“Determination of ste ” 中國GB標準檢索結果 |
![]() |
1. 已翻譯的GB標準英文版(有 SALE
標誌的),以及GB標準中文版,可以直接在網站上購買,在收到您付款後,會在1~3天內發您郵箱。 2. 其他未翻譯的GB標準英文版,在接到您翻譯訂單後,才進行翻譯,時間一般需要多3~5天。 |
![]() |
GB/T 223.84-2009 钢铁及合金 钛含量的测定 二安替比林甲烷分光光度法(中英文版) Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method |
![]() |
|
![]() |
GB/T 223.83-2009 钢铁及合金 高硫含量的测定 感应炉燃烧后红外吸收法(中英文版) Steel and iron - Determination of high sulfur content - Infrared absorption method after combustion in an induction furnace |
![]() |
|
![]() |
GB/T 11168-2009 光学系统像质测试方法(中英文版) Image quality of optical systems method of determination |
![]() |
|
![]() |
GB/T 10987-2009 光学系统 参数的测定(中英文版) Optical systems - Determination of parameters |
![]() |
|
![]() |
GB/T 24237-2009 直接还原炉料用铁矿球团 成团性的测定方法(中英文版) Iron ore pellets for shaft direct-reduction feedstocks - Determination of the clustering index |
![]() |
|
![]() |
GB/T 24191-2009 钢丝绳 实际弹性模量测定方法(中英文版) Steel wire ropes - Determination of the actual modulus of elasticity |
![]() |
|
![]() |
GB/T 24174-2009 钢 烘烤硬化值(BH2)的测定方法(中英文版) Steel - Determination of Bake-Hardening-Index (BH2) |
![]() |
|
![]() |
GB/T 24148.6-2009 塑料 不饱和聚酯树脂 (UP-R) 第6部分:130℃反应活性测定(中英文版) Plastics - Unsaturated-polyester resins - Part 6: Determination of reactivity at 130℃ |
![]() |
|
![]() |
GB/T 24148.4-2009 塑料 不饱和聚酯树脂(UP-R) 第4部分:粘度的测定(中英文版) Plastics - Unsaturated polyester resin - Part 4: Determination of viscosity |
![]() |
|
![]() |
GB/T 24148.2-2009 塑料 不饱和聚酯树脂(UP-R) 第2部分:试样制备和性能测定(中英文版) Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties |
![]() |
|
![]() |
GB/T 23901.2-2009 无损检测 射线照相底片像质 第2部分:阶梯孔型像质计 像质指数的测定(中英文版) Non-destructive testing - Image quality of radiographs - Part 2: Image quality indicators (step/hole type) - Determination of image quality value |
![]() |
|
![]() |
GB/T 23801-2009 中间馏分油中脂肪酸甲酯含量的测定 红外光谱法(中英文版) Determination of fatty acid methyl esters(FAME) in middle distillates by infrared spectroscopy method |
![]() |
|
![]() |
GB/T 12736-2009 输送带 机械接头强度的测定 静态试验方法(中英文版) Conveyor belts - Determination of strenght of mechanical fastenings - Static test method |
![]() |
|
![]() |
GB/T 23324-2009 纺织品 表面活性剂的测定 二硬脂基二甲基氯化铵(中英文版) Textiles - Determination of surfactant - Distearyl dimethyl ammonium chloride |
![]() |
|
![]() |
GB/T 18570.2-2009 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第2部分:清理过的表面上氯化物的实验室测定(中英文版) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces |
![]() |
|
![]() |
GB/T 18570.11-2009 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分:水溶性硫酸盐的现场浊度测定法(中英文版) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
![]() |
|
![]() |
GB/T 13288.5-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分:表面粗糙度的测定方法 复制带法(中英文版) Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile |
![]() |
|
![]() |
GB/T 13288.3-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法(中英文版) Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su |
![]() |
|
![]() |
GB/T 22730-2008 牙膏中三氯甲烷的测定 气相色谱法(中英文版) Determination of chloroform in toothpaste - Gas chromatography |
![]() |
|
![]() |
GB/T 22976-2008 牛奶和奶粉中α-群勃龙、β-群勃龙、19-乙烯去甲睾酮和epi-19-乙烯去甲睾酮残留量的测定 液相色谱-串联质谱法(中英文版) Determination of α-trenbolone, β-trenbolone, nortestosterone and epi-nortestosterone residues in milk and milk powder - LC-MS-MS method |
![]() |
|
![]() |
GB/T 23175-2008 纸浆 纤维长度的测定(光栅法)(中英文版) Pulp - Determination of fiber length (raster method) |
![]() |
|
![]() |
GB/T 22770-2008 印刷技术 用落棒式粘度计测定浆状油墨和连接料的流变性(中英文版) Graphic technology - Determination of rheological properties of paste inks and vehicles by the falling rod viscometer |
![]() |
|
![]() |
GB/T 22476-2008 中空玻璃稳态U值(传热系数)的计算及测定(中英文版) Calculation and determination of steady-state U values(thermal transmittance) of multiple glazing |
![]() |
|
![]() |
GB/T 22459.2-2008 耐火泥浆 第2部分:稠度试验方法(跳桌法)(中英文版) Refractory mortars - Part 2: Determination of consistency using the reciprocating flow table method |
![]() |
|
![]() |
GB/T 22459.1-2008 耐火泥浆 第1部分:稠度试验方法(锥入度法)(中英文版) Refractory mortars - Part 1: Determination of consistency using the penetrating cone method |
![]() |
|
![]() |
GB/T 22368-2008 低合金钢 多元素含量的测定 辉光放电原子发射光谱法(常规法)(中英文版) Low-alloy steel - Determination of multi-element contents - Glow discharge optical emission spectrometry(Routine method) |
![]() |
|
![]() |
GB/T 223.11-2008 钢铁及合金 铬含量的测定 可视滴定或电位滴定法(中英文版) Iron, steel and alloy - Determination of chromium content - Visual titration or potentiometric titration method |
![]() |
|
![]() |
GB/T 11170-2008 不锈钢 多元素含量的测定 火花放电原子发射光谱法(常规法)(中英文版) Stainless steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (Routine method) |
![]() |
|
![]() |
GB/T 9695.24-2008 肉与肉制品 胆固醇含量测定(中英文版) Meat and meat products - Determination of cholesterol |
![]() |
|
![]() |
GB/T 8806-2008 塑料管道系统 塑料部件尺寸的测定(中英文版) Plastics piping systems - Plastics components - Determination of dimensions |
![]() |
|
![]() |
GB/T 18252-2008 塑料管道系统 用外推法确定热塑性塑料材料以管材形式的长期静液压强度(中英文版) Plastics piping and ducting systems - Determination of the long - term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
![]() |
|
![]() |
GB/T 7731.9-2008 钨铁 铋含量的测定 碘化铋光度法和电感耦合等离子体原子发射光谱法(中英文版) Ferrotungsten - Determination of bismuth content - The bismuth iodide photometric method and inductively coupled plasma - atomic emission spectrometry |
![]() |
|
![]() |
GB/T 7731.8-2008 钨铁 锑含量的测定 罗丹明B光度法和电感耦合等离子体原子发射光谱法(中英文版) Ferrotungsten - Determination of antimony content - The tetraethylrhodamine photometrie method and inductively coupled plasma-atomic emission spectrometry |
![]() |
|
![]() |
GB/T 7731.6-2008 钨铁 砷含量的测定 钼蓝光度法和电感耦合等离子体原子发射光谱法(中英文版) Ferrotungsten - Determination of arsenic content - The molybdenum blue photometrie method and inductively coupled plasma-atomic emission spectrometry |
![]() |
|
![]() |
GB/T 223.59-2008 钢铁及合金 磷含量的测定 铋磷钼蓝分光光度法和锑磷钼蓝分光光度法(中英文版) Iron,steel and alloy - Determination of phosphorus content - Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method |
![]() |
|
![]() |
GB/T 223.5-2008 钢铁 酸溶硅和全硅含量的测定 还原型硅钼酸盐分光光度法(中英文版) Steel and iron - Determination of acid-soluble silicon and total silicon content - Reduced molybdosilicate spectrophotometric method |
![]() |
|
![]() |
GB/T 1632.5-2008 塑料 使用毛细管粘度计测定聚合物稀溶液粘度 第5部分:热塑性均聚和共聚型聚酯(TP)(中英文版) Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5 : Thermoplastic polyester(TP) homopolymers and copolymers |
![]() |
|
![]() |
GB/T 10417-2008 碳化钨钢结硬质合金技术条件及其力学性能的测试方法(中英文版) Specifications for steel-bonded tungsten carbides and determination of its transverse rupture strength, impact toughness and hardness |
![]() |
|
![]() |
GB/T 224-2008 钢的脱碳层深度测定法(中英文版) Determination of depth of decarburization of steels |
![]() |
|
![]() |
GB/T 2895-2008 塑料 聚酯树脂 部分酸值和总酸值的测定(中英文版) Plastics polyester resin - Determination of partial acid value and total acid value |
![]() |
|
![]() |
GB/T 22260-2008 饲料中甲基睾丸酮的测定 高效液相色谱串联质谱法(中英文版) Determination of methyltestosterone in feeds - High performance liquid chromatography tandem mass spectrometry |
![]() |
|
![]() |
GB/T 14455.7-2008 香料 乙酰化后酯值的测定和游离醇与总醇含量的评估(中英文版) Fragrance/Flavor substances - Determination of ester value after acetylation and evaluation of free alcohols and total alcohols content |
![]() |
|
![]() |
GB/T 14455.6-2008 香料 酯值或含酯量的测定(中英文版) Fragrance/Flavor substances - Determination of ester value or ester content |
![]() |
|
![]() |
GB/T 15928-2008 不饱和聚酯树脂基增强塑料中残留苯乙烯单体含量的测定(中英文版) Reinforced plastics based on unsaturated polyester resins - Determination of residual styrene monomer content |
![]() |
|
![]() |
GB/T 13475-2008 绝热 稳态传热性质的测定 标定和防护热箱法(中英文版) Thermal insulation - Determination of steady-state thermal transmission Properties - Calibrated and guard hot box |
![]() |
|
![]() |
GB/T 10296-2008 绝热层稳态传热性质的测定 圆管法(中英文版) Thermal insulation - Determination of steady-state thermal transmission properties-pipe insulation apparatus |
![]() |
|
![]() |
GB/T 10295-2008 绝热材料稳态热阻及有关特性的测定 热流计法(中英文版) Thermal insulation-Determination of steady-state thermal resistance and related properties - Heat flow meter apparatus |
![]() |
|
![]() |
GB/T 10294-2008 绝热材料稳态热阻及有关特性的测定 防护热板法(中英文版) Thermal insulation - Determination of steady-state thermal resistance and related properties - Guarded hot plate apparatus |
![]() |
|
![]() |
GB/T 1665-2008 增塑剂皂化值及酯含量的测定(中英文版) Plasticizers - Determination of saponification value and ester-content |
![]() |
|
![]() |
GB/T 6150.7-2008 钨精矿化学分析方法 钽铌量的测定 等离子体发射光谱法和分光光度法(中英文版) Methods for chemical analysis of tungsten concentrates - Determination of tantalum content and niobium content - Inductively coupled plasma emission spectrometry and spectrophotometry |
![]() |
找到:566條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [1] [2] [3] [4] [5] [6] [7] |