“Determination of ast ” 中國GB標準檢索結果

1. 已翻譯的GB標準英文版（有 SALE 標誌的），以及GB標準中文版，可以直接在網站上購買，在收到您付款後，會在1～3天內發您郵箱。
2. 其他未翻譯的GB標準英文版，在接到您翻譯訂單後，才進行翻譯，時間一般需要多3～5天。


	GB/T 13454.2-2013 塑料粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第2部分：试样制备和性能测定（中英文版） Plastics - Melamine-formaldehyde powder moulding compounds（MF-PMCs）-Part 2: Preparation of test specimens and determination of properties
	GB/T 19277.2-2013 受控堆肥条件下材料最终需氧生物分解能力的测定采用测定释放的二氧化碳的方法第2部分: 用重量分析法测定实验室条件下二氧化碳的释放量（中英文版） Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
	GB/T 29616-2013 热塑性弹性体多环芳烃的测定气相色谱-质谱法（中英文版） Thermoplastic elastomer - Determination of polycyclic aromatic hydrocarbons - Gas chromatography-mass spectrometry
	GB/T 18423-2013 橡胶和塑料软管及非增强软管液体壁透性测定（中英文版） Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls
	GB/T 13288.4-2013 涂覆涂料前钢材表面处理喷射清理后的钢材表面粗糙度特性第4部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法触针法（中英文版） Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p
	GB/T 28891-2012 纤维增强塑料复合材料单向增强材料Ⅰ型层间断裂韧性GⅠC的测定（中英文版） Fibre-reinforced plastic composites - Determination of mode Ⅰinterlaminar fracture toughness GⅠC for unidirectionally reinforced materials
	GB/T 28607-2012 标准弹性体材料与发动机油的相容性试验（中英文版） Determination of compatibility between standard elastomeric materials and automotive engine oil
	GB/T 19089-2012 橡胶或塑料涂覆织物耐磨性的测定马丁代尔法（中英文版） Rubber-or plastics-coated fabrics - Determination of abrasion resistance - Martindale method
	GB/T 27978-2011 水泥生产原料中废渣用量的测定方法（中英文版） Determination of the waste content in the raw mix of cement
	GB/T 28188-2011 纺织品马尾衬布回弹性的测定环状挂重法（中英文版） Textiles - Determination of elasticity of horsetail hair interlining - Loop with hanging weight
	GB/T 19277.1-2011 受控堆肥条件下材料最终需氧生物分解能力的测定采用测定释放的二氧化碳的方法第1部分：通用方法（中英文版） Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method
	GB/T 1690-2010 硫化橡胶或热塑性橡胶耐液体试验方法（中英文版） Rubber,vulcanized or thermoplastic - Determination of the effect of liquids
	GB/T 26294-2010 铝电解用炭素材料冷捣糊中有效粘合剂含量、骨料含量及骨料粒度分布的测定喹啉萃取法（中英文版） Carbonaceous materials used in the production of aluminium - Cold-ramming paste - Determination of effective binder content and aggregate content by extraction with quinoline,and determination of aggregate size distribution
	GB/T 26293-2010 铝电解用炭素材料冷捣糊和中温糊未焙烧糊捣实性的测定（中英文版） Carbonaceous materials used in the production of aluminium - Cold and tepid ramming paste - Determination of rammability of unbaked paste
	GB/T 26253-2010 塑料薄膜和薄片水蒸气透过率的测定红外检测器法（中英文版） Determination of water vapour transmission rate for plastics-filmand sheeting - Infrared detection sensor method
	GB/T 25278-2010 塑料用毛细管和狭缝口模流变仪测定塑料的流动性（中英文版） Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
	GB/T 25277-2010 塑料均聚聚丙烯（PP-H）中酚类抗氧剂和芥酸酰胺爽滑剂的测定液相色谱法（中英文版） Plastics - Determination of phenolic antioxidants and erucamide slip additives in polypropylene homopolymer formulations - liquid chromatography (LC)
	GB/T 1632.3-2010 塑料使用毛细管黏度计测定聚合物稀溶液黏度第3部分：聚乙烯和聚丙烯（中英文版） Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - part3: Polyethylenes and polypropylenes
	GB/T 12008.7-2010 塑料聚醚多元醇第7部分：粘度的测定（中英文版） Plastics - Polyether polyols - Part 7：Determination of viscosity
	GB/T 12008.6-2010 塑料聚醚多元醇第6部分：不饱和度的测定（中英文版） Plastics - Polyether polyols - Part 6: Determination of degree of unsaturation
	GB/T 12008.5-2010 塑料聚醚多元醇第5部分：酸值的测定（中英文版） Plastics - Polyether polyols - Part 5：Determination of acidity as acid number
	GB/T 15597.2-2010 塑料聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料第2部分：试样制备和性能测定（中英文版） Plastics - Poly(methyl methacrylate)(PMMA)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
	GB/T 25224.2-2010 动植物油脂植物油中豆甾二烯的测定第2部分：高效液相色谱法（中英文版） Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 2: Method using high-performance liquid chromatography ( HPLC )
	GB/T 25213-2010 煤的塑性测定恒力矩吉氏塑性仪法（中英文版） Determination of plastic properties of coal - Constant-torque gieseler plastometer method
	GB/T 3402.2-2010 塑料氯乙烯均聚和共聚树脂第2部分：试样制备及性能测定（中英文版） Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties
	GB/T 12010.2-2010 塑料聚乙烯醇材料（PVAL）第2部分：性能测定（中英文版） Plastic - Poly(vinyl alcohol)(PVAL)materials - Part 2: Determination of properties
	GB/T 9345.5-2010 塑料灰分的测定第5部分：聚氯乙烯（中英文版） Plastics - Determination of ash - Part 5: Poly(vinyl chloride)
	GB/T 24852-2010 大米及米粉糊化特性测定快速粘度仪法（中英文版） Determination of the pasting properties of rice - Rapid visco analyzer method
	GB/T 24876-2010 畜禽养殖污水中七种阴离子的测定离子色谱法（中英文版） Determination of seven anions in waste water from livestock and poultry farm - Ion Chromatography
	GB/T 24793-2009 摄影加工废液银含量的测定（中英文版） Photography - Processing wastes - Determination of silver content
	GB/T 24792-2009 摄影加工废液氰化物分析用光谱法测定六氰合亚铁酸盐（Ⅱ）和六氰合铁酸盐（Ⅲ）（中英文版） Processing photographic wastes - Analysis of cyanides - Determination of hexacyanoferrate(Ⅱ) and hexacyanoferrate(Ⅲ) by spectrometry
	GB/T 24531-2009 高炉和直接还原用铁矿石转鼓和耐磨指数的测定（中英文版） Iron ores for blast furnace and direct reduction feedstocks - Determination of the tumble and abrasion indices
	GB/T 24530-2009 高炉用铁矿石荷重还原性的测定（中英文版） Iron ores for blast furnace feedstocks - Determination of reduction under load
	GB/T 24520-2009 铸铁和低合金钢镧、铈和镁含量的测定电感耦合等离子体原子发射光谱法（中英文版） Cast iron and low alloy steel - Determination of lanthanum, cerium and magnesium content - Inductively coupled plasma atomic emission spectrometric method
	GB/T 24515-2009 高炉用铁矿石用还原速率表示的还原性的测定（中英文版） Iron ores for blast furnace feedstocks - Determination of the reducibility by the rate of reduction index
	GB/T 24282-2009 塑料聚丙烯中二甲苯可溶物含量的测定（中英文版） Plastics - Determination of xylene-soluble matter in polypropylene
	GB/T 24234-2009 铸铁多元素含量的测定火花放电原子发射光谱法(常规法)（中英文版） Cast iron - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (Routine method)
	GB/T 24204-2009 高炉炉料用铁矿石低温还原粉化率的测定动态试验法（中英文版） Iron ores for blast furnace feedstocks - Determination of low-temperature reduction-disintegration indices by dynamic method
	GB/T 24191-2009 钢丝绳实际弹性模量测定方法（中英文版） Steel wire ropes - Determination of the actual modulus of elasticity
	GB/T 24189-2009 高炉用铁矿石用最终还原度指数表示的还原性的测定（中英文版） Iron ores for blast furnace feedstocks - Determination of the reducibility by the final degree of reduction index
	GB/T 4617-2009 塑料酚醛模塑制品丙酮可溶物的测定（中英文版） Plastics - Phenolic mouldings - Determination of acetone-soluble matter
	GB/T 24153-2009 橡胶及弹性体材料 N-亚硝基胺的测定（中英文版） Rubber and elastomer materials - Determination of N-nitrosamines
	GB/T 24148.6-2009 塑料不饱和聚酯树脂 (UP-R) 第6部分：130℃反应活性测定（中英文版） Plastics - Unsaturated-polyester resins - Part 6: Determination of reactivity at 130℃
	GB/T 24148.4-2009 塑料不饱和聚酯树脂(UP-R) 第4部分：粘度的测定（中英文版） Plastics - Unsaturated polyester resin - Part 4: Determination of viscosity
	GB/T 24148.2-2009 塑料不饱和聚酯树脂（UP-R）第2部分：试样制备和性能测定（中英文版） Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties
	GB/T 2406.2-2009 塑料用氧指数法测定燃烧行为第2部分：室温试验（中英文版） Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test
	GB/T 19466.6-2009 塑料差示扫描量热法（DSC）第6部分：氧化诱导时间(等温OIT)和氧化诱导温度（动态OIT）的测定（中英文版） Plastics - Differential scanning calorimetry（DSC）- Part 6: Determination of oxidation induction time（isothermal OIT）and oxidation induction temperature（dynamic OIT）
	GB/T 16578.2-2009 塑料薄膜和薄片耐撕裂性能的测定第2部分：埃莱门多夫（Elmendor）法（中英文版） Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method
	GB/T 14905-2009 橡胶和塑料软管各层间粘合强度的测定（中英文版） Rubber and plastics hoses - Determination of adhesion between components
	GB/T 12009.3-2009 塑料多亚甲基多苯基异氰酸酯第3部分：黏度的测定（中英文版） Plastics - Polymethylene polyphenyl isocyanate - Part 3: Determination of viscosity

找到:598條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [1] [2] [3] [4] [5] [6] [7]