中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 14481-2008 单相同步电机试验方法(中英文版) Test procedure for single-phase synchronous machines |
![]() |
|
![]() |
GB/T 16484.4-2009 氯化稀土、碳酸轻稀土化学分析方法 第4部分:氧化钍量的测定 偶氮胂Ⅲ分光光度法(中英文版) Chemical analysis methods of rare earth chloride and light rare earth carbonate - Part 4: Determination of thorium oxide content - ArsenazoⅢ spectrophotometry |
![]() |
|
![]() |
GB/T 1819.13-2004 锡精矿化学分析方法 氧化镁、氧化钙量的测定 火焰原子吸收光谱法(中英文版) Methodsfor chemical analysis of tin concentrates--Determination of magnesium oxide andcalcium oxide contents--Flame atomic absorption spectrometric method |
![]() |
|
![]() |
GB/T 14189-2015 纤维级聚酯切片(PET)(中英文版) Fiber grade polyester chip(PET) |
![]() |
|
![]() |
GB/T 13182-2007 碘化钠(铊)闪烁体和碘化钠(铊)闪烁探测器(中英文版) Thallium-actived sodium iodide scintillator and scintillation detectors of sodium iodide(thallium) |
![]() |
|
![]() |
GB/T 12604.1-2020 无损检测 术语 超声检测(中英文版) Non-destructive testing—Terminology—Ultrasonic testing |
![]() |
|
![]() |
GB/T 5203-2011 核反应堆安全逻辑装置特性和检验方法(中英文版) Safety logic assemblies of nuclear reactor characteristics and test methods |
![]() |
|
![]() |
GB/T 37262-2018 石油天然气工业-铝合金钻杆螺纹连接测量(中英文版) Petroleum and natural gas industries—Aluminium alloy drill pipe thread connection gauging |
![]() |
|
![]() |
GB/T 43587-2023 老人鞋(中英文版) old people's shoes |
![]() |
|
![]() |
GB/T 11837-2009 混凝土管用混凝土抗压强度试验方法(中英文版) Test methods of the concrete compressive strength of concrete pipes for water |
![]() |
|
![]() |
GB 30584-2014 起重机臂架用无缝钢管(中英文版) Seamless steel pipes for crane jib |
![]() |
|
![]() |
GB/T 23341.1-2018 涡轮增压器 第1部分:一般技术条件(中英文版) Turbochargers—Part 1:General requirements |
![]() |
|
![]() |
GB/T 10827.4-2023 工业车辆 安全要求和验证 第4部分:无人驾驶工业车辆及其系统(中英文版) Industrial vehicles - Safety requirements and verification - Part 4: Unmanned industrial vehicles and their systems |
![]() |
|
![]() |
GB/T 25896.3-2010 设备用图形符号 起重机 第3部分:塔式起重机符号(中英文版) Graphical symbols for use on equipment - Cranes - Part 3: Tower cranes symbols |
![]() |
|
![]() |
GB 9706.24-2005 医用电气设备 第2-45部分:乳腺X射线摄影设备及乳腺摄影立体定位装置 安全专用要求(中英文版) Medical electrical equipment-Part2-45:Particular requirements for the safety of mammographic X-ray equipment and mammographic sterotactic devices |
![]() |
|
![]() |
GB/T 13213-2017 猪肉糜类罐头(中英文版) Canned pork mince |
![]() |
|
![]() |
GB/T 1613-2008 工业硝酸钡(中英文版) Barium nitrate for industrial use |
![]() |
|
![]() |
GB/T 23920-2022 低速汽车 最高车速测定方法(中英文版) Low-speed vehicles - Maximum speed measurement method |
![]() |
|
![]() |
GB/T 4324.5-2012 钨化学分析方法 第5部分:砷量的测定 氢化物原子吸收光谱法(中英文版) Methods for chemical analysis of tungsten - Part 5: Determination of arsenic content - Hydrogenate atomic absorption spectrometry |
![]() |
|
![]() |
GB/T 19976-2005 纺织品 顶破强力的测定 钢球法(中英文版) Textiles-Determination of bursting strength-Steel ball method |
![]() |
|
![]() |
GB/T 6730.35-2016 铁矿石 铜含量的测定 双环己酮草酰二腙分光光度法(中英文版) Iron ores—Determination of copper content—Oxalic acid bis-cyclohexylidene hydragide (cuprizone) spectrophotometric method |
![]() |
|
![]() |
GB/T 41016-2021 水回用导则 再生水厂水质管理(中英文版) Water reuse guidelines- Water quality management for water reclamation plants |
![]() |
|
![]() |
GB/T 4772.1-1999 旋转电机尺寸和输出功率等级 第1部分:机座号56~400和凸缘号55~1080(中英文版) Dimensions and output series for rotating electrical machines--Part 1:Frame numbers 56 to 400 and flange numbers 55 to 1080 |
![]() |
|
![]() |
GB/T 18689-2009 农业灌溉设备 小型手动塑料阀(中英文版) Agricultural irrigation equipment- Manually operated small plastics valves |
![]() |
|
![]() |
GB/T 32163.3-2015 生态设计产品评价规范 第3部分:杀虫剂(中英文版) Specification for eco-design product assessment—Part 3: Insecticides |
![]() |
|
![]() |
GB 9706.244-2020 医用电气设备 第2-44部分:X射线计算机体层摄影设备的基本安全和基本性能专用要求(中英文版) Medical electrical equipment—Part 2-44:Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
![]() |
|
![]() |
GB/T 27838-2011 烷基磺酸和芳基磺酸类物质危险特性分类方法(中英文版) Test method for hazard classification of alkylsulphonic acids and arylsulphonic acid mixtures |
![]() |
|
![]() |
GB/T 37677-2019 滑动轴承 汽车曲轴轴瓦工作环境推荐参数(中英文版) Plain bearings—Recommendations for automotive crankshaft bearing environments |
![]() |
|
![]() |
GB/T 5121.1-2008 铜及铜合金化学分析方法 第1部分:铜含量的测定(中英文版) Methods for chemical analysis of copper and copper alloys - Part 1:Determination of copper content |
![]() |
|
![]() |
GB/T 3594-2024 渔船用电子设备电源技术要求(中英文版) Technical requirements for power supply of electronic equipment for fishing vessels |
![]() |
|
![]() |
GB 18967-2009 改性沥青聚乙烯胎防水卷材(中英文版) Modified bituminous waterproof sheet using polyethylene reinforcement |
![]() |
|
![]() |
GB/T 30778-2014 聚醋酸乙烯-丙烯酸酯乳液纸塑冷贴复合胶(中英文版) Polyvinyl acetate-acrylate mulsion adhesive for the laminating of paper/polymer films at room temperature |
![]() |
|
![]() |
GB/T 20516-2006 半导体器件 分立器件 第4部分:微波器件(中英文版) Semiconductor devices - Discrete devices - Part 4: Microwave devices |
![]() |
|
![]() |
GB/T 36770-2018 澳洲葡萄类病毒检疫鉴定方法(中英文版) Detection and identification of Australian grapevine viroid |
![]() |
|
![]() |
GB/Z 42963-2023 产业帮扶 竹产业项目运营管理指南(中英文版) Industrial Assistance Bamboo Industry Project Operation and Management Guide |
![]() |
|
![]() |
GB/T 879.4-2000 弹性圆柱销 卷制 标准型(中英文版) Spring-type straight pins--Coiled,standard duty |
![]() |
|
![]() |
GB/T 25920-2010 饮用冷水水表塑料表壳及承压件技术规范(中英文版) Plastic body and pressured parts of the meter for cold potable water - Technical specifications |
![]() |
|
![]() |
GB/T 34275-2017 压力管道规范 长输管道(中英文版) Pressure piping code—Long-distance pipeline |
![]() |
|
![]() |
GB/T 22933-2022 皮革和毛皮 化学试验 游离脂肪酸的测定(中英文版) Leather and furs - Chemical tests - Determination of free fatty acids |
![]() |
|
![]() |
GB/T 21419-2013 变压器、电抗器、电源装置及其组合的安全 电磁兼容(EMC)要求(中英文版) Safety of transformers,reactors,power supply units and combinations thereof-EMC requirements |
![]() |
|
![]() |
GB/T 35435-2017 空间站科学实验柜通用设计规范(中英文版) General design specification of science experiment rack in space station |
![]() |
|
![]() |
GB/T 2900.36-2021 电工术语 电力牵引(中英文版) Electrotechnical terminology—Electric traction |
![]() |
|
![]() |
GB/T 1630.1-2008 塑料 环氧树脂 第1部分:命名(中英文版) Plastics - Epoxy resins - Part 1: Designation |
![]() |
|
![]() |
GB 19645-2010 食品安全国家标准 巴氏杀菌乳(中英文版) National food safety standard Pasteurized milk |
![]() |
|
![]() |
GB/T 32417-2015 信息技术 用于老年人和残疾人的办公设备可访问性指南(中英文版) Information technology—Office equipment accessibility guidelines for elderly persons and persons with disabilities |
![]() |
|
![]() |
GB/T 21100-2007 动物源性饲料中骆驼源性成分定性检测方法 PCR方法(中英文版) Identification of camelidae derived material in animal - originated feedstuff PCR method |
![]() |
|
![]() |
GB/T 30269.809-2020 信息技术 传感器网络 第809部分:测试:基于IP的无线传感器网络网络层协议一致性测试(中英文版) Information technology—Sensor networks—Part 809:Testing:Conformance testing for the network layer of wireless sensor networks based on IP protocol |
![]() |
|
![]() |
GB/T 18594-2001 技术产品文件 字体 拉丁字母、数字和符号的CAD字体(中英文版) Technical product documentation--Lettering CAD lettering of the latin alphabet numerals and marks |
![]() |
|
![]() |
GB 28327-2012 食品安全国家标准 食品添加剂 乙酸辛酯(中英文版) National Food Safety Standard - Food Additive - Octyl Acefafe |
![]() |
|
![]() |
GB/T 37943-2019 北斗卫星授时终端测试方法(中英文版) Test methods for BDS timing terminal |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [177] [178] [179] [180] [181] [182] [183] |