中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 33330-2016 锦纶6浸胶帘子布技术条件和评价方法(中英文版) Polyamide 6 dipped cord fabric technical requirements and evaluation methods |
![]() |
|
![]() |
GB/T 12818-2021 铁路客车组装后的检查与试验规则(中英文版) Rules for inspecting and testing of railway passenger car after completion of construction |
![]() |
|
![]() |
GB/T 14645-2014 纺织品 燃烧性能 45°方向损毁面积和接焰次数的测定(中英文版) Textiles―Burning behaviour―The 45°test determination of damaged area and ignition times |
![]() |
|
![]() |
GB 50416-2007 煤矿井底车场硐室设计规范(中英文版) Code for design of chambers around pit-bottom of coal mine |
![]() |
|
![]() |
GB/T 16886.7-2015 医疗器械生物学评价 第7部分:环氧乙烷灭菌残留量(中英文版) Biological evaluation of medical devices—Part 7: Ethylene oxide sterilization residuals |
![]() |
|
![]() |
GB 50677-2011 空分制氧设备安装工程施工与质量验收规范(中英文版) Code for construction and acceptance of oxygen plant equipment installation engineering |
![]() |
|
![]() |
GB/T 5782-2000 六角头螺栓(中英文版) Hexagon head bolts |
![]() |
|
![]() |
GB/T 5137.1-2020 汽车安全玻璃试验方法 第1部分:力学性能试验(中英文版) Test methods of safety glazing materials used on road vehicles—Part 1: Mechanical properties tests |
![]() |
|
![]() |
GB/T 5915-2008 仔猪、生长肥育猪配合饲料(中英文版) Formula feeds for starter and growing-finishing pigs |
![]() |
|
![]() |
GB/T 13725-2019 建立术语数据库的一般原则与方法(中英文版) General principles and methods for establishing terminology database |
![]() |
|
![]() |
GB/T 29814-2013 在线分析器系统的设计和安装指南(中英文版) On-line analyser systems - Guide to design and installation |
![]() |
|
![]() |
GB-16994.6-2024 港口作业安全要求-第6部分:固体散装危险货物(中英文版) Safety requirements for port operations-Part 6: Solid bulk dangerous goods |
![]() |
|
![]() |
GB/T 25033-2010 再生沥青混凝土(中英文版) Recycling asphalt concrete |
![]() |
|
![]() |
GB/T 36564-2018 煤基费托合成 汽油组分油(中英文版) Coal-based Fischer-Tropsch synthesis—Gasoline component oil |
![]() |
|
![]() |
GB/T 43072-2023 气瓶追溯体系建设实施指南(中英文版) Implementation Guide for the Construction of Gas Cylinder Traceability System |
![]() |
|
![]() |
GB 4793.8-2008 测量、控制和试验室用电气设备的安全要求 第2-042部分:使用有毒气体处理医用材料及供试验室用的压力灭菌器和灭菌器的专用要求(中英文版) Safety requirements for electrical equipment for measurement,control,and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials,and for laboratory processes |
![]() |
|
![]() |
GB/T 34333-2017 耐火材料 电感耦合等离子体原子发射光谱(ICP-AES)分析方法(中英文版) Refractory products—Determination by inductively coupled plasma atomic emission spectrometry(ICP-AES) |
![]() |
|
![]() |
GB/T 28624-2012 组织机构代码数字档案管理与技术规范(中英文版) Management and technical specification for digital archives of organization code registration |
![]() |
|
![]() |
GB/T 12224-2005 钢制阀门 一般要求(中英文版) General requirements for industrial steel valves |
![]() |
|
![]() |
GB 18580-2001 室内装饰装修材料 人造板及其制品中甲醛释放限量(中英文版) Indoor decorating and refurbishing materials--Limit of formaldehyde emission of wood-based panels and finishing products |
![]() |
|
![]() |
GB/T 41240-2022 户用光储一体机测试(中英文版) Test of household hybrid photovoltaic and storage converter |
![]() |
|
![]() |
GB/T 23784-2009 食品微生物指标制定和应用的原则(中英文版) Principles for the establishment and application of microbiological criteria for foods |
![]() |
|
![]() |
GB/T 35117-2017 制造过程物联功能体系结构(中英文版) Function architecture for internet of things in manufacturing processes |
![]() |
|
![]() |
GB/T 31838.6-2021 固体绝缘材料 介电和电阻特性 第6部分:介电特性(AC方法) 相对介电常数和介质损耗因数(频率0.1Hz~10MHz)(中英文版) Solid insulating materials—Dielectric and resistive properties—Part 6:Dielectric properties(AC method)—Relative permittivity and dielectric dissipation factor(frequencies 0.1Hz~10 MHz) |
![]() |
|
![]() |
GB 3836.8-2014 爆炸性环境 第8部分: 由“n”型保护的设备(中英文版) Explosive atmospheres―Part 8: Equipment protection by type of protection “n” |
![]() |
|
![]() |
GB/T 32556.3-2016 带端键传动的铣刀杆 第3部分:带法兰接触面的空心锥柄的铣刀杆尺寸(中英文版) Cutter arbors with tenon drive—Part 3: Dimensions of hollow taper interface with flange contact surface |
![]() |
|
![]() |
GB/T 14598.11-2011 量度继电器和保护装置 第11部分:辅助电源端口电压暂降、短时中断、电压变化和纹波(中英文版) Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port |
![]() |
|
![]() |
GB/T 3044-2020 白刚玉、铬刚玉化学分析方法(中英文版) Chemical analysis methods for white fused alumina and pink fused alumina |
![]() |
|
![]() |
GB/T 8081-2008 天然生胶 技术分级橡胶(TSR)规格导则(中英文版) Rubber, raw natural - Guidelines for the specification of technically specified rubber(TSR) |
![]() |
|
![]() |
GB 16895.29-2008 建筑物电气装置 第7-713部分:特殊装置或场所的要求 家具(中英文版) Electrical installations of buildings - Part 7-713: Requirements for special installations and locations - Furniture |
![]() |
|
![]() |
GB/T 38347-2019 超低碳高硼钢热轧盘条(中英文版) Hot-rolled wire rod of ultra-low carbon steel with high boron |
![]() |
|
![]() |
GB/T 30086-2013 给水塑料管道轴向线膨胀系数试验方法(中英文版) Determination of axial coefficient of linear expansion of plastics pipes for water supply |
![]() |
|
![]() |
GB 15740-2006 汽车防盗装置(中英文版) Protective devices against unauthorized use of motor vehicles |
![]() |
|
![]() |
GB/T 18939.1-2003 微波炉电容器 第1部分:总则(中英文版) Capacitors for microwave ovens--Part 1:General |
![]() |
|
![]() |
GB 50629-2010 板带轧钢工艺设计规范(中英文版) Code for design of rolling process for plate and strip mill |
![]() |
|
![]() |
GB/T 25606-2010/XG1-2018 《土方机械-产品识别代码系统》国家标准第1号修改单(中英文版) Earth-moving machinery - Product identification numbering system |
![]() |
|
![]() |
GB/T 43386-2023 用于支撑使用者的个人卫生辅助器具 要求和试验方法(中英文版) Personal hygiene aids intended to support the user Requirements and test methods |
![]() |
|
![]() |
GB/T 34851-2017 文房四宝 墨汁(中英文版) Chinese traditional stationery—Chinese ink |
![]() |
|
![]() |
GB/T 28875-2012 空间科学实验 生物样品要求(中英文版) Space science experiment - Requirement for biological samples |
![]() |
|
![]() |
GB/T 6346.14-2023 电子设备用固定电容器 第14部分:分规范 抑制电源电磁干扰用固定电容器(中英文版) Fixed capacitors for electronic equipment - Part 14: Sectional specification Fixed capacitors for suppressing electromagnetic interference in power supplies |
![]() |
|
![]() |
GB/T 16773-2008 煤岩分析样品制备方法(中英文版) Method of preparing coal samples for the coal petrographic analysis |
![]() |
|
![]() |
GB/T 7016-1986 固定电阻器电流噪声测量方法(中英文版) Method of measurement of current noise generated in fixed resistors |
![]() |
|
![]() |
GB/T 24109-2009 数控雕铣机(中英文版) CNC engraving and milling machine |
![]() |
|
![]() |
GB/T 35494.1-2017 各向同性导电胶粘剂试验方法 第1部分:通用方法(中英文版) Test methods for isotropic electrically conductive adhesives—Part 1:General test methods |
![]() |
|
![]() |
GB/T 40457-2021 咖啡浆果炭疽病菌检疫鉴定方法(中英文版) Detection and identification of Colletotrichum kahawae J.M. Waller & Bridge |
![]() |
|
![]() |
GB/T 15731-2015 内河旅游船星级的划分与评定(中英文版) Star-rating standard for river cruises |
![]() |
|
![]() |
GB/T 14805.5-2007 行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号:4,语法发布号:1) 第5部分: 批式电子数据交换安全规则(真实性、完整性和源抗抵赖性)(中英文版) Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4,Syntax release number:1) - Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of |
![]() |
|
![]() |
GB 11673-2003 含乳饮料卫生标准(中英文版) Hygienic standard for milk beverage |
![]() |
|
![]() |
GB/T 32718-2016 棉花 噻苯隆残留量测定方法(中英文版) Cotton—Detemination of thidiazuron |
![]() |
|
![]() |
GB/T 26817-2011 企业信用调查报告格式规范 基本信息报告、普通调查报告、深度调查报告(中英文版) Specification of business credit information reports - Basic credit information report, standard report, indepth report |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [234] [235] [236] [237] [238] [239] [240] |