“Determination of 2,3” 中國GB標準檢索結果 |
1. 已翻譯的GB標準英文版(有 SALE
標誌的),以及GB標準中文版,可以直接在網站上購買,在收到您付款後,會在1~3天內發您郵箱。 2. 其他未翻譯的GB標準英文版,在接到您翻譯訂單後,才進行翻譯,時間一般需要多3~5天。 |
GB/T 39560.12-2024 电子电气产品中某些物质的测定-第12部分:气相色谱-质谱法同时测定聚合物中的多溴联苯、多溴二苯醚和邻苯二甲酸酯(中英文版) Determination of certain substances in electronic and electrical products-Part 12: Simultaneous determination of polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry |
|||
GB/T 6730.88-2024 铁矿石-氯含量的测定-X射线荧光光谱法(中英文版) Iron ore - Determination of chlorine content - X-ray fluorescence spectrometry |
|||
GB/T 6730.89-2024 铁矿石-钍含量的测定-偶氮胂Ⅲ分光光度法(中英文版) Iron ore-Determination of thorium content-Arsenazo III spectrophotometry |
|||
GB/T 13305-2024 不锈钢中α-相含量测定法(中英文版) Determination method of α-phase content in stainless steel |
|||
GB/T 10322.5-2024 铁矿石-交货批水分含量的测定(中英文版) Iron ore - Determination of moisture content in delivery batches |
|||
GB/T 6730.63-2024 铁矿石-铝、钙、镁、锰、磷、硅和钛含量的测定-电感耦合等离子体发射光谱法(中英文版) Iron ore - Determination of aluminum, calcium, magnesium, manganese, phosphorus, silicon and titanium content - Inductively coupled plasma emission spectrometry |
|||
GB/T 3654.10-2024 铌铁-铝含量的测定-EDTA滴定法(中英文版) Determination of ferroniobium-aluminum content-EDTA titration method |
|||
GB/T 34877.4-2024 工业风机-标准实验室条件下风机声功率级的测定-第4部分:声强法(中英文版) Industrial fans-Determination of sound power level of fans under standard laboratory conditions-Part 4: Sound intensity method |
|||
GB/T 3653.1-2024 硼铁-硼含量的测定-碱量滴定法-(中英文版) Determination of boron iron-boron content-alkali titration method- |
|||
GB/T 13748.20-2024 镁及镁合金化学分析方法-第20部分:元素含量的测定-电感耦合等离子体原子发射光谱法(中英文版) Chemical analysis methods for magnesium and magnesium alloys-Part 20: Determination of element content-Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 13930-2024 水环真空泵和水环压缩机-气量测定方法(中英文版) Water ring vacuum pumps and water ring compressors-Methods for determination of gas volume |
|||
GB/T 223.60-2024 钢铁及合金-硅含量的测定-重量法(中英文版) Steel and alloys - Determination of silicon content - Gravimetric method |
|||
GB/T 23561.11-2024 煤和岩石物理力学性质测定方法-第11部分:煤和岩石抗剪强度测定方法(中英文版) Methods for determination of physical and mechanical properties of coal and rock - Part 11: Determination of shear strength of coal and rock |
|||
GB/T 23561.1-2024 煤和岩石物理力学性质测定方法-第1部分:采样一般规定(中英文版) Methods for determination of physical and mechanical properties of coal and rock - Part 1: General provisions for sampling |
|||
GB/T 38216.5-2024 钢渣-氧化锰含量的测定-火焰原子吸收光谱法(中英文版) Steel slag - Determination of manganese oxide content - Flame atomic absorption spectrometry |
|||
GB/T 4103.18-2024 铅及铅合金化学分析方法-第18部分:银、铜、铋、砷、锑、锡、锌、铁、镉、镍、镁、铝、钙、硒和碲含量的测定-电感耦合等离子体质谱法(中英文版) Methods for chemical analysis of lead and lead alloys - Part 18: Determination of silver, copper, bismuth, arsenic, antimony, tin, zinc, iron, cadmium, nickel, magnesium, aluminum, calcium, selenium and tellurium content - Inductively coupled plasma mass spectrometry |
|||
GB/T 42513.6-2024 镍合金化学分析方法-第6部分:钼含量的测定-电感耦合等离子体原子发射光谱法(中英文版) Chemical analysis methods for nickel alloys-Part 6: Determination of molybdenum content-Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 42513.7-2024 镍合金化学分析方法-第7部分:钴、铬、铜、铁和锰含量的测定-火焰原子吸收光谱法(中英文版) Chemical analysis methods for nickel alloys-Part 7: Determination of cobalt, chromium, copper, iron and manganese content-Flame atomic absorption spectrometry |
|||
GB/T 43875-2024 水泥原材料中总铬的测定方法(中英文版) Determination method of total chromium in cement raw materials |
|||
GB/T 43876-2024 水泥净浆黏度测定方法(中英文版) Determination method of cement paste viscosity |
|||
GB/T 43877-2024 铁矿石-同化性能测定方法(中英文版) Iron ore - determination method of assimilation performance |
|||
GB/T 43883-2024 微束分析-分析电子显微术-金属中纳米颗粒数密度的测定方法(中英文版) Microbeam analysis - analytical electron microscopy - determination method of the number density of nanoparticles in metals |
|||
GB/T 43899-2024 生铁-多元素含量的测定-火花放电原子发射光谱法(常规法)(中英文版) Pig iron - Determination of multi-element content - Spark discharge atomic emission spectrometry (conventional method) |
|||
GB/T 43905.1-2024 焊接及相关工艺中烟尘和气体取样的实验室方法-第1部分:电弧焊中烟尘排放速率的测定和分析用烟尘的收集(中英文版) Laboratory methods for sampling fumes and gases for welding and related processes - Part 1: Determination of emission rates of fumes from arc welding and collection of fumes for analysis |
|||
GB/T 43905.2-2024 焊接及相关工艺中烟尘和气体取样的实验室方法-第2部分:电弧焊、切割及气刨中一氧化碳、二氧化碳、一氧化氮、二氧化氮排放速率的测定(中英文版) Laboratory methods for sampling fumes and gases for welding and related processes - Part 2: Determination of emission rates of carbon monoxide, carbon dioxide, nitric oxide and nitrogen dioxide during arc welding, cutting and gouging |
|||
GB/T 43905.3-2024 焊接及相关工艺中烟尘和气体取样的实验室方法-第3部分:电弧焊中臭氧排放速率的测定(中英文版) Laboratory methods for sampling fumes and gases for welding and related processes - Part 3: Determination of ozone emission rate during arc welding |
|||
GB/T 43905.6-2024 焊接及相关工艺中烟尘和气体取样的实验室方法-第6部分:电阻点焊中烟尘和气体的定量化测定(中英文版) Laboratory methods for sampling fumes and gases in welding and related processes - Part 6: Quantitative determination of fumes and gases in resistance spot welding |
|||
GB/T 43917.3-2024 焊接烟尘捕集和分离设备-第3部分:焊枪上烟尘吸气装置捕集效率的测定(中英文版) Welding fume capture and separation equipment-Part 3: Capture of fume suction devices on welding guns Determination of efficiency |
|||
GB/T 43917.4-2024 焊接烟尘捕集和分离设备-第4部分:捕集装置最小风量的测定(中英文版) Welding fume capture and separation equipment-Part 4: Determination of minimum air volume of capture device |
|||
GB/T 4701.13-2024 钛铁-硅、锰、磷、铬、铝、镁、铜、钒、镍含量的测定-电感耦合等离子体原子发射光谱法(中英文版) Ferrotitanium - Determination of silicon, manganese, phosphorus, chromium, aluminum, magnesium, copper, vanadium and nickel content - Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 6730.73-2024 铁矿石-全铁含量的测定-EDTA光度滴定法(中英文版) Iron Ore-Determination of Total Iron Content-ED TA photometric titration |
|||
GB/T 32718-2024 棉花纤维中脱叶剂残留量的测定(中英文版) Determination of Defoliant Residues in Cotton Fiber |
|||
GB/T 23561.8-2024 煤和岩石物理力学性质测定方法-第8部分:煤和岩石变形参数测定方法(中英文版) Methods for determination of physical and mechanical properties of coal and rock - Part 8: Methods for determination of deformation parameters of coal and rock |
|||
GB/T 2391-2024 反应染料-固色率的测定(中英文版) Reactive dyes-Determination of fixation rate |
|||
GB/T 43714-2024 饲料中泰拉霉素的测定-液相色谱-串联质谱法(中英文版) Determination of tulathromycin in feed - Liquid chromatography-tandem mass spectrometry |
|||
GB/T 38403.2-2024 皮革和毛皮-防霉剂的测定-第2部分:液相色谱法(人工汗液萃取)(中英文版) Leather and fur - Determination of mildew inhibitors - Part 2: Liquid chromatography (artificial sweat extraction) |
|||
GB/T 43818.1-2024 皮革-耐磨性能的测定-第1部分:泰伯尔法(中英文版) Leather - Determination of abrasion resistance - Part 1: Taber method |
|||
GB/T 33285.2-2024 皮革和毛皮-烷基酚及烷基酚聚氧乙烯醚的测定-第2部分:间接法(中英文版) Leather and fur - Determination of alkylphenols and alkylphenol polyoxyethylene ethers - Part 2: Indirect method |
|||
GB/T 43810-2024 饲料添加剂淫羊藿提取物中黄酮醇苷的测定-高效液相色谱法(中英文版) Determination of flavonol glycosides in epimedium extract, a feed additive-High performance liquid chromatography |
|||
GB/T 43603.3-2024 镍铂靶材合金化学分析方法-第3部分:碳含量的测定-高频红外检测法-(中英文版) Chemical analysis methods for nickel-platinum target alloys - Part 3: Determination of carbon content - high-frequency infrared detection method - |
|||
GB/T 43603.2-2024 镍铂靶材合金化学分析方法-第2部分:镁、铝、钛、钒、铬、锰、铁、钴、铜、锌、锆、银、钯、锡、钐、铅、硅含量的测定-电感耦合等离子体质谱法-(中英文版) Chemical analysis methods for nickel-platinum target alloys - Part 2: Determination of magnesium, aluminum, titanium, vanadium, chromium, manganese, iron, cobalt, copper, zinc, zirconium, silver, palladium, tin, samarium, lead, silicon content - inductively coupled plasma mass spectrometry - |
|||
GB/T 43753.4-2024 贵金属合金电镀废水化学分析方法-第4部分:氯离子含量的测定-氯化银浊度法(中英文版) Chemical analysis methods for precious metal alloy electroplating wastewater - Part 4: Determination of chloride ion content - silver chloride turbidity method |
|||
GB/T 43753.3-2024 贵金属合金电镀废水化学分析方法-第3部分:硫酸盐含量的测定-硫酸钡重量法(中英文版) Chemical analysis methods for precious metal alloy electroplating wastewater-Part 3: Sulfate content Determination of - barium sulfate gravimetric method |
|||
GB/T 43753.2-2024 贵金属合金电镀废水化学分析方法-第2部分:锌、锰、铬、镉、铅、铁、铝、镍、铜、铍含量的测定-电感耦合等离子体原子发射光谱法(中英文版) Chemical analysis methods for precious metal alloy electroplating wastewater-Part 2: Determination of zinc, manganese, chromium, cadmium, lead, iron, aluminum, nickel, copper and beryllium content-Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 43753.1-2024 贵金属合金电镀废水化学分析方法-第1部分:金、银、铂、钯、铱含量的测定-电感耦合等离子体原子发射光谱法(中英文版) Chemical analysis methods for precious metal alloy electroplating wastewater-Part 1: Determination of gold, silver, platinum, palladium and iridium content-Inductively coupled plasma atomic emission spectrometry |
|||
GB/T 43748-2024 微束分析-透射电子显微术-集成电路芯片中功能薄膜层厚度的测定方法(中英文版) Microbeam analysis-Transmission electron microscopy-Method for determination of thickness of functional thin film layers in integrated circuit chips |
|||
GB/T 43720-2024 皮革和毛皮-化学试验-阻燃剂的测定(中英文版) Leather and fur-Chemical tests-Determination of flame retardants |
|||
GB/T 43722.1-2024 皮革-抗菌性能的测定-第1部分:膜接触法(中英文版) Leather-Determination of antibacterial properties-Part 1: Membrane contact method |
|||
GB/T 43819-2024 皮革-化学试验-杀虫剂残留量的测定(中英文版) Leather-Chemical tests-Determination of pesticide residues |
|||
GB/T 43821-2024 纺织品-铅释放量的测定(中英文版) Textiles - Determination of antiviral activity |
找到:4250條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 |