网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

“The test method of t ” 中國GB標準檢索結果

1. 已翻譯的GB標準英文版(有 SALE 標誌的),以及GB標準中文版,可以直接在網站上購買,在收到您付款後,會在1~3天內發您郵箱。
2. 其他未翻譯的GB標準英文版,在接到您翻譯訂單後,才進行翻譯,時間一般需要多3~5天。
       
GB/T 30103.3-2013
冷库热工性能试验方法 第3部分:围护结构热流量检测(中英文版)
Methods of testing for thermal performance on cold store―Part 3: Heat flux testing for envelope enclosure
GB/T 30103.2-2013
冷库热工性能试验方法 第2部分:风速检测(中英文版)
Methods of testing for thermal performance on cold store―Part 2: Air velocity testing
GB/T 30103.1-2013
冷库热工性能试验方法 第1部分:温度和湿度检测(中英文版)
Methods of testing for thermal performance on cold store―Part 1: Temperature and humidity testing
GB/T 4757-2013
煤粉(泥)实验室单元浮选试验方法(中英文版)
Methods for the batch flotation testing of fine coal
GB/T 30020-2013
玻璃缺陷检测方法 光弹扫描法(中英文版)
Test method for the defects of glass - Photoelastic scanning method
GB/T 15748-2013
船用金属材料电偶腐蚀试验方法(中英文版)
The method of galvanic corrosion test for metallic ship materials
GB/T 17657-2013
人造板及饰面人造板理化性能试验方法(中英文版)
Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels
GB/T 19277.2-2013
受控堆肥条件下材料最终需氧生物分解能力的测定 采用测定释放的二氧化碳的方法 第2部分: 用重量分析法测定实验室条件下二氧化碳的释放量(中英文版)
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
GB 17578-2013
客车上部结构强度要求及试验方法(中英文版)
Requirements and test methods of strength for the superstructure of bus
GB/T 16903.3-2013
标志用图形符号表示规则 第3部分:感知性测试方法(中英文版)
Rules for the presentation of graphical symbols for use on graphical signs - Part 3: Method for testing perceptibility
GB/T 16903.2-2013
标志用图形符号表示规则 第2部分:理解度测试方法(中英文版)
Rules for the presentation of graphical symbols for use on graphical signs - Part 2: Methods for testing comprehensibility
GB/T 29536-2013
金属管材成形极限图(FLD) 试验方法(中英文版)
Testing method for the forming limit diagram (FLD) of metal tube
GB/T 29174-2012
物质恒温稳定性的热分析试验方法(中英文版)
Thermal analysis test method for constant-temperature stability of materials
GB/T 29043-2012
建筑幕墙保温性能分级及检测方法(中英文版)
Graduation and test method for thermal insulating properties of curtain walls
GB/T 7196-2012
用液体萃取测定电气绝缘材料离子杂质的试验方法(中英文版)
Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
GB/T 29365-2012
塑木复合材料 人工气候老化试验方法(中英文版)
Wood-Plastic Composite (WPC) - Test methods of artificial weathering
GB/T 29313-2012
电气绝缘材料热传导性能试验方法(中英文版)
Test method for thermal transmission properties of electrical insulation materials
GB/T 29307-2012
电动汽车用驱动电机系统可靠性试验方法(中英文版)
The reliability test methods of drive motor system for electric vehicles
GB/T 29247-2012
工业自动化仪表通用试验方法(中英文版)
General methods for testing the performance of industrial process measurement and control instruments
GB/T 28896-2012
金属材料 焊接接头准静态断裂韧度测定的试验方法(中英文版)
Metallic Materials - Method of test for the determination of quasistatic fracture toughness of welds
GB/T 28860-2012
环氧粉末包封料胶化时间测定方法(中英文版)
Test method for the determination of get time of encapsulating material of powdered epoxy
GB/T 28638-2012
城镇供热管道保温结构散热损失测试与保温效果评定方法(中英文版)
Heat loss test for thermal insulation structure and evaluation methods for thermal insulation efficiency of district heating pipes
GB/T 9292-2012
表面活性剂 高温条件下分散染料染聚酯织物用匀染剂的移染性测试法(中英文版)
Surface active agents method of testing of the migration action of levelling agents for disperse dyes on dyeing polyester textiles under high temperature condition
GB/T 28289-2012
铝合金隔热型材复合性能试验方法(中英文版)
Test methods for composite performances of aluminium alloy thermal barrier profiles
GB/T 25749.7-2012
机械安全 空气传播的有害物质排放的评估 第7部分:测量污染物浓度参数的试验台法(中英文版)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Test bench method for the measurement of the pollutant concentration parameter
GB/T 25749.6-2012
机械安全 空气传播的有害物质排放的评估 第6部分:测量带导管出口的空气净化系统质量分离效率的试验台法(中英文版)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet
GB/T 25749.5-2012
机械安全 空气传播的有害物质排放的评估 第5部分:测量不带导管出口的空气净化系统质量分离效率的试验台法(中英文版)
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet
GB/T 27945.2-2011
热处理盐浴有害固体废物的管理 第2部分:浸出液检测方法(中英文版)
The management of hazardous solid wastes from heat treatment salts Part 2:Test method of extractives
GB/T 20485.31-2011
振动与冲击传感器的校准方法 第31部分:横向振动灵敏度测试(中英文版)
Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity
GB/T 18570.6-2011
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法(中英文版)
Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method
GB/T 27797.11-2011
纤维增强塑料 试验板制备方法 第11部分:BMC和其他长纤维模塑料注射模塑 小方片(中英文版)
Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates
GB/T 27797.10-2011
纤维增强塑料 试验板制备方法 第10部分:BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑(中英文版)
Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens
GB/T 27698.8-2011
热交换器及传热元件性能测试方法 第8部分:热交换器工业标定(中英文版)
Test method for the performance of heat exchangers and heat exchange element - Part 8: Determination of industrial locale for heat exchangers
GB/T 27698.7-2011
热交换器及传热元件性能测试方法 第7部分:空冷器噪声测定(中英文版)
Test method for the performance of heat exchangers and heat exchange element - Part 7: Measurement of noise from air-cooled heat exchangers
GB/T 27698.6-2011
热交换器及传热元件性能测试方法 第6部分:空冷器用翅片管(中英文版)
Test method for the performance of heat exchangers and heat exchange element - Part 6: Fing tube for air-cooled heat exchangers
GB/T 27698.5-2011
热交换器及传热元件性能测试方法 第5部分:管壳式热交换器用换热管(中英文版)
Test method for the performance of heat exchangers and heat exchange element - Part 5: Heat transfer tube for tubular heat exchangers
GB/T 27698.4-2011
热交换器及传热元件性能测试方法 第4部分:螺旋板式热交换器(中英文版)
Test method for the performance of heat exchangers and heat exchange element - Part 4: Spiral heat exchanger
GB/T 27698.3-2011
热交换器及传热元件性能测试方法 第3部分:板式热交换器(中英文版)
Test method for the performance of heat exchangers and heat exchange element - Part 3: Plate heat exchanger
GB/T 27698.2-2011
热交换器及传热元件性能测试方法 第2部分:管壳式热交换器(中英文版)
Test method for the performance of heat exchangers and heat exchange element - Part 2: Tubular heat exchanger
GB/T 27698.1-2011
热交换器及传热元件性能测试方法 第1部分:通用要求(中英文版)
Test method for the performance of heat exchangers and heat exchange element - Part 1: General requirements
GB/T 27762-2011
热重分析仪质量示值校准的试验方法(中英文版)
Standard test method for mass scale calibration of thermogravimetric analyzers
GB/T 27761-2011
热重分析仪失重和剩余量的试验方法(中英文版)
Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers
GB/T 27760-2011
利用Si(111)晶面原子台阶对原子力显微镜亚纳米高度测量进行校准的方法(中英文版)
Test method for calibrating the z-magnification of an atomic force microscope at subnanometer displacement levels using si (111) monatomic steps
GB/T 27749-2011
绝缘漆耐热性试验规程 电气强度法(中英文版)
Test procedure for thermal endurance of insulating varnishes - Electric strength method
GB/T 27903-2011
电梯层门耐火试验 完整性、隔热性和热通量测定法(中英文版)
Fire resistance test for lift landing doors - Methods of measuring integrity,thernal insulation and heat flux
GB/T 27587-2011
日用陶瓷耐微波加热测试方法(中英文版)
Test method for the resistance to microwave heating of domestic ceramicware
GB/T 26977-2011
太阳能空气集热器热性能试验方法(中英文版)
Test methods for the thermal performance of solar air collectors
GB/T 26919-2011
选煤厂 煤泥水自然沉降试验方法(中英文版)
Coal preparation plant - Methods for the natural falling testing of slurry
GB/T 10820-2011
生活锅炉热效率及热工试验方法(中英文版)
Thermal efficiency and test methods of boilers for daily life
GB/T 1346-2011
水泥标准稠度用水量、凝结时间、安定性检验方法(中英文版)
Test methods for water requirement of normal consistency, setting time and soundness of the portland cement

找到:573條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1 2 3 4 5 6 7 8 9 10 11 12

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved