“Determination of ast ” 中國GB標準檢索結果

1. 已翻譯的GB標準英文版（有 SALE 標誌的），以及GB標準中文版，可以直接在網站上購買，在收到您付款後，會在1～3天內發您郵箱。
2. 其他未翻譯的GB標準英文版，在接到您翻譯訂單後，才進行翻譯，時間一般需要多3～5天。


	GB/T 12830-2008 硫化橡胶或热塑性橡胶与刚性板剪切模量和粘合强度的测定四板剪切法（中英文版） Rubber，vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple shear methods
	GB/T 21928-2008 食品塑料包装材料中邻苯二甲酸酯的测定（中英文版） Determination of phthalate esters in food plastic packaging materials
	GB/T 9348-2008 塑料聚氯乙烯树脂杂质与外来粒子数的测定（中英文版） Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles
	GB/T 2914-2008 塑料氯乙烯均聚和共聚树脂挥发物(包括水)的测定（中英文版） Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water)
	GB/T 1685-2008 硫化橡胶或热塑性橡胶在常温和高温下压缩应力松弛的测定（中英文版） Rubber，vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures
	GB/T 3074.2-2008 石墨电极弹性模量测定方法（中英文版） Method for the determination of the elastic modulus of graphite electrodes
	GB/T 21842-2008 牙膏中二甘醇的测定（中英文版） Determination of diethylene glycol in toothpaste
	GB/T 21529-2008 塑料薄膜和薄片水蒸气透过率的测定电解传感器法（中英文版） Determination of water vapour transmission rate for plastic film and sheeting - Electrolytic detection sensor method
	GB/T 18943-2008 多孔橡胶与塑料动态缓冲性能测定（中英文版） Cellular rubbers and plastics - Determination of dynamic cushioning performance
	GB/T 9871-2008 硫化橡胶或热塑性橡胶老化性能的测定拉伸应力松弛试验（中英文版） Rubber，vulcanized or thermoplastic-Determination of aging characteristics by measurement of stress relaxation
	GB/T 9867-2008 硫化橡胶或热塑性橡胶耐磨性能的测定（旋转辊筒式磨耗机法）（中英文版） Rubber, vulcanized or thermoplastic-Determination of abrasion resistance using a rotating cylindrical drum device
	GB/T 17473.7-2008 微电子技术用贵金属浆料测试方法可焊性、耐焊性测定（中英文版） Test methods of precious metals pastes used for microelectronics - Determination of solderability and solderelaching resistance
	GB/T 17473.6-2008 微电子技术用贵金属浆料测试方法分辨率测定（中英文版） Test methods of precious metal pastes used for microelectronics - Determination of resolution
	GB/T 17473.5-2008 微电子技术用贵金属浆料测试方法粘度测定（中英文版） Test methods of pastes used for microelectronics - Determination of viscosity
	GB/T 17473.4-2008 微电子技术用贵金属浆料测试方法附着力测定（中英文版） Test methods of precious metals pastes used for microelectronics - Determination of adhesion
	GB/T 17473.3-2008 微电子技术用贵金属浆料测试方法方阻测定（中英文版） Test methods of precious metals pastes used for microelectronics Determination of sheet resistance
	GB/T 17473.2-2008 微电子技术用贵金属浆料测试方法细度测定（中英文版） Test methods of presious metals pastes used for microelectronics - Determination of fineness
	GB/T 17473.1-2008 微电子技术用贵金属浆料测试方法固体含量测定（中英文版） Test methods of precious metals pastes used for microelectronics-Determination of solids content
	GB/T 21461.2-2008 塑料超高分子量聚乙烯(PE-UHMW)模塑和挤出材料第2部分: 试样制备和性能测定（中英文版） Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
	GB/T 21460.2-2008 塑料苯乙烯-丙烯腈(SAN)模塑和挤出材料第2部分: 试样制备和性能测定（中英文版） Plastics - Styrene/acrylonitrile(SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
	GB/T 8813-2008 硬质泡沫塑料压缩性能的测定（中英文版） Rigid cellular plastics - Determination of compression properties
	GB/T 21332-2008 硬质泡沫塑料水蒸气透过性能的测定（中英文版） Rigid cellular plastics - Determination of water vapour transmission properties
	GB/T 10799-2008 硬质泡沫塑料开孔和闭孔体积百分率的测定（中英文版） Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
	GB/T 8812.2-2007 硬质泡沫塑料弯曲性能的测定第2部分: 弯曲强度和表观弯曲弹性模量的测定（中英文版） Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
	GB/T 8812.1-2007 硬质泡沫塑料弯曲性能的测定第1部分：基本弯曲试验（中英文版） Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test
	GB/T 21300-2007 塑料管材和管件不透光性的测定（中英文版） Plastics pipes and fittings - Determination of opacity
	GB/T 1725-2007 色漆、清漆和塑料不挥发物含量的测定（中英文版） Paints,varnishes and plastics - Determination of non-volatile-matter content
	GB/T 5027-2007 金属材料薄板和薄带塑性应变比（r值）的测定（中英文版） Metallic materials - Sheet and strip - Determination of plastic strain ratio
	GB/T 21060-2007 塑料流动性的测定（中英文版） Plastics - Determination of pourability
	GB/T 21059-2007 塑料液态或乳液态或分散体系聚合物/树脂用旋转黏度计在规定剪切速率下黏度的测定（中英文版） Plastics - polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate
	GB/T 3510-2006 未硫化胶塑性的测定快速塑性计法（中英文版） Rubber，unvulcanized - Determination of plasticity - Rapid plastimeter method
	GB/T 13934-2006 硫化橡胶或热塑性橡胶屈挠龟裂和裂口增长的测定（德墨西亚型）（中英文版） Rubber，vulcanized or thermoplastic - Determination of flex cracking and crack growth(De Mattia)
	GB/T 12828-2006 生胶和未硫化混炼胶塑性值及复原值的测定平行板法（中英文版） Rubber，raw and unvalcanized compounded - Determination of plasticity number and recovery number - Parallel plate method
	GB/T 9870.1-2006 硫化橡胶或热塑性橡胶动态性能的测定第1部分：通则（中英文版） Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 1: General guidance
	GB/T 20673-2006 硬质泡沫塑料低于环境温度的线膨胀系数的测定（中英文版） Cellular plastics - Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures
	GB/T 20672-2006 硬质泡沫塑料在规定负荷和温度条件下压缩蠕变的测定（中英文版） Cellular plastics, rigid - Determination of compressive creep under specified load and temperature conditions
	GB/T 12812-2006 硬质泡沫塑料易碎性的测定（中英文版） Rigid cellular plastics - Determination of friability
	GB/T 12833-2006 橡胶和塑料撕裂强度和粘合强度测定中的多峰曲线分析（中英文版） Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
	GB/T 12829-2006 硫化橡胶或热塑性橡胶小试样（德尔夫特试样）撕裂强度的测定（中英文版） Rubber, vulcanized or thermoplastic - Determination of tear strength of small test pieces (Delft test pieces)
	GB/T 1040.4-2006 塑料拉伸性能的测定第4部分：各向同性和正交各向异性纤维增强复合材料的试验条件（中英文版） Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
	GB/T 1040.3-2006 塑料拉伸性能的测定第3部分：薄膜和薄片的试验条件（中英文版） Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
	GB/T 1040.2-2006 塑料拉伸性能的测定第2部分：模塑和挤塑塑料的试验条件（中英文版） Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
	GB/T 1040.1-2006 塑料拉伸性能的测定第1部分：总则（中英文版） Plastics - Determination of tensile properties - Part 1: General principles
	GB/T 20220-2006 塑料薄膜和薄片样品平均厚度，卷平均厚度及单位质量面积的测定称量法（称量厚度）（中英文版） Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
	GB/T 20417.2-2006 塑料丙烯腈-丁二烯-苯乙烯 (ABS) 模塑和挤出材料第2部分:试样制备和性能测定（中英文版） Plastics―Acrylonitrile-butadiene-styrene(ABS)moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties
	GB/T 1845.2-2006 塑料聚乙烯 (PE) 模塑和挤出材料第2部分: 试样制备和性能测定（中英文版） Plastics―Polyethylene(PE) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties
	GB/T 8810-2005 硬质泡沫塑料吸水率的测定（中英文版） Determination of water absorption of rigid cellular plastics
	GB/T 20026-2005 橡胶和塑料软管内衬层耐磨性测定（中英文版） Rubber and plastics hose -- Determination of abrasion of lining
	GB/T 20022-2005 塑料氯乙烯均聚和共聚树脂表观密度的测定（中英文版） Plastics -- Homopolymer and Copolymer resins of vinyl chloride Determination of apparent density
	GB/T 19816.7-2005 涂覆涂料前钢材表面处理喷射清理用金属磨料的试验方法第7部分:含水量的测定（中英文版） Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture

找到:598條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [4] [5] [6] [7] [8] [9] [10]