中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 18193-2000 真空技术 质谱检漏仪校准(中英文版) Vacuum technology--Mass-spectrometer-type leak detector calibration |
![]() |
|
![]() |
GB/T 36122-2018 市政消防给水设施维护管理(中英文版) Maintenance and management of municipal fire water supply facilities |
![]() |
|
![]() |
GB/Z 43078-2023 液压传动连接 螺柱端可调管接头的安装指导(中英文版) Hydraulic Transmission Connections Installation Instructions for Stud-End Adjustable Pipe Couplings |
![]() |
|
![]() |
GB/T 24515-2009 高炉用铁矿石 用还原速率表示的还原性的测定(中英文版) Iron ores for blast furnace feedstocks - Determination of the reducibility by the rate of reduction index |
![]() |
|
![]() |
GB/T 8704.6-2007 钒铁 硅含量的测定 硫酸脱水重量法(中英文版) Ferrovanadium - Determination of silicon content - The sulphuric acid dehydration gravimetric method |
![]() |
|
![]() |
GB/T 7179-1997 铁路货运术语(中英文版) Terminology for railway freight traffic |
![]() |
|
![]() |
GB/T 34500.4-2017 稀土废渣、废水化学分析方法 第4部分:铜、锌、铅、铬、镉、 钡、钴、锰、镍、钛量的测定 电感耦合等离子体原子发射光谱法(中英文版) Chemical analysis methods for rare earth waste residue and waste water—Part 4: Determination of copper, zinc, lead, chromium, cadmium, barium, cobalt, manganese, nickel and titanium contents—Inductively coupled plasma emission spectrometry |
![]() |
|
![]() |
GB/T 11449.2-1989 波导法兰盘 第二部分:普通矩形波导法兰盘规范(中英文版) Flanges for waveguides--Part 2:Relevant specification for flanges for ordinary rectangular waveguides |
![]() |
|
![]() |
GB/T 18998.1-2022 工业用氯化聚氯乙烯(PVC-C)管道系统 第1部分:总则(中英文版) Chlorinated polyvinyl chloride (PVC-C) piping systems for industrial use - Part 1: General |
![]() |
|
![]() |
GB/T 13922-2011 水处理设备性能试验(中英文版) Performance test for water treatment equipment |
![]() |
|
![]() |
GB/T 15544.4-2017 三相交流系统短路电流计算 第4部分:同时发生两个独立单相接地故障时的电流以及流过大地的电流(中英文版) Short-circuit current calculation in three-phase a.c.systems—Part 4: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth |
![]() |
|
![]() |
GB/T 40336-2021 无损检测 泄漏检测 气体参考漏孔的校准(中英文版) Non-destructive testing—Leak testing—Calibration of reference leaks for gases |
![]() |
|
![]() |
GB/T 23270.2-2009 信息与文献 开放系统互连 馆际互借应用协议规范 第2部分:协议实施一致性声明(PICS)条文(中英文版) Information and documentation - Open systems interconnection - Interlibrary loan application protocol specification - Part 2: Protocol implementation conformance statement (PICS) proforma |
![]() |
|
![]() |
GB/T 2565-2014 煤的可磨性指数测定方法 哈德格罗夫法(中英文版) Determination of grindability index of coal―Hardgrove method |
![]() |
|
![]() |
GB/T 18524-2001 食品辐照通用技术要求(中英文版) The codex general technical requirement for food irradiation |
![]() |
|
![]() |
GB/T 32644-2016 平板显示器基板玻璃化学耐久性的试验方法(中英文版) Test method for chemical durability of flat panel display glass substrates |
![]() |
|
![]() |
GB 7300.1001-2020 饲料添加剂 第10部分:调味和诱食物质 谷氨酸钠(中英文版) Feed additive—Part 10:Flavouring and appetising substances—Sodium glutamate |
![]() |
|
![]() |
GB/T 17456.2-2010 球墨铸铁管外表面锌涂层 第2部分:带终饰层的富锌涂料涂层(中英文版) Ductile iron pipes - External zinc coating - Part 2: Zinc rich paint with finishing layer |
![]() |
|
![]() |
GB/T 21636-2008 微束分析 电子探针显微分析 (EPMA) 术语(中英文版) Microbeam analysis - Electron Probe Micro Analysis (EPMA) - Vocabulary |
![]() |
|
![]() |
GB/T 9537-1988 电子设备用键盘开关 第一部分:总规范 (可供认证用)(中英文版) Keyboard switches foruse in electronic equipment--Part 1:Generic specification |
![]() |
|
![]() |
GB/T 17235.1-1998 信息技术 连续色调静态图像的数字压缩及编码 第1部分:要求和指南(中英文版) Information technology--Digital compression and coding of continuous-tone still images--Part 1:Requirements and guidelines |
![]() |
|
![]() |
GB/T 31500-2015 信息安全技术 存储介质数据恢复服务要求(中英文版) Information security technology—Requirement of data recovery service for storage media |
![]() |
|
![]() |
GB/T 23711.7-2019 塑料衬里压力容器试验方法 第7部分:泄漏试验(中英文版) Test method for pressure vessels lined with plastics—Part 7:Leakage testing |
![]() |
|
![]() |
GB/T 3810.8-2006 陶瓷砖试验方法 第8部分:线性热膨胀的测定(中英文版) Test methods of ceramic tiles Part 8: Determination of linear thermal expansion |
![]() |
|
![]() |
GB 11417.2-2012 眼科光学 接触镜 第2部分:硬性接触镜(中英文版) Ophthalmic optics - Contact lenses - Part 2: Rigid contact lenses specification |
![]() |
|
![]() |
GB/T 34691.1-2018 塑料-热塑性聚酯(TP)模塑和挤出材料-第1部分:命名系统和分类基础(中英文版) Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 1:Designation system and basis for specifications |
![]() |
|
![]() |
GB/T 43418-2023 亚麻纤维组成成分的检测方法(中英文版) Method for testing the composition of flax fiber |
![]() |
|
![]() |
GB/T 24688-2009 动物防疫消毒机 试验方法(中英文版) Equipment for animal disinfection machinery - Test methods |
![]() |
|
![]() |
GB/T 18949-2003 橡胶和塑料软管 动态条件下耐臭氧性能的评定(中英文版) Rubber and plastics hoses--Assessment of ozone resistance under dynamic conditions |
![]() |
|
![]() |
GB/T 34940.1-2017 静态切换系统(STS) 第1部分:总则和安全要求(中英文版) Static transfer systems(STS)—Part 1: General and safety requirements |
![]() |
|
![]() |
GB/T 42158-2023 微机电系统(MEMS)技术 微沟槽和棱锥式针结构的描述和测量方法(中英文版) Micro-Electro-Mechanical Systems (MEMS) Technology-Description and Measurement Methods of Micro-grooves and Pyramidal Needle Structures |
![]() |
|
![]() |
GB/T 27797.11-2011 纤维增强塑料 试验板制备方法 第11部分:BMC和其他长纤维模塑料注射模塑 小方片(中英文版) Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates |
![]() |
|
![]() |
GB/T 15843.4-2008 信息技术 安全技术 实体鉴别 第4部分: 采用密码校验函数的机制(中英文版) Information technology - Security techniques - Entity authentication - Part 4:Mechanisms using a cryptographic check function |
![]() |
|
![]() |
GB/T 33592-2017 分布式电源并网运行控制规范(中英文版) Specification of operation and controlling for distributed resources connected to power grid |
![]() |
|
![]() |
GB/T 13789-2022 用单片测试仪测量电工钢带(片)磁性能的方法(中英文版) Method for Measuring Magnetic Properties of Electrical Steel Strip (Sheet) with Single Chip Tester |
![]() |
|
![]() |
GB/T 15794-2009 稻飞虱测报调查规范(中英文版) Rules of investigation and forecast for the rice planthopper(Nilaparvata lugens stal and sogatalla furcifera horvath) |
![]() |
|
![]() |
GB/T 12984-1991 人类工效学 视觉信息作业基本术语(中英文版) Ergonomics--Basic terms for visual information processing |
![]() |
|
![]() |
GB/T 19659.4-2006 工业自动化系统与集成 开放系统应用集成框架 第4部分:基于以太网控制系统的参考描述(中英文版) Industrial automation systems and integration - Open systems application integration framework - Part 4: Reference description for Ethernet-based control systems |
![]() |
|
![]() |
GB/T 30910-2014 胶鞋 2-巯基苯并噻唑、二硫化二苯并噻唑迁移量的测定(中英文版) Rubber shoes—Determination of migration of 2-Mercaptobenzothiazole and 2,2’-Dithiobis(benzothiazole) |
![]() |
|
![]() |
GB 1886.212-2016 食品安全国家标准 食品添加剂 酪蛋白酸钠(又名酪朊酸钠)(中英文版) National Food Safety Standard - Food Additives - Casein sodium (also known as casein sodium) |
![]() |
|
![]() |
GB/T 40859-2021 流式数据监测控制图(中英文版) Control chart for streaming data monitoring |
![]() |
|
![]() |
GB/T 26242-2010 信息技术 九针点阵式打印机芯通用规范(中英文版) Information technology - General specification of 9-pin dot matrix printer cores |
![]() |
|
![]() |
GB 13318-2003 锻造生产安全与环保通则(中英文版) General rules for safety and environmental conservation of forging production |
![]() |
|
![]() |
GB/T 31932-2015 厚钢板电磁超声自动检测方法(中英文版) Method for electromagnetic automatic ultrasonic testing for thicker steel plates |
![]() |
|
![]() |
GB/T 39328-2020 增材制造 塑料材料挤出成形工艺规范(中英文版) Additive manufacturing—Specification for material extrusion process of plastic materials |
![]() |
|
![]() |
GB/T 29581-2013 胡椒叶斑病菌检疫鉴定方法(中英文版) Detection and identification of Xanthomonas axonopodis pv. Betlicola ( Patel et al. ) Vauterin et al. |
![]() |
|
![]() |
GB/T 22341.2-2008 冲天炉 第2部分:技术条件(中英文版) Cupola - Part 2: Technical requirements |
![]() |
|
![]() |
GB/T 37303.1-2019 船舶和海上技术 船舶操纵性 第1部分:基本概念、量与试验条件(中英文版) Ships and marine technology—Manoeuvring of ships—Part 1:General concepts, quantities and test conditions |
![]() |
|
![]() |
GB/T 43794-2024 用户供电可靠性评价指标导则(中英文版) Evaporative cooling fans |
![]() |
|
![]() |
GB 50524-2010 红外线同声传译系统工程技术规范(中英文版) Technical code for infrared simultaneous interpretation system |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [205] [206] [207] [208] [209] [210] [211] |