中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 41512-2022 分散式风力发电机组(中英文版) Distributed Wind Turbine |
![]() |
|
![]() |
GB/T 13086-1991 饲料中游离棉酚的测定方法(中英文版) Method for determination of free gossypol in feeds |
![]() |
|
![]() |
GB 19173-2010 桑树种子和苗木(中英文版) Seed and sapling of mulberry |
![]() |
|
![]() |
GB/T 20564.3-2007 汽车用高强度冷连轧钢板及钢带 第3部分:高强度无间隙原子钢(中英文版) Continuously cold rolled high strength steel sheet and strip for automobile - Part 3: High strength interstitial free steel |
![]() |
|
![]() |
GB/T 35786-2017 机动车电子标识读写设备通用规范(中英文版) General specification for read-write equipment of the electronic identification of motor vehicles |
![]() |
|
![]() |
GB/T 22515-2008 粮油名词术语 粮食、油料及其加工产品(中英文版) Terminology of grain and oil - Grain and oil-bearing material and their prouducts |
![]() |
|
![]() |
GB/T 40282-2021 结构级和高强度双辊铸轧热轧薄钢板及钢带(中英文版) Hot-rolled twin roll cast steel sheets and strips of structural quality and high strength steel |
![]() |
|
![]() |
GB/T 29833.3-2013 系统与软件可移植性 第3部分:测试方法(中英文版) Portability of system and software - Part 3: Testing method |
![]() |
|
![]() |
GB 15097-2016 船舶发动机排气污染物排放限值及测量方法(中国第一、二阶段)(中英文版) Limits and measurement methods for exhaust pollutants from marine engines (CHINAⅠ、Ⅱ) |
![]() |
|
![]() |
GB/T 40624-2021 黄瓜绢野螟检疫鉴定方法(中英文版) Detection and identification of Diaphania nitidalis (Stoll) |
![]() |
|
![]() |
GB/T 22554-2010 基于标准样品的线性校准(中英文版) Linear calibration using reference materials |
![]() |
|
![]() |
GB/T 16461-1996 单刃车削刀具寿命试验(中英文版) Tool-life testing with single-point turning tools |
![]() |
|
![]() |
GB 19434.8-2004 危险货物刚性塑料中型散装容器检验安全规范 性能检验(中英文版) Safety code for theinspection of rigid plastics IBCs for dangerous goods--Performance tests |
![]() |
|
![]() |
GB/T 31795-2015 番茄黑环病毒检疫鉴定方法(中英文版) Detection and identification of Tomato black ring virus |
![]() |
|
![]() |
GB/T 14399-2008 信息技术 系统间远程通信和信息交换 高级数据链路控制规程 与X.25 LAPB兼容的DTE数据链路规程的描述(中英文版) Information technology - Telecommunications and information exchange between systems - High-level data link control procedures - Description of the X.25 LAPB-compatible DTE data link procedures |
![]() |
|
![]() |
GB/T 24981.1-2020 稀土长余辉荧光粉试验方法 第1部分:发射主峰和色品坐标的测定(中英文版) Test methods of rare earth long afterglow phosphors—Part 1: Determination of emission dominantpeak and chromaticity coordinates |
![]() |
|
![]() |
GB 13614-2012 短波无线电收信台(站)及测向台(站)电磁环境要求(中英文版) Electromagnetic environment requirements for-Short-wave radio receiving and direction finding stations |
![]() |
|
![]() |
GB/T 21388-2008 游标、带表和数显深度卡尺(中英文版) Vernier, dial and digital display depth callipers |
![]() |
|
![]() |
GB/T 37078-2018 出入口控制系统技术要求(中英文版) Technical specifications for access control system |
![]() |
|
![]() |
GB 23821-2009 机械安全 防止上下肢触及危险区的安全距离(中英文版) Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs |
![]() |
|
![]() |
GB/T 32234.9-2023 个人浮力设备 第9部分:试验方法(中英文版) Personal buoyancy devices Part 9: Test methods |
![]() |
|
![]() |
GB/T 6730.62-2005 铁矿石 钙、硅、镁、钛、磷、锰、铝和钡含量的测定 波长色散X射线荧光光谱法(中英文版) Iron ores-Determination of calcium,silicon,manganese,titanium,phosphorus magnesium,aluminium and barium content Wavelength dispersive X-ray fluorescence spectrometric method |
![]() |
|
![]() |
GB/T 31310-2014 金属材料 残余应力测定 钻孔应变法(中英文版) Metallic material—Determination of residual stress—Hole drilling strain-gauge method |
![]() |
|
![]() |
GB/T 35002-2018 微波电路 频率源测试方法(中英文版) Microwave circuits—Measuring methods for frequency source |
![]() |
|
![]() |
GB/T 8151.25-2023 锌精矿化学分析方法 第25部分:铟含量的测定 火焰原子吸收光谱法(中英文版) Methods for chemical analysis of zinc concentrates - Part 25: Determination of indium content - Flame atomic absorption spectrometry |
![]() |
|
![]() |
GB/T 5516-2011 粮油检验 粮食运动粘度测定 毛细管粘度计法(中英文版) Inspection of grain and oils - Determination of viscosity of grain - Capillary viscometer method |
![]() |
|
![]() |
GB/T 11376-1997 金属的磷酸盐转化膜(中英文版) Phosphate conversion coatings for metals |
![]() |
|
![]() |
GB 11239.1-2005 手术显微镜 第1部分:要求和试验方法(中英文版) Operation microscopes Part1:Requirements and test methods |
![]() |
|
![]() |
GB/T 33803-2017 钢筋混凝土阻锈剂耐蚀应用技术规范(中英文版) Technical specification for application of reinforced concrete anti-corrosion inhibitor |
![]() |
|
![]() |
GB/T 22581-2008 混流式水泵水轮机基本技术条件(中英文版) Fundamental technical requirements for francis pump-turbine |
![]() |
|
![]() |
GB/T 41866.3-2022 系统与软件工程 信息技术项目绩效基准度量框架 第3部分:报告编制(中英文版) Systems and software engineering - Performance benchmarking framework for information technology projects - Part 3: Reporting |
![]() |
|
![]() |
GB/T 13988-1992 照相用电子闪光装置与同步线的连接件型式及尺寸(中英文版) Types and dimensions for connectors of electronic photoflash equipment to synchro-cord |
![]() |
|
![]() |
GB 29933-2013 食品安全国家标准 食品添加剂 氧化羟丙基淀粉(中英文版) National Food Safety Standard Food Additive Identification Oxidized hydroxypropyl starch |
![]() |
|
![]() |
GB 21907-2008 生物工程类制药工业水污染物排放标准(中英文版) Discharge standards of water pollutants for pharmaceutical industry bio-pharmaceutical category |
![]() |
|
![]() |
GB/T 4499-2016 硫化橡胶 防老剂的测定 薄层色谱法(中英文版) Rubber,vulcanized—Determination of antidegradants—Thin layer chromatographic method |
![]() |
|
![]() |
GB/T 24606-2021 滚动轴承 无损检测 磁粉检测(中英文版) Rolling bearings—Non-destructive testing—Magnetic particle testing |
![]() |
|
![]() |
GB/T 25273-2010 液晶显示器(LCD)用薄膜 雾度测定方法 积分球法(中英文版) Films for liquid crystal display(LCD) - Determination of haze with integrating sphere |
![]() |
|
![]() |
GB/T 17641-1998 土工合成材料 裂膜丝机织土工布(中英文版) Geosynthetics--Slit and split film yarnwoven geotextiles |
![]() |
|
![]() |
GB/T 20325-2006 六方板牙(中英文版) Hexagonal dienuts |
![]() |
|
![]() |
GB/T 10067.3-2015 电热装置基本技术条件 第3部分:感应电热装置(中英文版) Basic specifications for electroheat installations—Part 3: Induction electroheat installation |
![]() |
|
![]() |
GB/T 33014.8-2020 道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第8部分:磁场抗扰法(中英文版) Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 8:Immunity to magnetic fields |
![]() |
|
![]() |
GB/T 19114.44-2012 工业自动化系统与集成 工业制造管理数据 第44部分:车间级数据采集的信息建模(中英文版) Industrial automation systems and integration - Industrial manufacturing management data - Part 44: Information modelling for shop floor data acquisition |
![]() |
|
![]() |
GB/T 17247.2-1998 声学 户外声传播的衰减 第2部分:一般计算方法(中英文版) Acoustics--Attenuation ofsound during propagation outdoors--Part 2:General method of calculation |
![]() |
|
![]() |
GB/T 5959.41-2019 电热装置的安全 第41部分:对电阻加热装置的特殊要求 玻璃加热和熔化装置(中英文版) Safety in elcctroheating installations—Part 41: Particular requirements for resistance heating equipment—Heating and melting glass equipment |
![]() |
|
![]() |
GB/T 5132.2-2009 电气用热固性树脂工业硬质圆形层压管和棒 第2部分:试验方法(中英文版) Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test |
![]() |
|
![]() |
GB/T 43958-2024 林草物联网-面向视频的无线传感器网络技术要求(中英文版) Forest and grassland Internet of Things-Technical requirements for video-oriented wireless sensor networks |
![]() |
|
![]() |
GB 5009.16-2014 食品安全国家标准 食品中锡的测定(中英文版) National Food Safety Standard-Determination of tin in foods |
![]() |
|
![]() |
GB 22167-2008 氟磺胺草醚原药(中英文版) fomesafen technical |
![]() |
|
![]() |
GB/T 36615-2018 可信性管理 管理和应用指南(中英文版) Dependability management—Guidance for management and application |
![]() |
|
![]() |
GB/T 26797-2011 E1、E2、F1、F2、M1、M1-2、M2、M2-3、M3等级砝码(中英文版) Weights of classes E1、E2、F1、F2、M1、M1-2、M2、M2-3、and M3 |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [200] [201] [202] [203] [204] [205] [206] |