“Determination of app” 中國GB標準檢索結果 |
 |
1. 已翻譯的GB標準英文版（有 SALE
標誌的），以及GB標準中文版，可以直接在網站上購買，在收到您付款後，會在1～3天內發您郵箱。 2. 其他未翻譯的GB標準英文版，在接到您翻譯訂單後，才進行翻譯，時間一般需要多3～5天。 |
|
GB/T 43610-2023 微束分析 分析电子显微术 线状晶体表观生长方向的透射电子显微术测定方法（中英文版） Microbeam analysis Analytical electron microscopy Transmission electron microscopy method for determination of apparent growth direction of linear crystals |
 |
|
|
|
GB/T 18950-2023 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定（中英文版） Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. |
|
|
|
|
GB/T 6609.25-2023 氧化铝化学分析方法和物理性能测定方法 第25部分：松装和振实密度的测定（中英文版） Methods for chemical analysis and determination of physical properties of alumina - Part 25: Determination of loose and tapped density |
|
|
|
|
GB/T 42924.1-2023 塑料 烟雾产生 燃烧流腐蚀性的测定 第1部分:通用术语和应用（中英文版） Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 1: General terminology and applications. |
|
|
|
|
GB/T 1094.101-2023 电力变压器 第101部分：声级测定 应用导则（中英文版） Power transformers - Part 101: Determination of sound levels - Application guidelines |
|
|
|
|
GB/T 12967.6-2022 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第6部分：色差和外观质量（中英文版） Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 6: Determination of color and appearance |
|
|
|
|
GB/T 19889.2-2022 声学 建筑和建筑构件隔声测量 第2部分：测量不确定度评定和应用（中英文版） Acoustics—Measurement of sound insulation in buildings and of building elements—Part 2 : Determination and application of measurement uncertainties |
|
|
|
|
GB/T 39693.8-2022 硫化橡胶或热塑性橡胶 硬度的测定 第8部分：赵氏硬度（P&J)法测定胶辊的表观硬度（中英文版） Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 8: Determination of apparent hardness of rubber rollers by Zhao's hardness (P&J) method |
|
|
|
|
GB/T 39693.7-2022 硫化橡胶或热塑性橡胶 硬度的测定 第7部分：邵氏硬度法测定胶辊的表观硬度（中英文版） Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 7: Determination of the apparent hardness of rubber rollers by the Shore hardness method |
|
|
|
|
GB/T 6538-2022 发动机油表观黏度的测定 冷启动模拟机法（中英文版） Determination of apparent viscosity of engine oil - Cold start simulator method |
|
|
|
|
GB/T 40380.2-2021 金属粉末 高温时松装密度和流速的测定 第2部分：高温时流速的测定（中英文版） Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures |
|
|
|
|
GB/T 40280-2021 塑料 液态或乳液态或分散体系的树脂 用单筒旋转黏度计测定表观黏度（中英文版） Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity using a single cylinder type rotational viscometer method |
|
|
|
|
GB/T 40380.1-2021 金属粉末 高温时松装密度和流速的测定 第1部分：高温时松装密度的测定（中英文版） Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures |
|
|
|
|
GB/T 39821-2021 塑料 不能从规定漏斗流出的模塑材料表观密度的测定（中英文版） Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel |
|
|
|
|
GB/T 39500-2020 皮革 物理和机械试验 视密度和单位面积质量的测定（中英文版） Leather—Physical and mechanical tests—Determination of apparent density and mass per unit area |
|
|
|
|
GB/T 24328.2-2020 卫生纸及其制品 第2部分: 厚度、层积厚度、表观层积紧度和松厚度的测定（中英文版） Tissue paper and tissue products—Part 2: Determination of thickness, bulking thickness and apparent bulk density and bulk |
|
|
|
|
GB/T 39693.6-2020 硫化橡胶或热塑性橡胶 硬度的测定 第6部分：IRHD法测定胶辊的表观硬度（中英文版） Rubber, vulcanized or thermoplastic—Determination of hardness—Part 6: Apparent hardness of rubber-covered rollers by IRHD method |
|
|
|
|
GB/Z 6113.403-2020 无线电骚扰和抗扰度测量设备和测量方法规范 第4-3部分：不确定度、统计学和限值建模 批量产品的EMC符合性确定的统计考虑（中英文版） Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-3: Uncertainties,statistics and limit modelling—Statistical considerations in the determination of EMC compliance of mass-produced products |
|
|
|
|
GB/T 39484-2020 纤维增强塑料复合材料 用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性（中英文版） Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach |
|
|
|
|
GB/T 3781.6-2019 乙炔炭黑 第6部分：视比容的测定（中英文版） Acetylene black—Part 6：Determination of apparent specific volume |
|
|
|
|
GB/T 1546-2018 纸浆-卡伯值的测定（中英文版） Pulp—Determination of Kappa number |
|
|
|
|
GB/T 17248.3-2018 声学-机器和设备发射的噪声-采用近似环境修正测定工作位置和其他指定位置的发射声压级（中英文版） Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
|
|
|
|
GB/T 17248.5-2018 声学-机器和设备发射的噪声-采用准确环境修正测定工作位置和其他指定位置的发射声压级（中英文版） Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
|
|
|
|
GB/T 1479.3-2017 金属粉末 松装密度的测定 第3部分：振动漏斗法（中英文版） Metallic powders－Determination of apparent density－Part 3: Oscillating funnel method |
|
|
|
|
GB/T 34180-2017 建筑用绝热制品 外墙外保温系统抗冲击性测定（中英文版） Thermal insulation products for building applications—Determination of the resistance to impact of external thermal insulation composite systems(ETICS) |
|
|
|
|
GB/T 34011-2017 建筑用绝热制品 外墙外保温系统抗拉脱性能的测定（泡沫块试验）（中英文版） Thermal insulation products for building applications—Determination of the pull-off resistance of external thermal insulation composite systems(ETICS)(foam block test) |
|
|
|
|
GB/T 13477.3-2017 建筑密封材料试验方法 第3部分：使用标准器具测定密封材料挤出性的方法（中英文版） Test method for building sealants—Part 3：Determination of extrudability of sealants using standardized apparatus |
|
|
|
|
GB/T 35160.1-2017 合成石材试验方法 第1部分：密度和吸水率的测定（中英文版） Test methods for agglomerated stone—Part 1：Determination of apparent density and water absorption |
|
|
|
|
GB/T 33002-2016 建筑用绝热制品 在规定压缩载荷和温度条件下变形的测定（中英文版） Thermal insulating products for building applications—Determination of deformation under specified compressive load and temperature conditions |
|
|
|
|
GB/T 33001-2016 建筑用绝热制品 弯曲性能的测定（中英文版） Thermal insulating products for building applications—Determination of bending behaviour |
|
|
|
|
GB/T 33011-2016 建筑用绝热制品 抗冻融性能的测定（中英文版） Thermal insulating products for building applications—Determination of freeze-thaw resistance |
|
|
|
|
GB/T 33157-2016 建筑用绝热制品 与面平行拉伸强度的测定（中英文版） Thermal insulating products for building applications—Determination of tensile strength parallel to faces |
|
|
|
|
GB/T 33158-2016 建筑用绝热制品 循环载荷性能的测定（中英文版） Thermal insulating products for building applications—Determination of behaviour under cyclic loading |
|
|
|
|
GB/T 32983-2016 建筑用绝热制品 压缩蠕变性能的测定（中英文版） Thermal insulating products for building applications—Determination of compressive creep |
|
|
|
|
GB/T 3810.3-2016 陶瓷砖试验方法 第3部分：吸水率、显气孔率、表观相对密度和容重的测定（中英文版） Test methods of ceramic tiles—Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density |
|
|
|
|
GB/T 9097-2016 烧结金属材料（不包括硬质合金） 表观硬度和显微硬度的测定（中英文版） Sintered metal materials，excluding hardmetals—Determination of apparent hardness and mincrohardness |
|
|
|
|
GB/T 32382-2015 建筑用绝热制品 剪切性能的测定（中英文版） Thermal insulating products for build applications—Determination of shear behaviour |
|
|
|
|
GB/T 32371.4-2015 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第4部分：挥发性二异氰酸酯的测定（中英文版） Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application—Part 4: Determination of volatile diisocyanates |
|
|
|
|
GB/T 32371.3-2015 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第3部分：挥发性醛类化合物的测定（中英文版） Short term method for measuring the emission prorerties of low-solvent or solvent-free adhesives after application—Part 3: Determination of volatile aldehydes |
|
|
|
|
GB/T 32371.2-2015 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第2部分：挥发性有机化合物的测定（中英文版） Short term method for measuring the emission prorerties of low-solvent or solvent-free adhesives after application—Part 2: Determination of volatile organic compound |
|
|
|
|
GB/T 31911-2015 燃气燃烧器具排放物测定方法（中英文版） Methods for determination of emissions from appliances burning gaseous fuels |
|
|
|
|
GB/T 21877-2015 染料及染料中间体 堆积密度的测定（中英文版） Dyestuffs and intermediate of dyes—Determination of tapping density |
|
|
|
|
GB/T 31057.1-2014 颗粒材料 物理性能测试 第1部分：松装密度的测量（中英文版） Granular materials―The physical properties―Part 1: Determination of apparent density |
|
|
|
|
GB/T 30807-2014 建筑用绝热制品 浸泡法测定长期吸水性（中英文版） Thermal insulating products for building applications―Determination of long-term water absorption by immersion |
|
|
|
|
GB/T 30806-2014 建筑用绝热制品 在指定温度湿度条件下尺寸稳定性的测试方法（中英文版） Thermal insulating products for building applications—Determination of dimensional stability under specified temperature and humidity conditions |
|
|
|
|
GB/T 30805-2014 建筑用绝热制品 部分浸入法测定短期吸水量（中英文版） Thermal insulating products for building applications—Determination of short term water absorption by partial immersion |
|
|
|
|
GB/T 30804-2014 建筑用绝热制品 垂直于表面抗拉强度的测定（中英文版） Thermal insulating products for building applications―Determination of tensile strength perpendicular to faces |
|
|
|
|
GB/T 30803-2014 建筑用绝热制品 绝热材料与粘结剂和基底涂层的拉伸粘结强度的测定（中英文版） Thermal insulation products for building applications—Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material |
|
|
|
|
GB/T 30802-2014 建筑用绝热制品 点载荷性能的测定（中英文版） Thermal insulating products for building applications—Determination of behaviour under point load |
|
|
|
|
GB/T 30749-2014 矿物药材及其煅制品视密度测定方法（中英文版） The apparent density determination of mineral medicine and calcined products |
|
| 找到:129條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 |
+86-755-2583-1330
