中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 21015-2023 稻谷干燥技术规范(中英文版) Paddy Drying Technical Specifications |
![]() |
|
![]() |
GB/T 26771-2011 微波交通流检测器的设置(中英文版) The setting specification for microwave traffic detector |
![]() |
|
![]() |
GB/T 14785-2008 农林拖拉机和机械 车轮侧向负载疲劳试验方法(中英文版) Tractors and machiney for agricultural and forestry - Test methods of wheels side load fatigue |
![]() |
|
![]() |
GB/T 33624-2017 滚动轴承 清洁度测量及评定方法(中英文版) Rolling bearings—Test and assessment methods for cleanliness |
![]() |
|
![]() |
GB/T 1174-2022 铸造轴承合金(中英文版) Cast bearing alloy |
![]() |
|
![]() |
GB/T 22660.7-2008 氟化锂化学分析方法 第7部分:三氧化二铁含量的测定 邻二氮杂菲分光光度法(中英文版) Chemical analysis methods of lithium fluoride - Part 7: Determination of iron content - Orthophenantholine photometric method |
![]() |
|
![]() |
GB/T 13748.18-2005 镁及镁合金化学分析方法 氯含量的测定 氯化银浊度法(中英文版) Chemical analysis methods of magnesium and magnesium alloys Determination of chlorine content Silver chlorine turbidimetric method |
![]() |
|
![]() |
GB/T 4267-2004 直柄回转工具 柄部直径和传动方头的尺寸(中英文版) Rotating tools with parallel shanks--Diameters of shanks and sizes of driving squares |
![]() |
|
![]() |
GB/T 30040.3-2013 双层罐渗漏检测系统 第3部分:储罐的液体媒介系统(中英文版) Leak detection systems―Part 3:Liquid systems for tanks |
![]() |
|
![]() |
GB 31604.6-2016 食品安全国家标准 食品接触材料及制品 树脂中灼烧残渣的测定(中英文版) National Food Safety Standard-Food contact materials and products-DETERMINATION OF RESIDUES FROM RESIN IN RESINS |
![]() |
|
![]() |
GB/T 40571-2021 智能服务 预测性维护 通用要求(中英文版) Intelligent service—Predictive maintenance—General requirements |
![]() |
|
![]() |
GB/T 25341.1-2010 铁路旅客运输服务质量 第1部分:车站(中英文版) Quality of railway passenger service - Part 1:Station |
![]() |
|
![]() |
GB/T 18256-2015 钢管无损检测 用于确认无缝和焊接钢管(埋弧焊除外)水压密实性的自动超声检测方法(中英文版) Non-destructive testing of steel tubes—Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness |
![]() |
|
![]() |
GB/T 39315.3-2020 军民通用资源 数据模型 第3部分:器材类 航材(中英文版) General resource of military and civilian—Data model—Part 3:Equipment—Aviation repair parts |
![]() |
|
![]() |
GB/T 3286.4-2012 石灰石及白云石化学分析方法 第4部分:氧化铁含量的测定 邻二氮杂菲分光光度法和火焰原子吸收光谱法(中英文版) Methods for chemical analysis of limestone and dolomite - Part 4: The determination of iron oxide content - The o-phenanthroline spectrophotometric method and the flame atomic absorption spectrometric method |
![]() |
|
![]() |
GB/T 21980-2008 专业运动服装和防护用品通用技术规范(中英文版) Current technical criterion for sportswear and exposure suit |
![]() |
|
![]() |
GB/T 267-1988 石油产品闪点与燃点测定法 (开口杯法)(中英文版) Petroleum products--Determinationof flash and fire points--Open cup |
![]() |
|
![]() |
GB/T 37281-2019 废铅酸蓄电池回收技术规范(中英文版) Technical specification for recycling waste lead acid battery |
![]() |
|
![]() |
GB/T 20715-2024 犊牛代乳粉(中英文版) Determination of trimethoprim, trimethoprim and trimethoprim in feed |
![]() |
|
![]() |
GB/T 15006-2009 弹性合金的尺寸、外形、表面质量、试验方法和检验规则的一般规定(中英文版) General rules of dimensions,shape,surface quality, test method and inspection for elastic alloys |
![]() |
|
![]() |
GB/T 20332-2006 锥柄机用1:50锥度销子铰刀(中英文版) Machine taper 1:50 pin reamers with Morse taper shanks |
![]() |
|
![]() |
GB/T 31394-2015 数控三维钻床(中英文版) CNC three dimensions drilling machine |
![]() |
|
![]() |
GB/T 35972-2018 供暖与空调系统节能调试方法(中英文版) Energy-saving commissioning method of heating and air conditioning system |
![]() |
|
![]() |
GB/T 14092.2-2023 机械产品环境条件 第2部分:寒冷(中英文版) Environmental conditions for mechanical products - Part 2: Cold |
![]() |
|
![]() |
GB/T 26980-2011 液化天然气(LNG)车辆燃料加注系统规范(中英文版) Liquefied natural gas (LNG) vehicular fueling systems code |
![]() |
|
![]() |
GB/T 17799.1-1999 电磁兼容 通用标准 居住、商业和轻工业环境中的抗扰度试验(中英文版) Electromagnetic compatibility--Generic standards--Immunity for residential,commercial and light-industrial environments |
![]() |
|
![]() |
GB/T 33863.1-2017 OPC统一架构 第1部分:概述和概念(中英文版) OPC unified architecture—Part 1: Overview and concepts |
![]() |
|
![]() |
GB 21341-2022 铁合金单位产品能源消耗限额(中英文版) Energy consumption quota per unit product of ferroalloy |
![]() |
|
![]() |
GB/T 22665.3-2008 手持式电动工具手柄的振动测量方法 第3部分:砂轮机、抛光机和盘式砂光机(中英文版) Measurement of vibrations at the handle of hand-held electric tools - Part 3: Grinders, polishers and disk-type sanders |
![]() |
|
![]() |
GB/T 30344-2013 国际货运代理铁海联运作业规范(中英文版) Operational norms of rail-sea combined transportation for international freight forwarders |
![]() |
|
![]() |
GB 22174-2008 烯唑醇可湿性粉剂(中英文版) diniconazole wettable power |
![]() |
|
![]() |
GB/T 14158-1993 区域水文地质工程地质环境地质综合勘查规范(比例尺1∶50000)(中英文版) Synthetical survey code for regional hydrogeology,engineering geology and environmental geology |
![]() |
|
![]() |
GB/T 33225-2016 风力发电机组 基于机舱风速计法的功率特性测试(中英文版) Electricity producing wind turbines—Power performance measurements based on nacelle anemometry |
![]() |
|
![]() |
GB/T 2449.1-2021 工业硫磺 第1部分:固体产品(中英文版) Sulphur for industrial use—Part 1: Solid product |
![]() |
|
![]() |
GB/T 14945-2010 货物运输常用残损代码(中英文版) General codes for broken & damaged cargo in transport |
![]() |
|
![]() |
GB/T 20953-2007 农林拖拉机和机械 驾驶室内饰材料燃烧特性的测定(中英文版) Tractors and machinery for agriculture and forestry - Determination of burning behavior of cab interior materials |
![]() |
|
![]() |
GB/T 32172-2015 基于ebXML不可撤销跟单信用证申请书报文(中英文版) ebXML based messages of irrevocable documentary credit application |
![]() |
|
![]() |
GB/T 9966.1-2020 天然石材试验方法 第1部分:干燥、水饱和、冻融循环后压缩强度试验(中英文版) Test methods for natural stone--Part 1: Determination of dry, wet and after freezing compressive strength |
![]() |
|
![]() |
GB/T 28997-2012 舞台用木质地板(中英文版) Wooden flooring for stage use |
![]() |
|
![]() |
GB/T 18247.6-2000 主要花卉产品等级 第6部分:花卉种球(中英文版) Product grade for major ornamental plants--Part 6:Flower bulbs |
![]() |
|
![]() |
GB/T 37591-2019 700MW及以上级大电机用冷轧无取向电工钢带(中英文版) Cold-rolled non-grain oriented electrical steel strip specialized for large generators with power of 700MW or higher |
![]() |
|
![]() |
GB/T 44092-2024 体育公园配置要求(中英文版) Sports park configuration requirements |
![]() |
|
![]() |
GB/T 24328.3-2009 卫生纸及其制品 第3部分:抗张强度、断裂时伸长率和抗张能量吸收的测定(中英文版) Tissue paper and tissue products - Part 3: Determination of tensile strength, stretch at break and tensile energy absorption |
![]() |
|
![]() |
GB/T 15054.5-1994 小螺纹 极限尺寸(中英文版) Miniature screw threads--Limits of sizes |
![]() |
|
![]() |
GB/T 11701-1989 船用舷梯的基本规定(中英文版) The general rules for marine accommodation ladders |
![]() |
|
![]() |
GB/T 36291.1-2018 电力安全设施配置技术规范 第1部分:变电站(中英文版) Regulation for safety facilities configuration of electric power industry—Part 1: Substation |
![]() |
|
![]() |
GB/T 29465-2023 浮头式热交换器用法兰(中英文版) Flange for floating head heat exchanger |
![]() |
|
![]() |
GB/T 50065-2011 交流电气装置的接地设计规范(中英文版) Code for design of ac electrical installations earthing |
![]() |
|
![]() |
GB/T 20975.19-2008 铝及铝合金化学分析方法 第19部分:锆含量的测定(中英文版) Methods for chemical analysis of aluminium and aluminium alloys - Part 19:Determination of zirconium content |
![]() |
|
![]() |
GB/T 3325-2017 金属家具通用技术条件(中英文版) General technical requirements for metal furniture |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [136] [137] [138] [139] [140] [141] [142] |