中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 14598.118-2021 量度继电器和保护装置 第118部分:电力系统同步相量 测量(中英文版) Measuring relays and protection equipment -- Part 118: Synchrophasor for power systems -- Measurements |
![]() |
|
![]() |
GB/T 3654.10-1983 铌铁化学分析方法 EDTA容量法测定铝量(中英文版) Methods for chemical analysis of ferroniobium--The EDTA volumetric method for the determination of aluminium content |
![]() |
|
![]() |
GB/T 23683-2009 制冷剂毛细管流量的试验方法(中英文版) Method of testing flow capacity of refrigerant capillary tubes |
![]() |
|
![]() |
GB/T 6730.49-1986 铁矿石化学分析方法 原子吸收分光光度法测定钠和钾量(中英文版) Methods for chemical analysis of iron ores--The flame atomic absorption spectrophotometric method for the determination of sodium and potassium content |
![]() |
|
![]() |
GB/T 32241-2015 植物保护机械 喷雾飘移的实验室测量方法 风洞试验(中英文版) Equipment for crop protection—Methods for the laboratory measurement of spray drift—Wind tunnels |
![]() |
|
![]() |
GB/T 31169-2014 滑雪运动装备使用要求(中英文版) Requirements for use of skiing equipment |
![]() |
|
![]() |
GB/T 14229-1993 齿轮接触疲劳强度试验方法(中英文版) Standard of test method for surface load capacity of gears |
![]() |
|
![]() |
GB/T 12706.2-2020 额定电压1 kV(Um=1.2 kV)到35 kV(Um=40.5 kV)挤包绝缘电力电缆及附件 第2部分:额定电压6 kV(Um=7.2kV)到30 kV(Um=36 kV)电缆(中英文版) Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um=1.2 kV) up to 35 kV (Um=40.5 kV)—Part 2: Cables for rated voltages from 6 kV(Um=7.2 kV) up to 30 kV(Um=36 kV) |
![]() |
|
![]() |
GB/T 12331-1990 有毒作业分级(中英文版) Classified standard of operation with exposure to toxic chemicals in the workplace |
![]() |
|
![]() |
GB/T 12967.7-2010 铝及铝合金阳极氧化膜检测方法 第7部分:用落砂试验仪测定阳极氧化膜的耐磨性(中英文版) Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 7:Measurement of abrasion resistance of anodicoxidation coatings by sand falling test apparatus |
![]() |
|
![]() |
GB/T 12971.1-2008 电力牵引用接触线 第1部分: 铜及铜合金接触线(中英文版) Trolley and contact wires for electric traction - Part 1: Copper and copper-alloy contact wires |
![]() |
|
![]() |
GB/T 36463.2-2019 信息技术服务 咨询设计 第2部分:规划设计指南(中英文版) Information technology service—Consulting and design—Part 2:Guidance for planning and design |
![]() |
|
![]() |
GB/T 9350-2003 塑料 氯乙烯均聚和共聚树脂水萃取液pH值的测定(中英文版) Plastics--Homopolymer andcopolymer resins of vinyl chloride--Determination of pH of aqueous extract |
![]() |
|
![]() |
GB/T 44042-2024 船舶水下辐射噪声测量方法(中英文版) Method for measuring underwater radiated noise of ships |
![]() |
|
![]() |
GB/T 4200-2008 高温作业分级(中英文版) Classified standard of working in the hot environment |
![]() |
|
![]() |
GB 20890-2007 重型汽车排气污染物排放控制系统耐久性要求及试验方法(中英文版) Test procedures and requirement of durability of emission control systems for heavy-duty vehicles |
![]() |
|
![]() |
GB/T 29792-2013 静电复印(打印)设备用显影磁辊(中英文版) Developing magnetic roller for electrostatic copying(printing) device |
![]() |
|
![]() |
GB/T 36368-2018 业务需求规范 跨行业发票开具过程(中英文版) Business requirements specification—Cross industry invoicing process |
![]() |
|
![]() |
GB/T 3883.402-2023 手持式、可移式电动工具和园林工具的安全 第402部分:修枝剪的专用要求(中英文版) Safety of hand-held and portable power tools and garden tools Part 402: Particular requirements for pruning shears |
![]() |
|
![]() |
GB/T 25019-2010 船用三氟甲烷灭火装置(中英文版) Trifluoromethane fire extinguishing equipment for ship |
![]() |
|
![]() |
GB/T 21958-2017 轮式拖拉机 前驱动桥(中英文版) Wheeled tractor—Front drive axle |
![]() |
|
![]() |
GB 15081-1994 玻璃工厂工业卫生与安全技术规程(中英文版) The specification for industrial healthand safety technology in glass factory |
![]() |
|
![]() |
GB/T 41274-2022 可编程控制系统内生安全体系架构(中英文版) Programmable Control System Endogenous Safety Architecture |
![]() |
|
![]() |
GB/T 28550-2012 核电厂调试阶段管道验证要求(中英文版) Piping verification requirement during nuclear power plant commissioning |
![]() |
|
![]() |
GB 18583-2008 室内装饰装修材料 胶粘剂中有害物质限量(中英文版) Indoor decorating and refurbishing materials - Limit of harmful substances of adhesives |
![]() |
|
![]() |
GB/T 35486-2017 物流仓储配送中心螺旋箱式输送机技术规范(中英文版) Specification of spiral-conveyer for logistics warehousing distribution center |
![]() |
|
![]() |
GB/T 19216.1-2021 在火焰条件下电缆或光缆的线路完整性试验 第1部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法(中英文版) Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed |
![]() |
|
![]() |
GB/T 1634.2-2004 塑料 负荷变形温度的测定 第2部分:塑料、硬橡胶和长纤维增强复合材料(中英文版) Plastics--Determination of temperature of deflection under load--Part 2:Plastics,ebonite and long-fibre-reinforced composites |
![]() |
|
![]() |
GB/T 17296-2009 中国土壤分类与代码(中英文版) Classification and codes for Chinese soil |
![]() |
|
![]() |
GB/T 21440.1-2008 大坝监测仪器 沉降仪 第1部分:水管式沉降仪(中英文版) Instument for dam monitoring settlement gauge - Part 1: Hydraulic overflow settlement gauge |
![]() |
|
![]() |
GB/T 1443-2016 机床和工具柄用自夹圆锥(中英文版) Self-holding tapers for machine tools and tool shanks |
![]() |
|
![]() |
GB/T 30269.301-2014 信息技术 传感器网络 第301部分:通信与信息交换:低速无线传感器网络网络层和应用支持子层规范(中英文版) Information technology—Sensor networks—Part 301:Communication and information exchange: Network layer and application support sublayer technical specifications for low-rate wireless sensor networks |
![]() |
|
![]() |
GB/T 39028-2020 纺织机械与附件 罗拉式梳理成网机 术语和定义(中英文版) Textile machinery and accessories—Web roller cards—Terms and definitions |
![]() |
|
![]() |
GB/T 2900.22-2005 电工名词术语 电焊机(中英文版) Electrotechnical terminology Electric welding machine |
![]() |
|
![]() |
GB/T 1479.1-2011 金属粉末 松装密度的测定 第1部分:漏斗法(中英文版) Metallic powders - Determination of apparent density - Part 1: funnal method |
![]() |
|
![]() |
GB/T 20899.3-2019 金矿石化学分析方法 第3部分:砷量的测定(中英文版) Methods for chemical analysis of gold ores—Part 3:Determination of arsenic content |
![]() |
|
![]() |
GB/T 8059.3-1995 家用制冷器具 冷冻箱(中英文版) Household refrigerating appliances--Freezers |
![]() |
|
![]() |
GB/T 13546-1992 挑选型计数抽样检查程序及抽样表(中英文版) Rectifying sampling procedures and tables for inspections by attributes |
![]() |
|
![]() |
GB/T 5009.146-2008 植物性食品中有机氯和拟除虫菊酯类农药多种残留量的测定(中英文版) Determination of organochlorines and pyrethroid pesticide multiresidues in vegetable foods |
![]() |
|
![]() |
GB/T 11064.7-2013 碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第7部分:铁量的测定 邻二氮杂菲分光光度法(中英文版) Methods for chemical analysis of lithium carbonate,lithium hydroxide monohydrate and lithium chloride - Part 7: Determination of iron content-1,10-phenanthroline spectrophotometric method |
![]() |
|
![]() |
GB/T 36218-2018 船舶生产企业主要耗能设备管理要求(中英文版) Management requirements of main energy consumption equipment for shipbuilding enterprises |
![]() |
|
![]() |
GB/T 43326.4-2023 抛雪机 安全要求和试验方法 第4部分:国家和地区的附加要求(中英文版) Snow blowers - Safety requirements and test methods - Part 4: Additional national and regional requirements |
![]() |
|
![]() |
GB/T 25151.3-2010 尿素高压设备制造检验方法 第3部分:尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验(中英文版) Fabrication and inspection method for high pressure urea equipment - Part 3: Intergranular corrosion tendency test for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade |
![]() |
|
![]() |
GB/T 21984-2008 短期天气预报(中英文版) Short-range weather forecast |
![]() |
|
![]() |
GB/T 18636-2017 蓝舌病诊断技术(中英文版) Diagnostic techniques for bluetongue |
![]() |
|
![]() |
GB/T 1115-2022 圆柱形铣刀(中英文版) Cylindrical milling cutter |
![]() |
|
![]() |
GB/T 5195.6-2006 萤石 磷含量的测定(中英文版) Fluorspar―Determination of phosphorus content |
![]() |
|
![]() |
GB/T 17900-1999 网络代理服务器的安全 技术要求(中英文版) Security requirements for proxy server |
![]() |
|
![]() |
GB/T 28923.2-2012 自然灾害遥感专题图产品制作要求 第2部分:监测专题图产品(中英文版) Mapping requirements for the natural disasters remote sensing thematic maps - Part 2: Monitoring thematic maps |
![]() |
|
![]() |
GB/T 35308-2017 太阳能电池用锗基Ⅲ-Ⅴ族化合物外延片(中英文版) Epitaxial wafers of germanium based Ⅲ-Ⅴcompounds for solar cell |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [305] [306] [307] [308] [309] [310] [311] |