“Determination of ess ” 中國GB標準檢索結果 |
 |
1. 已翻譯的GB標準英文版（有 SALE
標誌的），以及GB標準中文版，可以直接在網站上購買，在收到您付款後，會在1～3天內發您郵箱。 2. 其他未翻譯的GB標準英文版，在接到您翻譯訂單後，才進行翻譯，時間一般需要多3～5天。 |
|
GB/T 22838.13-2009 卷烟和滤棒物理性能的测定 第13部分：滤棒圆度（中英文版） Determination of physical characteristics for cigarettes and filter rods - Part 13: Filter rods roundness |
 |
|
|
|
GB/T 14208.3-2009 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第3部分：压缩强度的测定（中英文版） Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving- reinforced resin - Part 3: Determination of compressive strength |
|
|
|
|
GB/T 18570.2-2009 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第2部分：清理过的表面上氯化物的实验室测定（中英文版） Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces |
|
|
|
|
GB/T 18570.11-2009 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分：水溶性硫酸盐的现场浊度测定法（中英文版） Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
|
|
|
|
GB/T 13288.5-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分：表面粗糙度的测定方法 复制带法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile |
|
|
|
|
GB/T 13288.3-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su |
|
|
|
|
GB/T 1943-2009 木材横纹抗压弹性模量测定方法（中英文版） Method for determination of the modulus of elasticity in compression perpendicular to grain of wood |
|
|
|
|
GB/T 18029.3-2008 轮椅车 第3部分：制动器的测定（中英文版） Wheelchairs - Part 3: Determination of effectiveness of brakes |
|
|
|
|
GB/T 13025.2-2008 制盐工业通用试验方法 白度的测定（中英文版） General test method in salt industry - Determination of whiteness |
|
|
|
|
GB/T 23144-2008 纸和纸板 静态弯曲挺度的测定 通用原理（中英文版） Paper and board - Determination of bending stiffness by static methods - General principle |
|
|
|
|
GB/T 22889-2008 皮革 物理和机械试验 表面涂层厚度的测定（中英文版） Leather - Physical and mechanical tests - Determination of surface coating thickness |
|
|
|
|
GB/T 22881-2008 纸和纸板 粗糙度（平滑度）的测定（空气泄漏法） 通用方法（中英文版） Paper and board - Determination of roughness/smoothness(air leak methods) - General method |
|
|
|
|
GB/T 22880-2008 纸和纸板 CIE白度的测定，D65/10°(室外日光)（中英文版） Paper and board - Determination of CIE whiteness, D65/10°(outdoor daylight) |
|
|
|
|
GB/T 22879-2008 纸和纸板 CIE白度的测定，C/2°(室内照明条件)（中英文版） Paper and board - Determination of CIE whiteness, C/2°( indoor illumination conditions) |
|
|
|
|
GB/T 22866-2008 皮革五金配件 镍释放量的测定（中英文版） Leather hardware accessory - Determination of release of nickel |
|
|
|
|
GB/T 22787-2008 烟花爆竹用冰晶石关键指标的测定（中英文版） Determination of essential parameters of cryolite for use in fireworks and firecrackers |
|
|
|
|
GB/T 22786-2008 烟花爆竹用高氯酸钾关键指标的测定（中英文版） Determination of essential parameters of potassium perchlorate for use in fireworks and firecrackers |
|
|
|
|
GB/T 22785-2008 烟花爆竹用铝粉关键指标的测定（中英文版） Determination of essential parameters of aluminum powder for use in fireworks and firecrackers |
|
|
|
|
GB/T 22784-2008 烟花爆竹用铝镁合金粉关键指标的测定（中英文版） Determination of essential parameters of aluminum-magnesium alloy powder for use in fireworks and firecrackers |
|
|
|
|
GB/T 22783-2008 烟花爆竹用硝酸钾关键指标的测定（中英文版） Determination of essential parameters of potassium nitrate for use in fireworks and firecrackers |
|
|
|
|
GB/T 22782-2008 烟花爆竹用氧化铜关键指标的测定（中英文版） Determination of essential parameters of cuprum oxide powder for use in fireworks and firecrackers |
|
|
|
|
GB/T 22781-2008 烟花爆竹用钛粉关键指标的测定（中英文版） Determination of essential parameters of titanium powder for use in fireworks and firecrackers |
|
|
|
|
GB/T 22638.3-2008 铝箔试验方法 第3部分：粘附性的测定（中英文版） Test methods for aluminium and aluminium alloy foils - Part 3: Determination of stickiness |
|
|
|
|
GB/T 22638.1-2008 铝箔试验方法 第1部分：厚度的测定 重量法（中英文版） Test methods for aluminium and aluminium alloy foils - Part 1: Determination of thickness by gravimetric method |
|
|
|
|
GB/T 22635-2008 门扇 湿度影响稳定性检测方法（中英文版） Door leaves - Determination of the behaviour under humidity variations in successive uniform climates |
|
|
|
|
GB/T 7702.3-2008 煤质颗粒活性炭试验方法 强度的测定（中英文版） Test method for granular activated carbon from coal - Determination of hardness |
|
|
|
|
GB/T 5507-2008 粮油检验 粉类粗细度测定（中英文版） Inspection of grain and oils - Determination for fineness degree of flours |
|
|
|
|
GB/T 5502-2008 粮油检验 米类加工精度检验（中英文版） Inspection of grain and oils - Determination of processing degree of rice and other grain kernels |
|
|
|
|
GB/T 22500-2008 动植物油脂 紫外吸光度的测定（中英文版） Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction |
|
|
|
|
GB/T 22427.6-2008 淀粉白度测定（中英文版） Starch - Determination of whiteness |
|
|
|
|
GB/T 22427.5-2008 淀粉细度测定（中英文版） Starch - Determination of fineness |
|
|
|
|
GB/T 9338-2008 荧光增白剂 相对白度的测定 仪器法（中英文版） Fluorescent whitening agents - Determination of relative whiteness - Instrumental measurement |
|
|
|
|
GB/T 11170-2008 不锈钢 多元素含量的测定 火花放电原子发射光谱法（常规法）（中英文版） Stainless steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (Routine method) |
|
|
|
|
GB/T 14271-2008 毛绒净毛率试验方法 油压法（中英文版） Test method for the determination of scoured yield raw wool - Oil pressure method |
|
|
|
|
GB/T 6669-2008 软质泡沫聚合材料 压缩永久变形的测定（中英文版） Flexible cellular polymeric materials - Determination of compression set |
|
|
|
|
GB/T 22363-2008 纸和纸板粗糙度的测定(空气泄漏法） 本特生法和印刷表面法（中英文版） Paper and board - Determination of roughness (air leak methods) - Bendtsen method and print-surf method |
|
|
|
|
GB/T 12660-2008 纸浆 滤水性能的测定 “加拿大标准”游离度法（中英文版） Pulps - Determination of drainability -“Canadian Standard”freeness method |
|
|
|
|
GB/T 5470-2008 塑料 冲击法脆化温度的测定（中英文版） Plastics - Determination of the brittleness temperature by impact |
|
|
|
|
GB/T 10417-2008 碳化钨钢结硬质合金技术条件及其力学性能的测试方法（中英文版） Specifications for steel-bonded tungsten carbides and determination of its transverse rupture strength, impact toughness and hardness |
|
|
|
|
GB/T 3398.2-2008 塑料 硬度测定 第2部分：洛氏硬度（中英文版） Plastics - Determination of hardness - Part 2:Rockwell hardness |
|
|
|
|
GB/T 3398.1-2008 塑料 硬度测定 第1部分：球压痕法（中英文版） Plastics - Determination of hardness - Part 1: Ball indentation method |
|
|
|
|
GB/T 2411-2008 塑料和硬橡胶 使用硬度计测定压痕硬度（邵氏硬度）（中英文版） Plastics and ebonite - Determination of indentation hardness by means of a duronmeter(shore hardness) |
|
|
|
|
GB/T 12729.4-2008 香辛料和调味品 磨碎细度的测定(手筛法)（中英文版） Spices and condiments - Determination of degree of fineness of grinding - Hand sieving method |
|
|
|
|
GB/T 6882-2008 声学 声压法测定噪声源声功率级 消声室和半消声室精密法（中英文版） Acoustics - Determination of sound power levels of noise sources using pressure - Precision methods for anechoic and hemi-anechoic rooms |
|
|
|
|
GB/T 22159.3-2008 声学与振动 弹性元件振动 声传递特性实验室测量方法 第3部分：弹性支撑件平动动刚度的间接测量方法（中英文版） Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
|
|
|
|
GB/T 16538-2008 声学 声压法测定噪声源声功率级 现场比较法（中英文版） Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ |
|
|
|
|
GB/T 5258-2008 纤维增强塑料面内压缩性能试验方法（中英文版） Fiber-reinforced plastic composites - Determination of compressive properties in the in-plane direction |
|
|
|
|
GB/T 5072-2008 耐火材料 常温耐压强度试验方法（中英文版） Refractories - Determination of cold compressive strength |
|
|
|
|
GB/T 17260-2008 亚麻纤维细度的测定 气流法（中英文版） Determination of fineness of flax - Permeametric method |
|
|
|
|
GB/T 531.1-2008 硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分：邵氏硬度计法（邵尔硬度）（中英文版） Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1：Duromerer method （Shore hardness） |
|
| 找到:406條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 8 9 |
+86-755-2583-1330
