网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 31364-2015
能量色散X射线荧光光谱仪主要性能测试方法(中英文版)
Test methods for main performance of energy dispersive X-ray fluorescence spectrometer
GB/T 22720.1-2017
旋转电机 电压型变频器供电的旋转电机无局部放电(Ⅰ型)电气绝缘结构的鉴别和质量控制试验(中英文版)
Rotating electrical machines—Qualification and quality control tests of partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters
GB 50352-2005
民用建筑设计通则(中英文版)
Code for design of civil buildings
GB/T 2317.4-2023
电力金具试验方法 第4部分:验收规则(中英文版)
Test methods for electrical fittings - Part 4: Rules for acceptance
GB/T 26823-2011
基于信用原则控制检出质量的零接收数计数抽样检验系统(中英文版)
Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
GB/T 33606-2017
额定电压6kV(Um=7.2kV)到35kV(Um=40.5kV)风力发电用耐扭曲软电缆(中英文版)
Flexible and torsion resistant cables of rated voltages from 6 kV(Um = 7.2 kV) up to 35 kV (Um = 40.5 kV) for wind power generation
GB/T 36148.3-2022
船舶与海上技术 海上环境保护 围油栏 第3部分:端部连接器(中英文版)
Ships and offshore technology - Protection of the offshore environment - Oil booms - Part 3: End connectors
GB/T 22906.3-2008
纸芯的测定 第3部分:水分含量的测定(烘箱干燥法)(中英文版)
Testing of cores - Part 3: Determination of moisture content using the oven drying method
GB/T 50262-2013
铁路工程基本术语标准(中英文版)
Standard for basic terms of railway engineering
GB 1886.279-2016
食品安全国家标准 食品添加剂 洋茉莉醛(又名胡椒醛)(中英文版)
National Food Safety Standard - Food Additives - Jasmine aldehyde (also known as piperonal)
GB/T 22712-2021
变频电机用G系列冷却风机技术规范(中英文版)
Technical specification for G series cooling fans applying to variable frequency motors
GB/T 21814-2008
工业废水的试验方法 鱼类急性毒性试验(中英文版)
Testing methods for industrial wastewater - Fish acute toxicity
GB/T 25444.5-2010
移动式和固定式近海设施 电气装置 第5部分:移动设施(中英文版)
Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units
GB/T 11598-1999
提供数据传输业务的公用网之间的分组交换信令系统(中英文版)
Packet-switched signalling system between public networks providing data transmission services
GB/T 14370-2015
预应力筋用锚具、夹具和连接器(中英文版)
Anchorage,grip and coupler for prestressing tendons
GB/T 39370-2020
皮革 物理和机械试验 表面反射性能的测定(中英文版)
Leather—Physical and mechanical tests—Determination of surface reflectance
GB 15209-2006
磁开关入侵探测器(中英文版)
Magnetic switch intrusion detectors
GB/T 19545.1-2012
单臂操作助行器具 要求和试验方法 第1部分:肘拐杖(中英文版)
Walking aids manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches
GB/T 37346-2019
不动产单元设定与代码编制规则(中英文版)
Regulation on real property unit formation and identifier coding
GB/T 43661-2024
表面化学分析-扫描探针显微术-用于二维掺杂物成像等用途的电扫描探针显微镜(ESPM,如SSRM和SCM)空间分辨的定义和校准(中英文版)
Surface chemical analysis - Scanning probe microscopy - Definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPM, such as SSRM and SCM) for two-dimensional imaging of dopants, etc.
GB/T 10156-2009
水准仪(中英文版)
Level
GB/T 36694-2018
土方机械 履带式推土机燃油消耗量 试验方法(中英文版)
Earth-moving machinery—Fuel consumption for tractor-dozer—Test methods
GB/T 23981.2-2023
色漆和清漆 遮盖力的测定 第2部分:黑白格板法(中英文版)
Paints and varnishes - Determination of hiding power - Part 2: Black and white grid method
GB/T 22119-2008
信用中介组织评价服务规范 信用评级机构(中英文版)
Evaluation service specification for credit agency organization - Credit rating agency
GB 28007-2011
儿童家具通用技术条件(中英文版)
Children’s furniture - General technical requirements
GB/T 18364.1-2001
汽车用液化石油气加气口(螺旋式)(中英文版)
Filling receptacle of LPG vehicle(Spird)
GB/T 23612-2017
铝合金建筑型材阳极氧化与阳极氧化电泳涂漆工艺技术规范(中英文版)
Technical specification for process of anodizing and electrodeposition painting on aluminium alloy extruded profiles for architecture
GB/T 42186-2022
医学检验生物样本冷链物流运作规范(中英文版)
Operational Specifications for Cold Chain Logistics of Biological Samples for Medical Testing
GB/T 4461-2007
热双金属带材(中英文版)
Thermostat bimetal strip
GB/T 17999.4-2008
SPF鸡 微生物学监测 第4部分:SPF鸡 血清平板凝集试验(中英文版)
SPF chicken - Microbiological surveillance - Part 4: Serum plate agglutination test for SPF chicken
GB/T 30198-2013
汽车轮胎不圆度试验方法(中英文版)
Test method for run-out of motor vehicle tyres
GB/T 10305-1988
阴极碳酸盐粒度分布的测定 离心沉降法(中英文版)
Test method for particle distribution of cathode carb-onates by centrifugation sedimentation
GB/T 1687.1-2016
硫化橡胶 在屈挠试验中温升和耐疲劳性能的测定 第1部分:基本原理(中英文版)
Rubber, vulcanized—Determination of temperature rise and resistance to fatigue in flexometer testing—Part 1: Basic principles
GB/T 41249-2021
产业帮扶 “猪-沼-果(粮、菜)” 循环农业项目运营管理指南(中英文版)
Industrial assistance—Guidance for operation management of “pig-biogas-fruit (grain and vegetable)”circular agricultural project
GB 25578-2010
食品安全国家标准 食品添加剂 滑石粉(中英文版)
National Food Safety Standard-Food Additives-talcum powder
GB/T 32255-2015
高温承压马氏体不锈钢和合金钢通用铸件(中英文版)
General martensitic stainless steel and alloy steel castings suitable for high temperature and high pressure service
GB/T 3098.23-2020
紧固件机械性能 M42~M72螺栓、螺钉和螺柱(中英文版)
Mechanical properties of fasteners—M42~M72 bolts, screws and studs
GB/T 17656-2008
混凝土模板用胶合板(中英文版)
Plywood for concrete form
GB 29383-2012
烟嘧磺隆原药(中英文版)
Nicosulfuron technical material
GB/T 7027-2002
信息分类和编码的基本原则与方法(中英文版)
Basic principles and methods for information classifying and coding
GB/T 51362-2019
制造工业工程设计信息模型应用标准(中英文版)
Application standard for manufacturing industry design information model
GB/T 44034-2024
铁矿石-矿浆的取样方法(中英文版)
Iron ore - Sampling method of ore pulp
GB/T 20969.4-2008
特殊环境条件 高原机械 第4部分:高原自然环境试验导则 内燃动力机械(中英文版)
Special environmental condition - Machinery for plateau - Part 4: Guide rule of test for plateau natural environment - Internal combustion engines
GB/T 24444-2009
电渣重熔结晶器(中英文版)
Electroslag remelting mould
GB/T 36550-2018
抽水蓄能电站基本名词术语(中英文版)
Basic terminology of pumped storage power station
GB/T 13748.3-2005
镁及镁合金化学分析方法 锂含量的测定 火焰原子吸收光谱法(中英文版)
Chemical analysis methods of magnesium and magnesium alloys Determination of lithium content Flame atomic absorption spectrometric method
GB/T 42466-2023
生物样本库多能干细胞管理技术规范(中英文版)
Technical specifications for the management of pluripotent stem cells in biobanks
GB 28143-2011
吡虫啉乳油(中英文版)
Imidacloprid emulsifiable concentrates
GB/T 6883-2017
线、棒、管拉模用硬质合金烧结品 尺寸(中英文版)
Cemented carbide sintering body for wire, bar or tube drawing dies—Dimensions
GB/T 41344.4-2022
机械安全 风险预警 第4部分:措施(中英文版)
Machinery Safety Risk Warning Part 4: Measures

找到:57335條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [1045] [1046] [1047] [1048] [1049] [1050] [1051]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved