中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 22091.1-2008 55°密封管螺纹量规 第1部分:用于检验圆柱内螺纹与圆锥外螺纹(中英文版) Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads - Part 1:Verification of parallel internal and taper external threads |
![]() |
|
![]() |
GB/T 34154-2017 井冈霉素可溶粉剂(中英文版) Jingangmycin A water soluble powders |
![]() |
|
![]() |
GB/T 26953-2011 焊缝无损检测 焊缝渗透检测 验收等级(中英文版) Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels |
![]() |
|
![]() |
GB/T 20899.8-2022 金矿石化学分析方法 第8部分:硫量的测定(中英文版) Methods for chemical analysis of gold ores - Part 8: Determination of sulfur content |
![]() |
|
![]() |
GB/T 20754-2006 畜禽肉中保泰松残留量的测定 液相色谱-紫外检测法(中英文版) Method for the determination of phenylbutazone in livestock and poultry muscles - LC-UV detection method |
![]() |
|
![]() |
GB/T 5169.25-2008 电工电子产品着火危险试验 第25部分:烟模糊 总则(中英文版) Fire hazard testing for electric and electronic products - Part 25: Smoke obscuration - General guidance |
![]() |
|
![]() |
GB/T 35139-2017 光合有效辐射表(中英文版) Photosynthetic active radiometer |
![]() |
|
![]() |
GB/T 17191.1-1997 信息技术 具有1.5Mbit/s 数据传输率的数字存储媒体运动图像及其伴音的编码 第1部分:系统(中英文版) Information technology--Coding of moving pictures and associatedaudio for digital storage media at up to about 1.5Mbit/s--Part 1:Systems |
![]() |
|
![]() |
GB/T 16930.2-2021 盲杖 第2部分:性能要求和试验方法(中英文版) Tactile sticks -- Part 2: Performance requirements and test methods |
![]() |
|
![]() |
GB/T 30246.11-2013 家庭网络 第11部分:控制网络接口一致性测试规范(中英文版) Home network―Part 11:Specification for conformance test of interfaces in control network |
![]() |
|
![]() |
GB/T 4661-2015 滚动轴承 圆柱滚子(中英文版) Rolling bearings—Cylindrical rollers |
![]() |
|
![]() |
GB/T 25480-2010 仪器仪表运输、贮存基本环境条件及试验方法(中英文版) Basic environmental conditions and testing methods for transportation and storage of instruments |
![]() |
|
![]() |
GB 18613-2020 电动机能效限定值及能效等级(中英文版) Minimum allowable values of energy efficiency and values of efficiency grades for motors |
![]() |
|
![]() |
GB/T 5009.184-2003 粮食、蔬菜中噻嗪酮残留量的测定(中英文版) Determination of buprofezin in cereals and vegetables |
![]() |
|
![]() |
GB/T 22329-2008 牛皮蝇蛆病诊断技术(中英文版) Diagnostic techniques for bovine hypodermosis |
![]() |
|
![]() |
GB/T 37886-2019 气瓶射频识别(RFID)读写设备技术规范(中英文版) Technical requirements for RFID read-write equipment of gas cylinder |
![]() |
|
![]() |
GB/T 29244-2012 信息安全技术 办公设备基本安全要求(中英文版) Information security technology - Basic security requirements for office devices |
![]() |
|
![]() |
GB/T 10799-2008 硬质泡沫塑料 开孔和闭孔体积百分率的测定(中英文版) Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells |
![]() |
|
![]() |
GB/T 24423-2009 信息与文献 文献用纸 耐久性要求(中英文版) Information and documentation - Paper for documents - Requirements for permanence |
![]() |
|
![]() |
GB/T 35021-2018 增材制造 工艺分类及原材料(中英文版) Additive manufacturing—Process categories and feedstock |
![]() |
|
![]() |
GB 43069-2023 矿用电缆安全技术要求(中英文版) Safety technical requirements for mining cables |
![]() |
|
![]() |
GB/T 19816.3-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定(中英文版) Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness |
![]() |
|
![]() |
GB/T 34525-2017 气瓶搬运、装卸、储存和使用安全规定(中英文版) Safety rules for handling, loading and unloading, storing and using of cylinder |
![]() |
|
![]() |
GB/T 27915-2011 组合式塑料托盘(中英文版) Assembled plastic pallet |
![]() |
|
![]() |
GB/T 29829-2022 信息安全技术 可信计算密码支撑平台功能与接口规范(中英文版) Information security technology trusted computing cryptographic support platform function and interface specification |
![]() |
|
![]() |
GB/T 5655-1985 城市公共交通常用名词术语(中英文版) Common terms of urban public transport |
![]() |
|
![]() |
GB 11720-1989 车间空气中敌百虫卫生标准(中英文版) Health standard for trichlorfon in the air ofworkplace |
![]() |
|
![]() |
GB/T 4211.2-2004 高速钢车刀条 第2部分:技术条件(中英文版) High speed steel tool bits--Part 2:Technical requirements |
![]() |
|
![]() |
GB 22998-2008 机床安全 大规格数控车床与车削中心(中英文版) Safety of machine tools - Large numerically controlled turning machines and turning centres |
![]() |
|
![]() |
GB/T 16895.20-2017 低压电气装置第 5-55 部分:电气设备的选择和安装 其他设备(中英文版) Low-voltage electrical installations—Part 5-55:Selection and erection of electrical equipment—Other equipment |
![]() |
|
![]() |
GB/T 27926.8-2021 金融服务 金融业通用报文方案 第8部分:ASN.1生成(中英文版) Financial services—Universal financial industry message scheme—Part 8:ASN.1 generation |
![]() |
|
![]() |
GB/T 30420.1-2013 缝纫机术语 第1部分:基础术语(中英文版) Sewing machine terminology—Part 1: Basic terminology |
![]() |
|
![]() |
GB/T 3780.8-2008 炭黑 第8部分:加热减量的测定(中英文版) Carbon black - Part 8:Determination of heating loss |
![]() |
|
![]() |
GB/T 5273-2016 高压电器端子尺寸标准化(中英文版) Dimensional standardisation of terminals for high-voltage apparatus |
![]() |
|
![]() |
GB/T 14999.7-2010 高温合金铸件晶粒度、一次枝晶间距和显微疏松测定方法(中英文版) Test methods for grain sizes,primary dendrite spacing and microshrinkage of superalloy castings |
![]() |
|
![]() |
GB/T 39551.7-2020 专利导航指南 第7部分:服务要求(中英文版) Patent navigation guide—Part 7:Service requirement |
![]() |
|
![]() |
GB/T 12618.5-2006 开口型平圆头抽芯铆钉 20、21、22级(中英文版) Open end blind rivets with break pull mandrel and protruding head―property class 20,21 22 |
![]() |
|
![]() |
GB/T 31569-2015 六轴联动数控螺旋锥齿轮铣齿机 精度检验(中英文版) 6-axis simultaneous CNC spiral bevel gear milling machines—Testing of the accuracy |
![]() |
|
![]() |
GB/T 38256-2019 多光路光轴平行性测试方法(中英文版) Test method for optical axis parallelism of multiple optical paths |
![]() |
|
![]() |
GB/T 29476-2012 移动实验室仪器设备通用技术规范(中英文版) General technical specification for mobile laboratory instruments and equipments |
![]() |
|
![]() |
GB/T 24566-2009 整流设备节能监测(中英文版) Monitoring and testing for energy saving of power convertor equipments |
![]() |
|
![]() |
GB 51321-2018 电子工业厂房综合自动化工程技术标准(中英文版) Electronic industrial plant integrated automation engineering technical standards |
![]() |
|
![]() |
GB/Z 43444.1-2023 智能设备管理 第1部分:概念和定义(中英文版) Smart Device Management Part 1: Concepts and Definitions |
![]() |
|
![]() |
GB/T 5023.7-2008 额定电压450/750V及以下聚氯乙烯绝缘电缆 第7部分:二芯或多芯屏蔽和非屏蔽软电缆(中英文版) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 7:Flexible cables screened and unscreened with two or more conductors |
![]() |
|
![]() |
GB/T 34690.8-2017 印刷技术 胶印数字化过程控制 第8部分:胶印设备(中英文版) Graphic technology—Digitalized process control for offset printing—Part 8: Offset press |
![]() |
|
![]() |
GB/T 27866-2011 控制钢制管道和设备焊缝硬度防止硫化物应力开裂技术规范(中英文版) Specification of controlling weld hardness of carbon steel and low alloy steel piping and equipment to prevent sulfide stress cracking |
![]() |
|
![]() |
GB/T 42319-2023 船舶和海上技术 航行数据记录仪(VDR)操作和安装指南(中英文版) Ships and offshore technology - Guidelines for the operation and installation of voyage data recorders (VDR) |
![]() |
|
![]() |
GB/T 17782-1999 硫化橡胶压力空气热老化试验方法(中英文版) Rubber,vulcanized--Test method of aging by heat and air pressure |
![]() |
|
![]() |
GB/T 20931.1-2007 锂化学分析方法 钾量的测定 火焰原子吸收光谱法(中英文版) Methods for chemical analysis of lithium - Determination of potassium content - Flame atomic absorption spectrometric method |
![]() |
|
![]() |
GB/T 3784-2009 电工术语 雷达(中英文版) Electrotechnical terminology - Radar |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [323] [324] [325] [326] [327] [328] [329] |