“Determination of ign” 中國GB標準檢索結果 |
1. 已翻譯的GB標準英文版(有 SALE
標誌的),以及GB標準中文版,可以直接在網站上購買,在收到您付款後,會在1~3天內發您郵箱。 2. 其他未翻譯的GB標準英文版,在接到您翻譯訂單後,才進行翻譯,時間一般需要多3~5天。 |
GB/T 22877-2023 纸、纸板、纸浆和纤维素纳米材料 灼烧残余物(灰分)的测定(525℃)(中英文版) Determination of ignition residue (ash) of paper, cardboard, pulp and cellulose nanomaterials (525°C) |
|||
GB/T 6150.1-2023 钨精矿化学分析方法 第1部分:三氧化钨含量的测定 钨酸铵灼烧重量法(中英文版) Methods for chemical analysis of tungsten concentrates Part 1: Determination of tungsten trioxide content Ammonium tungstate ignition gravimetric method |
|||
GB/T 41704-2022 锂离子电池正极材料检测方法 磁性异物含量和残余碱含量的测定(中英文版) Testing method for cathode material of lithium ion battery - Determination of magnetic foreign matter content and residual alkali content |
|||
GB/T 6730.83-2022 铁矿石 灼烧减量的测定 吸湿水校正重量法(中英文版) Iron ore - Determination of loss on ignition - Hygroscopic water corrected gravimetric method |
|||
GB/T 40302-2021 塑料 立式软薄试样与小火焰源接触的燃烧性能测定(中英文版) Plastics—Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source |
|||
GB/T 2481.2-2020 固结磨具用磨料 粒度组成的检测和标记 第2部分:微粉(中英文版) Bonded abrasives—Determination and designation of grain size distribution—Part 2:Microgrits |
|||
GB/T 5169.46-2020 电工电子产品着火危险试验 第46部分:试验火焰 非接触火焰源中起燃时特征热通量的测定(中英文版) Fire hazard testing for electric and electronic products—Part 46: Test flames—Determination of the characteristic heat flux for ignition from a non-contacting flame source |
|||
GB/T 5494-2019 粮油检验 粮食、油料的杂质、不完善粒检验(中英文版) Inspection of grain and oils—Determination of foreign matter and unsound kernels of grain and oilseeds |
|||
GB/T 742-2018 造纸原料、纸浆、纸和纸板-灼烧残余物(灰分)的测定(575℃和900℃)(中英文版) Fibrous raw material, pulp, paper and board—Determination of residue(ash) on ignition at 575℃ and 900℃ |
|||
GB/T 16430-2018 粉尘层最低着火温度测定方法(中英文版) Determination of the minimum ignition temperature of dust layer |
|||
GB/T 35986-2018 煤矸石烧失量的测定(中英文版) Determination of ignition loss in coal gangue |
|||
GB/T 35818-2018 林业生物质原料分析方法 多糖及木质素含量的测定(中英文版) Standard method for analysis of forestry biomass-Determination of structural polysaccharides and lignin |
|||
GB/T 34744-2017 规格材及齿板连接性能设计值确定方法(中英文版) Determination method of design values for dimension lumber and truss plate connection |
|||
GB/T 18511-2017 煤的着火温度测定方法(中英文版) Determination of ignition temperature of coal |
|||
GB/T 34231-2017 煤炭燃烧残余物烧失量测定方法(中英文版) Determination of loss on ignition for coal combustion residues |
|||
GB/T 34100-2017 轻质烃及发动机燃料和其他油品中总硫含量的测定 紫外荧光法(中英文版) Test method for determination of total sulfur in light hydrocarbons,spark ignition engine fuel ,diesel engine fuel, and engine oil—Ultraviolet fluorescence method |
|||
GB/T 5195.9-2016 萤石 灼烧减量的测定 重量法(中英文版) Fluorspar—Determination of loss on ignition—Gravimetric method |
|||
GB/T 33329-2016 颜料和体质颜料 灼烧损失和灼烧残余物的测定(中英文版) Pigments and extenders—Determination of ignition loss and residue on ignition |
|||
GB/T 12690.2-2015 稀土金属及其氧化物中非稀土杂质化学分析方法 第2部分:稀土氧化物中灼减量的测定 重量法(中英文版) Chemical analysis methods for non-rare earth impurity of rare earth metals and their oxides—Part 2: Determination of ignition loss content of rare earth oxides—Gravimetric method |
|||
GB/T 31470-2015 俄歇电子能谱与X射线光电子能谱测试中确定检测信号对应样品区域的通则(中英文版) Standard practice for determination of the specimen area contributing to the detected signal in Auger electron spectrometers and some X-ray photoelectron spectrometers |
|||
GB/T 14645-2014 纺织品 燃烧性能 45°方向损毁面积和接焰次数的测定(中英文版) Textiles―Burning behaviour―The 45°test determination of damaged area and ignition times |
|||
GB/T 3286.8-2014 石灰石及白云石化学分析方法 第8部分:灼烧减量的测定 重量法(中英文版) Method for chemical analysis of limestone and dolomite―Part 8: The determination of loss on ignition―The gravimetric method |
|||
GB/T 4324.16-2012 钨化学分析方法 第16部分:灼烧损失量的测定 重量法(中英文版) Methods for chemical analysis of tungsten - Part 16: Determination of loss content on ignition - Gravimetric method |
|||
GB/T 26019-2010 高杂质钨矿化学分析方法 三氧化钨量的测定 二次分离灼烧重量法(中英文版) Methods for chemical analysis of high impurity tungsten mineral - Determination of tungsten trioxide content - Twice separation and igniting gravimetric method |
|||
GB/T 6730.68-2009 铁矿石 灼烧减量的测定 重量法(中英文版) Iron ores - Determination of loss on ignition - Gravimetric method |
|||
GB/T 16484.18-2009 氯化稀土、碳酸轻稀土化学分析方法 第18部分:碳酸轻稀土中灼减量的测定 重量法(中英文版) Chemical analysis methods of rare earth chloride and light rare earth carbonate - Part 18: Determination of ignition loss content in light rare earth carbonate - Gravimetry |
|||
GB/T 23951-2009 无机化工产品中灼烧残渣测定通用方法(中英文版) Inorganic chemicals for industrial use - General method for the determination of residue after ignition |
|||
GB/T 2481.2-2009 固结磨具用磨料 粒度组成的检测和标记 第2部分:微粉(中英文版) Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits |
|||
GB/T 15033-2009 生咖啡 嗅觉和肉眼检验以及杂质和缺陷的测定(中英文版) Green coffee - Olfactory and visual examination and determination of foreign matter and defects |
|||
GB/T 8746-2009 纺织品 燃烧性能 垂直方向试样易点燃性的测定(中英文版) Textiles - Burning behaviour - Determination of ease of ignition of vertically oriented specimens |
|||
GB/T 23364.6-2009 高纯氧化铟化学分析方法 第6部分:灼减量的测定 称量法(中英文版) Methods for chemical analysis of high purity indium oxide - Part 6: Determination of the loss on ignition - Gravimetric analysis |
|||
GB/T 23362.6-2009 高纯氢氧化铟化学分析方法 第6部分:灼减量的测定 称量法(中英文版) Methods for chemical analysis of high purity indium hydroxide - Part 6: Determination of the loss on ignition - Gravimetric analysis |
|||
GB/T 23274.8-2009 二氧化锡化学分析方法 第8部分:灼烧失重的测定 重量法(中英文版) Methods for chemical analysis of stannic oxide - Part 8: Determination of loss on ignition - Gravimetric method |
|||
GB/T 22877-2008 纸、纸板和纸浆 灼烧残余物(灰分)的测定(525℃)(中英文版) Paper, board and pulps - Determination of residue(ash) on ignition at 525℃ |
|||
GB/T 5494-2008 粮油检验 粮食、油料的杂质、不完善粒检验(中英文版) Inspection of grain and oils - Determination of foreign matter and unsound kernels of grain and oilseeds |
|||
GB/T 10337-2008 造纸原料和纸浆中酸溶木素的测定(中英文版) Raw material and pulp - Determination of acid - soluble lignin |
|||
GB/T 9343-2008 塑料燃烧性能试验方法 闪燃温度和自燃温度的测定(中英文版) Test method for flammability of plastics - Determination of flash-ignition temperature and self-ignition temperature |
|||
GB/T 4610-2008 塑料 热空气炉法点着温度的测定(中英文版) Plastics - Determination of ignition temperature using a hot-air furnace |
|||
GB/T 7531-2008 有机化工产品灼烧残渣的测定(中英文版) Determination of ignition residue for organic chemical products |
|||
GB/T 21992-2008 糊用聚氯乙烯树脂 杂质与外来粒子数的测定(中英文版) Polyvinyl chloride resins for Paste - Determination of number of impurities particles and foreign particles |
|||
GB/T 9741-2008 化学试剂 灼烧残渣测定通用方法(中英文版) Chemical reagent - General method for the determination of residue after ignition |
|||
GB/T 9348-2008 塑料 聚氯乙烯树脂 杂质与外来粒子数的测定(中英文版) Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles |
|||
GB/T 21791-2008 石油产品自燃温度测定法(中英文版) Determination of ignition temperature of petroleum products |
|||
GB/T 6150.1-2008 钨精矿化学分析方法 三氧化钨量的测定 钨酸铵灼烧重量法(中英文版) Methods for chemical analysis of tungsten concentrates - Determination of tungsten trioxide content - The ammonium tungstate igniting gravimetric method |
|||
GB/T 7702.9-2008 煤质颗粒活性炭试验方法 着火点的测定(中英文版) Test method for granular activated carbon from coal - Determination of ignition temperature |
|||
GB/T 20805-2006 饲料中酸性洗涤木质素(ADL)的测定(中英文版) Determination of acid detergent lignin in feedstuffs |
|||
GB/T 20432.4-2006 摄影 照相级化学品 试验方法 第4部分: 灼烧残渣的测定(中英文版) Photography―Photographic-grade chemicals―Test methods―Part 4: Determination of residue after ignition |
|||
GB/T 19816.6-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter |
|||
GB/T 8094-2005 收获机械 联合收割机 粮箱容量及卸粮机构性能的测定(中英文版) Equipment for harvesting-Combine harvesters-Determination and designation of grain tank capacity and unloading device performance |
|||
GB/T 19723-2005 纺织纤维货批商业质量的测定(中英文版) Determination Commercial mass of Textiles-Fibres Consignments |
找到:65條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |