Definitions, Test methods and acceptance criteria
GB/T 10700-2006
精细陶瓷弹性模量试验方法 弯曲法(中英文版)
Test methods for elastic moduli of fine ceramics (advanced ceramics, advanced technical ceramics) - Bending method
GB/T 775.3-2006
绝缘子试验方法 第3部分:机械试验方法(中英文版)
Test method for insulators - Part 3: Mechanical test methods
GB/T 775.1-2006
绝缘子试验方法 第1部分:一般试验方法(中英文版)
Test method for insulators - Part 1: General test methods
GB/T 2423.55-2006
电工电子产品环境试验 第2部分: 环境测试 试验Eh:锤击试验(中英文版)
Environmental testing for electric and electronic products - Part 2: Test methods - Test Eh: Hammer tests
GB/T 20116.1-2006
燃料加热装置的试验方法 第1部分:通用部分(中英文版)
Test methods for fuel fired furnaces Part 1: General
GB/T 20114-2006
普通电源或整流电源供电直流电机的特殊试验方法(中英文版)
Specific test methods for d.c. machines on conventional and rectifier-fed supplies
GB/T 1410-2006
固体绝缘材料体积电阻率和表面电阻率试验方法(中英文版)
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
GB/T 10064-2006
测定固体绝缘材料绝缘电阻的试验方法(中英文版)
Methods of test for the determination of the insulation resistance of solid insulating materials
GB/T 3810.7-2006
陶瓷砖试验方法 第7部分:有釉砖表面耐磨性的测定(中英文版)
Test methods of ceramic tiles Part 7: Determination of resistance to surface abrasion for glazed tiles
GB/T 3810.6-2006
陶瓷砖试验方法 第6部分:无釉砖耐磨深度的测定(中英文版)
Test methods of ceramic tiles Part 6: Determination of resistance to deep abrasion for unglazed tiles
GB/T 3810.1-2006
陶瓷砖试验方法 第1部分:抽样和接收条件(中英文版)
Test methods of ceramic tiles Part 1: Sampling and basis for acceptance
GB/T 3810.11-2006
陶瓷砖试验方法 第11部分:有釉砖抗釉裂性的测定(中英文版)
Test methods of ceramic tiles Part 11: Determination of crazing resistance for glazed tiles
GB/T 8243.6-2006
内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验(中英文版)
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
GB/T 8243.5-2006
内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验(中英文版)
Methods of test for full-flow lubricating oil filters for internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test
GB/T 13448-2006
彩色涂层钢板及钢带试验方法(中英文版)
Test methods for Prepainted Steel Sheet
GB/T 7784-2006
机动往复泵试验方法(中英文版)
Test methods for power reciprocating pumps
GB/T?20170.1-2006
稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定(中英文版)
Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds
GB/T 19995.2-2005
天然材料体育场地使用要求及检验方法 第2部分: 综合体育场馆木地板场地(中英文版)
Virtue Requirements and Test Methods for Natural Material Sports Fileds -- Part 2:Wooden Floor For Multi-purposes Sport Fields
GB/T 19995.1-2005
天然材料体育场地使用要求及检验方法 第1部分:足球场地天然草面层(中英文版)
Virtue Requirements and Test Methods for Natural Material Sports Fileds -- Part 1:Natural turf for Football Courts
GB/T 14233.2-2005
医用输液、输血、注射器具检验方法 第2部分:生物学试验方法(中英文版)
Infusion,transfusion,injection equipment for medical use -- Part 2: Biological test methods
GB/T 19973.2-2005
医用器材的灭菌 微生物学方法 第二部分:确认灭菌过程的无菌试验(中英文版)
Sterilization of medical devices -- Microbiological methods -- Part 2: Test of sterility performed in the validation of a sterilization process
GB/T 20033.2-2005
人工材料体育场地使用要求及检验方法 第2部分:网球场地(中英文版)
Technical Requirements and Test Methods for Artificilal Material Sport Fileds -- Part 2: Tennis Courts
GB/T 5334-2005
乘用车车轮性能要求和试验方法(中英文版)
Performance requirments and test methods of passenger car wheels
GB/T 19951-2005
道路车辆-静电放电产生的电骚扰试验方法(中英文版)
Roadvehicles-Test methods for electrical disturbances from electrostatic discharge
GB/T 3903.9-2005
鞋类-内底试验方法-跟部持钉力(中英文版)
Footwear-Test methods for insoles-Heel pin holding strengh
GB/T 3903.8-2005
鞋类-内底试验方法-层间剥离强度(中英文版)
Footwear-Test methods for insoles-Delamination resistance
GB/T 5170.18-2005
电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备(中英文版)
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments
GB/T 19922-2005
硅片局部平整度非接触式标准测试方法(中英文版)
Standard test methods for measuring site flatness on silicon wafers by noncontact scanning
GB/T 3903.14-2005
鞋类-外底试验方法-针撕破强度(中英文版)
Footwear-Test methods for outsoles-Needle tear strength
GB/T 3903.13-2005
鞋类-外底试验方法-尺寸稳定性(中英文版)
Footwear-Test methods for outsoles-Dimensional stability
GB/T 3903.12-2005
鞋类-外底试验方法-撕裂强度(中英文版)
Footwear-Test methods for outsoles-Tear strengh
GB/T 3903.11-2005
鞋类-内底、衬里和内垫试验方法-耐汗性(中英文版)
Footwear-Test methods for insoles,lining and insocks-perspiration resistance
GB/T 3903.10-2005
鞋类-内底试验方法-尺寸稳定性(中英文版)
Footwear-Test methods for insoles-Dimensional stability
GB/T 19816.7-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture
GB/T 19816.6-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter
GB/T 19816.5-2005
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定(中英文版)
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure
GB 16838-2005
消防电子产品 环境试验方法及严酷等级(中英文版)
Environmental test methods and severities for fire electronic products
GB/T 5170.20-2005
电工电子产品环境试验设备 基本参数检定方法 水试验设备(中英文版)
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Water testing equipments
GB/T 5170.19-2005
电工电子产品环境试验设备 基本参数检定方法 温度/振动(正弦)综合试验设备(中英文版)
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined temperature/vibration(Sinusoidal)testing equipments
GB/T 5170.17-2005
电工电子产品环境试验设备 基本参数检定方法 低温/低气压/湿热综合顺序试验设备(中英文版)
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products Combined sequential cold low air pressure And damp heat testing equipments
GB/T 2423.28-2005
电工电子产品环境试验 第2部分:试验方法 试验T:锡焊(中英文版)
Basic environmental testing procedures for electric and electronic products-Part2:Test methods-Test T:Soldering
GB/T 2423.27-2005
电工电子产品环境试验 第2部分:试验方法 试验Z/AMD:低温/低气压/湿热连续综合试验(中英文版)
Environmental testing for electric and electronic products-Part 2:Test Methods Test Z/AMD:Combined sequential cold,low air pressure and damp heat test
GB/T 10066.11-2005
电热装置的试验方法 第11部分:埋弧炉(中英文版)
Test methods for electroheat installations Part 11:Submerged-arc furnaces
GB/T 10066.10-2005
电热装置的试验方法 第10部分:直接电弧炉(中英文版)
Test methods for electroheat installtions Part 10:Direct arc furnaces
GB/T 7680-2005
液力变矩器 性能试验方法(中英文版)
Torque converters-Methods of performance tests
GB/T 10901-2005
离心机 性能测试方法(中英文版)
Methods of Performance testing for centrifuge

找到:1920條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [28] [29] [30] [31] [32] [33] [34]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved