网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 27694-2011
工业车辆安全 振动的测量方法(中英文版)
Safety of industrial trucks - Test methods for measuring vibration
GB/T 18655-2018
车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法(中英文版)
Vehicles, boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers
GB/T 42983.4-2023
工业机器人 运行维护 第4部分:预测性维护(中英文版)
Industrial Robot Operation and Maintenance Part 4: Predictive Maintenance
GB/T 7652-2006
八角(中英文版)
Star anise
GB 7465-2009
高活度钴60密封放射源(中英文版)
High activity cobalt-60 sealed radioactive sources
GB/T 12857-1991
电视广播接收机在非标准广播信号条件下的测量方法(中英文版)
Methods of measurement under conditions different from broadcast signal standards on receivers for television broadcast transmissions
GB/T 5447-2014
烟煤黏结指数测定方法(中英文版)
Determination of caking index of bituminous coal
GB/T 34579-2017
等离子显示设备150kHz~30MHz辐射骚扰限值和测量方法(中英文版)
Methods of measurement and limits for radiated disturbances from plasma display panel equipment in the frequency range 150kHz to 30MHz
GB/T 41158.2-2022
机械产品三维工艺设计 第2部分:通用要求(中英文版)
Three-dimensional process planning for mechanical products—Part 2:General requirements
GB/T 25863-2010
不锈钢烧结金属丝网多孔材料及其元件(中英文版)
Stainless steel sintered metal mesh materials and components
GB/T 17693.9-2017
外语地名汉字译写导则 第9部分:波斯语(中英文版)
Transformation guidelines of geographical names from foreign languages into Chineses—Part 9: Persain
GB/T 8243.12-2021
内燃机全流式机油滤清器试验方法 第12部分:颗粒计数法滤清效率和容灰量(中英文版)
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity
GB/T 17980.4-2000
农药 田间药效试验准则(一) 杀虫剂防治水稻飞虱(中英文版)
Pesticide--Guidelines for the field efficacy trials(I)--Insecticides against planthopper on rice
GB/T 1443-1996
机床和工具柄用自夹圆锥(中英文版)
Machine tools--Self-holding tapers for tool shanks
GB/T 7897-2008
钢丝网水泥用砂浆力学性能试验方法(中英文版)
Test methods of mechanical properties of mortar for ferrocement
GB/T 50841-2013
建设工程分类标准(中英文版)
Standard of construction classification
GB/T 23724.1-2016
起重机 检查 第1部分:总则(中英文版)
Cranes—Inspections—Part 1: General
GB/T 38924.7-2020
民用轻小型无人机系统环境试验方法 第7部分:湿热试验(中英文版)
Environmental test methods for civil small and light unmanned aircraft system—Part 7: Humidity test
GB/T 21064-2007
电子政务系统总体设计要求(中英文版)
System general design requirements for electronic government
GB/T 24695-2009
食品包装用玻璃纸(中英文版)
Cellophane used for food packaging
GB/T 38261-2019
纳米技术 生物样品中银含量测量 电感耦合等离子体质谱法(中英文版)
Nanotechnology—Determination of silver contents in biological samples—Inductively coupled plasma mass spectrometry
GB/T 28120-2011
面粉纸袋(中英文版)
Paper sacks for flour
GB/T 36236-2018
热熔胶贴标机(中英文版)
Hot melt glue labeling machine
GB/T 23101.3-2023
外科植入物 羟基磷灰石 第3部分:结晶度和相纯度的化学分析和表征(中英文版)
Surgical implants Hydroxyapatite Part 3: Chemical analysis and characterization of crystallinity and phase purity
GB/T 14926.22-2001
实验动物 小鼠肝炎病毒检测方法(中英文版)
Laboratory animal--Method for examination of mouse hepatitis virus(MHV)
GB/T 23415-2009
隔离检疫圃分级(中英文版)
Classification for post-entry quarantine station
GB/T 16919-1997
食用螺旋藻粉(中英文版)
Food grade spirulina powder
GB/T 5275.7-2014
气体分析 动态体积法制备校准用混合气体 第7部分:热式质量流量控制器(中英文版)
Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 7: Thermal mass-flow controllers
GB/T 34719-2017
结构用人造板均布荷载性能测试方法(中英文版)
Standard test method for performance of structural wood-based panel under uniform loads
GB/T 3623-2022
钛及钛合金丝(中英文版)
Titanium and titanium alloy wire
GB/T 15972.20-2008
光纤试验方法规范 第20部分:尺寸参数的测量方法和试验程序 光纤几何参数(中英文版)
Specifications for optical fibre test methods - Part 20: Measurement methods and test procedures for dimensions - Fiber geometry
GB/T 7962.16-2010
无色光学玻璃测试方法 第16部分:线膨胀系数、转变温度和弛垂温度(中英文版)
Test methods of colourless optical glass - Part 16: Linear thermal expansion coefficient,transformation temperature and yield point temperature
GB/T 5169.10-2017
电工电子产品着火危险试验 第10部分:灼热丝/热丝基本试验方法 灼热丝装置和通用试验方法(中英文版)
Fire hazard testing for electric and electronic products—Part 10: Glowing/hot-wire based test methods—Glow-wire apparatus and common test procedure
GB/T 4857.18-1992
包装 运输包装件 编制性能试验大纲的定量数据(中英文版)
Packaging--Transport packages--Quantitative data for the compilation of performance test schedules
GB/T 40390-2021
独立新风空调设备评价要求(中英文版)
Evaluation requirements for dedicated outdoor air conditioning equipment
GB/T 20063.5-2006
简图用图形符号 第5部分:测量与控制装置(中英文版)
Graphical symbols for diagrams -Part 5: Measurement and control devices
GB/Z 29496.2-2013
控制与通信网络CC-Link Safety 规范 第2部分:行规(中英文版)
Control & communication network CC-Link Safety Specification - Part 2: Profiles
GB/T 7247.4-2016
激光产品的安全 第4部分:激光防护屏(中英文版)
Safety of laser products —Part 4: Laser guards
GB/T 38624.2-2021
物联网 网关 第2部分:面向公用电信网接入的网关技术要求(中英文版)
Internet of things—Gateway—Part 2: Technical requirements of gateway accessing the public telecommunication network
GB 18871-2002
电离辐射防护与辐射源安全基本标准(中英文版)
Basic standards for protection against ionizing radiation and for the safety of radiation sources
GB 50582-2010
室外作业场地照明设计标准(中英文版)
Standard for lighting design of outdoor work places
GB/T 17243-1998
饲料用螺旋藻粉(中英文版)
Feed grade spirulina powder
GB/T 31856-2015
废氯气处理处置规范(中英文版)
Treatment and disposal specification for waste chlorine
GB/T 39491-2020
汽车用碳纤维复合材料覆盖部件通用技术要求(中英文版)
General technical requirements of carbon fiber composites covering parts for automobiles
GB/T 3903.19-2008
鞋类 金属附件试验方法 耐腐蚀性(中英文版)
Footwear - Test methods for accessories:Metallic accessories - Corrosion resistance
GB/T 28393-2012
道路施工与养护机械设备 沥青碎石同步封层车(中英文版)
Road construction and road maintenance machinery and equipment - Synchronous chips seal truck
GB/T 25121.1-2018
轨道交通-机车车辆设备-电力电子电容器-第1部分:纸/塑料薄膜电容器(中英文版)
Railway applications—Rolling stock equipment—Capacitors for power electronics—Part 1: Paper/plastic film capacitors
GB/T 43493.2-2023
半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第2部分:缺陷的光学检测方法(中英文版)
Semiconductor devices - Non-destructive testing and identification criteria for defects in silicon carbide homoepitaxial wafers for power devices - Part 2: Optical detection methods for defects
GB/T 4169.9-2006
塑料注射模零件 第9部分:限位钉(中英文版)
Components of injection moulds for plastics - Part 9: Stop pin
GB 23489-2009
食品添加剂 大茴香脑(天然)(中英文版)
Food additive - Natural anethole

找到:57335條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [121] [122] [123] [124] [125] [126] [127]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved