“Fibre-reinforced pla” 中國GB標準檢索結果

1. 已翻譯的GB標準英文版（有 SALE 標誌的），以及GB標準中文版，可以直接在網站上購買，在收到您付款後，會在1～3天內發您郵箱。
2. 其他未翻譯的GB標準英文版，在接到您翻譯訂單後，才進行翻譯，時間一般需要多3～5天。


	GB/T 40340-2021 复合材料与金属组合件碳纤维增强聚合物基复合材料胶接或紧固件连接结构人工环境下的电偶腐蚀试验盐雾试验（中英文版） Composites and metal assemblies—Galvanic corrosion tests of carbon fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres—Salt spray tests
	GB/T 39484-2020 纤维增强塑料复合材料用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性（中英文版） Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach
	GB/T 37897-2019 纤维增强塑料复合材料平板扭曲法测定面内剪切模量（中英文版） Fibre-reinforced plastic composites—Determination of the in-plane shear modulus by the plate twist method
	GB/T 36532-2018 纤维增强塑料热固性模塑料和预浸料固化特性测定（中英文版） Fibre-reinforced plastics—Thermosetting moulding compounds and prepregs—Determination of cure characteristics
	GB 51160-2016 纤维增强塑料设备和管道工程技术规范（中英文版） Technical code for fibre reinforced plastics equipment and piping engineering
	GB 51107-2015 纤维增强硅酸钙板工厂设计规范（中英文版） Code for design of fibre reinforced calcium silicate board plant
	GB/T 27797.4-2013 纤维增强塑料试验板制备方法第4部分：预浸料模塑（中英文版） Fibre-reinforced plastics - Methods of producing test plates - Part 4：Moulding of prepregs
	GB/T 29552-2013 纤维增强复合材料桥板（中英文版） Fibre reinforced plastics composites bridge decks
	GB/T 28891-2012 纤维增强塑料复合材料单向增强材料Ⅰ型层间断裂韧性GⅠC的测定（中英文版） Fibre-reinforced plastic composites - Determination of mode Ⅰinterlaminar fracture toughness GⅠC for unidirectionally reinforced materials
	GB/T 27797.9-2011 纤维增强塑料试验板制备方法第9部分：GMT/STC模塑（中英文版） Fibre-reinforced plastics - Methods of producing test plates - Part 9:Moulding of GMT/STC
	GB/T 27797.8-2011 纤维增强塑料试验板制备方法第8部分：SMC及BMC模塑（中英文版） Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC
	GB/T 27797.7-2011 纤维增强塑料试验板制备方法第7部分：树脂传递模塑（中英文版） Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding
	GB/T 27797.6-2011 纤维增强塑料试验板制备方法第6部分：拉挤模塑（中英文版） Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding
	GB/T 27797.5-2011 纤维增强塑料试验板制备方法第5部分：缠绕成型（中英文版） Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding
	GB/T 27797.3-2011 纤维增强塑料试验板制备方法第3部分：湿法模塑（中英文版） Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet compression moulding
	GB/T 27797.2-2011 纤维增强塑料试验板制备方法第2部分：接触和喷射模塑（中英文版） Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding
	GB/T 27797.1-2011 纤维增强塑料试验板制备方法第1部分：通则（中英文版） Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions
	GB/T 27797.11-2011 纤维增强塑料试验板制备方法第11部分：BMC和其他长纤维模塑料注射模塑小方片（中英文版） Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates
	GB/T 27797.10-2011 纤维增强塑料试验板制备方法第10部分：BMC和其他长纤维模塑料注射模塑一般原理和通用试样模塑（中英文版） Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens
	GB/T 3961-2009 纤维增强塑料术语（中英文版） Terms for fibre reinforced plastics
	GB/T 1040.5-2008 塑料拉伸性能的测定第5部分：单向纤维增强复合材料的试验条件（中英文版） Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
	GB/T 1040.4-2006 塑料拉伸性能的测定第4部分：各向同性和正交各向异性纤维增强复合材料的试验条件（中英文版） Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
	GB/T 1450.2-2005 纤维增强塑料冲压式剪切强度试验方法（中英文版） Fibre-reinforced plastic composites-Determination of the punch-type shear strength
	GB/T 1450.1-2005 纤维增强塑料层间剪切强度试验方法（中英文版） Fibre-reinforced plastic composites-Determination of interlaminar shear strength
	GB/T 1449-2005 纤维增强塑料弯曲性能试验方法（中英文版） Fibre-reinforced plastic composites-Determination of flexural properties
	GB/T 19467.2-2004 塑料可比单点数据的获得和表示第2部分:长纤维增强材料（中英文版） Plastics--Acquisition and presentation of comparable single-point data--Part 2:Long-fibre-reinforced plastics
	GB/T 1634.2-2004 塑料负荷变形温度的测定第2部分:塑料、硬橡胶和长纤维增强复合材料（中英文版） Plastics--Determination of temperature of deflection under load--Part 2:Plastics，ebonite and long-fibre-reinforced composites
	GB/T 5009.98-2003 食品容器及包装材料用不饱和聚酯树脂及其玻璃钢制品卫生标准的分析方法（中英文版） Method for analysis of hygienic standard of unsatur-ated polyester resin and glass fibre reinforced plastics used as food containers and packaging materials
	GB 13115-1991 食品容器及包装材料用不饱和聚酯树脂及其玻璃钢制品卫生标准（中英文版） Hygienic standard for unsaturated polyester resin and glass fibre reinforced plastics used asfood containers and packaging materials

找到:29條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1