中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 8243.12-2021 内燃机全流式机油滤清器试验方法 第12部分:颗粒计数法滤清效率和容灰量(中英文版) Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity |
|||
GB/T 18115.9-2006 稀土金属及其氧化物中稀土杂质化学分析方法 镝中镧、铈、镨、钕、钐、铕、钆、铽、钬、铒、铥、镱、镥和钇量的测定(中英文版) Chemical analysis methods of rare earth impurities in rare earth metals and their oxides Dysprosium-Determination of lanthanum, cerium, praseodymium, neodymium, samarium, europium, gadolinium, terbium, holmium, erbium, thulium, ytterbium, lutetium and yt |
|||
GB/T 14617.2-2012 陆地移动业务和固定业务传播特性 第2部分:100 MHz~1 000 MHz固定业务传播特性(中英文版) Propagation characteristics in land mobile service and fixed service - Part 2: Propagation characteristics for the terrestrial fixed service in 100 MHz~1 000 MHz |
|||
GB/T 23724.1-2016 起重机 检查 第1部分:总则(中英文版) Cranes—Inspections—Part 1: General |
|||
GB/T 38924.7-2020 民用轻小型无人机系统环境试验方法 第7部分:湿热试验(中英文版) Environmental test methods for civil small and light unmanned aircraft system—Part 7: Humidity test |
|||
GB/T 24318-2009 杜马斯燃烧法测定饲料原料中总氮含量及粗蛋白质的计算(中英文版) Determination of total nitrogen content in animal feeding stuffs by combustion according to the dumas principle and calculation of the crude protein content |
|||
GB/T 15820-1995 聚乙烯压力管材与管件连接的耐拉拔试验(中英文版) Test of resistance to pull out ofjoints between polyethylene (PE) pressure pipes and fittings |
|||
GB/T 12690.13-2003 稀土金属及其氧化物中非稀土杂质化学分析方法 钼、钨量的测定 电感耦合等离子体发射光谱法和电感耦合等离子体质谱法(中英文版) Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum |
|||
GB/T 38261-2019 纳米技术 生物样品中银含量测量 电感耦合等离子体质谱法(中英文版) Nanotechnology—Determination of silver contents in biological samples—Inductively coupled plasma mass spectrometry |
|||
GB/T 22102-2008 防腐木材(中英文版) Preservative-treated wood |
|||
GB/T 27546-2011 起重机械 滑轮(中英文版) Sheaves for cranes |
|||
GB/T 36236-2018 热熔胶贴标机(中英文版) Hot melt glue labeling machine |
|||
GB/T 23101.3-2023 外科植入物 羟基磷灰石 第3部分:结晶度和相纯度的化学分析和表征(中英文版) Surgical implants Hydroxyapatite Part 3: Chemical analysis and characterization of crystallinity and phase purity |
|||
GB/T 20847.1-2007 小艇 防火 第1部分:艇体长度不大于15m的艇(中英文版) Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15m |
|||
GB/T 22960-2008 河豚鱼和鳗鱼中头孢唑啉、头孢匹林、头孢氨苄、头孢洛宁、头孢喹肟残留量的测定 液相色谱-串联质谱法(中英文版) Determination of cefazolin, cefapirin, cephalexin, cefalonium, cefquinome residues in fugu and eel - LC-MS-MS method |
|||
GB/T 30447-2013 纳米薄膜接触角测量方法(中英文版) Measurement method for contact angle of nano-film surface |
|||
GB/T 34719-2017 结构用人造板均布荷载性能测试方法(中英文版) Standard test method for performance of structural wood-based panel under uniform loads |
|||
GB/T 3623-2022 钛及钛合金丝(中英文版) Titanium and titanium alloy wire |
|||
GB/T 4857.1-1992 包装 运输包装件 试验时各部位的标示方法(中英文版) Packaging--Complete,filled transport packages--Identification of parts when testing |
|||
GB/T 14211-2010 机械密封试验方法(中英文版) Test method of mechanical seal |
|||
GB 16188-1996 车间空气中氧化乐果卫生标准(中英文版) Health standard for omethoate in the air ofworkplace |
|||
GB/T 5169.10-2017 电工电子产品着火危险试验 第10部分:灼热丝/热丝基本试验方法 灼热丝装置和通用试验方法(中英文版) Fire hazard testing for electric and electronic products—Part 10: Glowing/hot-wire based test methods—Glow-wire apparatus and common test procedure |
|||
GB/T 19562-2004 大豆食心虫测报调查规范(中英文版) Rules for investigation and forecast of soybeanmoth [Leguminivora glycinivorella (Masts.)] |
|||
GB/T 40390-2021 独立新风空调设备评价要求(中英文版) Evaluation requirements for dedicated outdoor air conditioning equipment |
|||
GB 22360-2008 真空泵 安全要求(中英文版) Vacuum pumps - Safety requirements |
|||
GB/T 29001.3-2012 机床数控系统 NCUC-Bus现场总线协议规范 第3部分:数据链路层(中英文版) Numerical control system of machine tool - Protocol specifications for NCUC-Bus fieldbus - Part 3:Data link layer |
|||
GB/T 7247.4-2016 激光产品的安全 第4部分:激光防护屏(中英文版) Safety of laser products —Part 4: Laser guards |
|||
GB/T 38624.2-2021 物联网 网关 第2部分:面向公用电信网接入的网关技术要求(中英文版) Internet of things—Gateway—Part 2: Technical requirements of gateway accessing the public telecommunication network |
|||
GB/T 17525-1998 微型水力发电设备安装技术规范(中英文版) Specification for installation of micro-hydro generator equipments |
|||
GB/T 7702.6-2008 煤质颗粒活性炭试验方法 亚甲蓝吸附值的测定(中英文版) Test method for granular activated carbon from coal - Determination of methylene blue adsorption |
|||
GB/T 14743-2009 港口轮胎起重机(中英文版) Port of wheel crane |
|||
GB/T 31856-2015 废氯气处理处置规范(中英文版) Treatment and disposal specification for waste chlorine |
|||
GB/T 39491-2020 汽车用碳纤维复合材料覆盖部件通用技术要求(中英文版) General technical requirements of carbon fiber composites covering parts for automobiles |
|||
GB/T 12603-2005 金属热处理工艺分类及代号(中英文版) Classifications and designations for metal heat treatment |
|||
GB/T 20633.2-2011 承载印制电路板用涂料(敷形涂料) 第2部分:试验方法(中英文版) Coatings for loaded printed wire boards (conformal coatings) - Part 2:Methods of test |
|||
GB/T 16641-1996 成鞋动态防水性能试验方法(中英文版) Test method for dynamic waterproofness of finished footwear |
|||
GB/T 25121.1-2018 轨道交通-机车车辆设备-电力电子电容器-第1部分:纸/塑料薄膜电容器(中英文版) Railway applications—Rolling stock equipment—Capacitors for power electronics—Part 1: Paper/plastic film capacitors |
|||
GB/T 43493.2-2023 半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第2部分:缺陷的光学检测方法(中英文版) Semiconductor devices - Non-destructive testing and identification criteria for defects in silicon carbide homoepitaxial wafers for power devices - Part 2: Optical detection methods for defects |
|||
GB/T 23231-2009 退耕还林工程检查验收规则(中英文版) Checking regulation in project for conversion of cropland to forest |
|||
GB/T 14810-2014 额定电压72.5 kV及以上交流负荷开关(中英文版) Alternating current switches for rated voltages of 72.5 kV and above |
|||
GB 8368-2018 一次性使用输液器 重力输液式(中英文版) Infusion sets for single use—Gravity feed |
|||
GB/T 42731-2023 微电网技术要求(中英文版) Microgrid Technical Requirements |
|||
GB 18093-2000 航海日志(中英文版) Deck log book |
|||
GB 7260.1-2008 不间断电源设备 第1-1部分: 操作人员触及区使用的UPS的一般规定和安全要求(中英文版) Uninterruptible power systems(UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas |
|||
GB/T 901-1988 等长双头螺柱 B级(中英文版) Double end studs (clamping type)--Product grade B |
|||
GB/T 13763-2010 土工合成材料 梯形法撕破强力的测定(中英文版) Geosynthetics - Determination of trapezoid tearing force |
|||
GB/T 11263-2017 热轧H型钢和剖分T型钢(中英文版) Hot rolled H and cut T section steel |
|||
GB/T 20626.3-2022 特殊环境条件 高原电工电子产品 第3部分:雷电、污秽、凝露的防护要求(中英文版) Special environmental conditions High altitude electrical and electronic products - Part 3: Protection requirements for lightning, pollution and condensation |
|||
GB/T 20316.2-2006 普通磨料 堆积密度的测定 第2部分:微粉(中英文版) Abrasive grains - Determination of bulk density - Part 2: Microgrits |
|||
GB/T 29158-2012 带辅助能源的太阳能热水系统(储水箱容积大于0.6m3)技术规范(中英文版) Technical code for solar-plus-supplementary water heating system (tank capacity more than 0.6m3) |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [154] [155] [156] [157] [158] [159] [160] |