中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 5009.145-2003 植物性食品中有机磷和氨基甲酸酯类农药多种残留的测定(中英文版) Determination of organophosphorus and carbamate pesticide multiresidues in vegetable foods |
|||
GB/T 12580-1990 加抑制剂矿物绝缘油氧化安定性测定法(中英文版) Inhibited mineral insulating oils--Determination of oxidation stability |
|||
GB/T 1819.13-2017 锡精矿化学分析方法 第13部分:氧化镁、氧化钙量的测定 火焰原子吸收光谱法(中英文版) Methods for chemical analysis of tin concentrates—Part 13: Determination of magnesium oxide content,calcium oxide content—Flame atomic absorption spectrometric method |
|||
GB/T 15690-2008 植物油料 含油量测定 连续波低分辨率核磁共振测定法(快速法)(中英文版) Oilseeds - Determination of oil content - Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry(Rapid method) |
|||
GB/T 21093-2007 高压汞灯 性能要求(中英文版) High-pressure mercury vapour lamps - Performance specifications |
|||
GB/T 41241-2022 核电厂工业控制系统网络安全管理要求(中英文版) Nuclear power plant industrial control system network security management requirements |
|||
GB 50929-2013 氨纶工厂设计规范(中英文版) Code for design of spandex plant |
|||
GB/T 35477-2017 超硬磨料 人造金刚石微粉(中英文版) Superabrasive—Synthetic diamond micropowders |
|||
GB/T 40169-2021 超高分子量聚乙烯(PE-UHMW)和高密度聚乙烯(PE-HD)模塑板材(中英文版) Compression-moulded plates of ultra-high-molecular-weight polyethylene(PE-UHMW)and high density polyethylene (PE-HD) |
|||
GB/T 25093-2010 高压直流系统交流滤波器(中英文版) AC filters for HVDC systems |
|||
GB/T 10283-2016 林业机械 便携式风力灭火机 振动的测定(中英文版) Forestry machinery—Portable pneumatic fire extinguisher—Measurement of vibration |
|||
GB/T 39040-2020 包装用钢质锁扣及护角(中英文版) Steel seals and edge protectors for packing |
|||
GB/T 9292-2012 表面活性剂 高温条件下分散染料染聚酯织物用匀染剂的移染性测试法(中英文版) Surface active agents method of testing of the migration action of levelling agents for disperse dyes on dyeing polyester textiles under high temperature condition |
|||
GB/T 17980.119-2004 农药 田间药效试验准则(二) 第119部分:杀菌剂防治草莓白粉病(中英文版) Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 119:Fungicides against powdery mildew of strawberry |
|||
GB/T 18246-2019 饲料中氨基酸的测定(中英文版) Determination of amino acids in feeds |
|||
GB/T 14712-2009 单层热压机(中英文版) Single-opening hot press |
|||
GB/T 2861.1-2008 冲模导向装置 第1部分:滑动导向导柱(中英文版) Guide unit for stamping dies - Part 1: Guide pillars for sliding guide |
|||
GB/T 7991.9-2014 搪玻璃层试验方法 第9部分:抗拉强度的测定(中英文版) Test method of vitreous and porcelain enamels―Part 9: Determination of adhesion tensile strength |
|||
GB/T 20067-2006 粗直径钢丝绳(中英文版) Large diameter steel wire ropes |
|||
GB/T 36226-2018 不锈钢 锰、镍、铬、钼、铜和钛含量的测定 手持式能量色散X射线荧光光谱法(半定量法)(中英文版) Stainless steel—Determination of manganse, nickel, chromium, molybdenum, copper and titanium—Handheld energy dispersive X-Ray fluorescence spectrometric method (semiquantitative method) |
|||
GB/T 43320-2023 焊缝无损检测 超声检测 薄壁钢构件自动相控阵技术的应用(中英文版) Non-destructive testing of welds, ultrasonic testing, application of automatic phased array technology for thin-walled steel components |
|||
GB/T 26624-2011 畜禽养殖污水贮存设施设计要求(中英文版) Design specifications for wastewater storage facility of animal farm |
|||
GB/T 25802-2017 分散艳蓝E-4R(C.I.分散蓝56)(中英文版) Disperse brilliant blue E-4R(C.I. Disperse blue 56) |
|||
GB 50060-2008 3~110kV高压配电装置设计规范(中英文版) Code for design of 3~110kV high voltage electrical installations |
|||
GB/T 41653-2022 金属和合金的腐蚀 热处理铝合金晶间腐蚀敏感性阳极试验方法(中英文版) Corrosion of metals and alloys - Anodic test method for susceptibility to intergranular corrosion of heat-treated aluminum alloys |
|||
GB 29972-2013 食品安全国家标准 食品添加剂 乙醛二乙缩醛(中英文版) National Food Safety Standard Food Additive Identification Allyl disulfide Food Additive Identification Acetaldehyde diethyl acetal |
|||
GB/T 29618.62-2017 现场设备工具(FDT)接口规范 第62部分:现场设备工具(FDT)样式指南(中英文版) Field device tool (FDT) interface specification—Part 62: Field device tool (FDT) styleguide |
|||
GB/T 4958.17-1992 地面无线电接力系统所用设备的测量方法 第二部分:分系统的测量 第六节 分集、双路和热备用设备(中英文版) Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2:Measurements for sub-systems--Section six--Diversity,twin-path and hot stand-by equipment |
|||
GB/T 40313-2021 变形高温合金盘锻件(中英文版) Specification for wrought superalloy forging disks |
|||
GB/T 25189-2010 微束分析 扫描电镜能谱仪定量分析参数的测定方法(中英文版) Microbeam analysis - Determination method for quantitative analysis parameters of SEM-EDS |
|||
GB/T 2900.56-2008 电工术语 控制技术(中英文版) Electrotechnical terminology - Control technology |
|||
GB/T 28878.8-2016 空间科学实验转动部件规范 第8部分:装配(中英文版) Specification of the rotating component in space science experiments—Part 8:Assemble |
|||
GB/T 4169.16-2006 塑料注射模零件 第16部分: 带肩推杆(中英文版) Components of injection moulds for plastics - Part 16: Shouldered ejector pin |
|||
GB/T 40562-2021 电子设备用电位器 第6部分:分规范 表面安装预调电位器(中英文版) Potentiometers for use in electronic equipment—Part 6:Sectional specification—Surface mount preset potentiometers |
|||
GB/T 3108-1999 船体外加电流阴极保护系统(中英文版) Impressed current cathodic protection system for ship hull |
|||
GB/T 12274.1-2012 有质量评定的石英晶体振荡器 第1部分:总规范(中英文版) Quartz crystal controlled oscillators of assessed quality - Part 1: Generic specification |
|||
GB/T 10580-2015 固体绝缘材料在试验前和试验时采用的标准条件(中英文版) Standard conditions for use prior to and during the testing of solid electrical insulating materials |
|||
GB/T 39156-2020 大规格陶瓷板技术要求及试验方法(中英文版) Technical requirements and test methods for large format ceramic slab |
|||
GB/T 1303.7-2009 电气用热固性树脂工业硬质层压板 第7部分:聚酯树脂硬质层压板(中英文版) Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 7: Requirements for rigid laminated sheets based on polyester resins |
|||
GB/T 7964-1987 烧结金属材料(不包括硬质合金) 室温拉伸试验(中英文版) Sintered metal materials (excluding hardmetal)--Tension testing at room temperature |
|||
GB/T 31351-2014 碳化硅单晶抛光片微管密度无损检测方法(中英文版) Nondestructive test method for micropipe density of polished monocrystalline silicon carbide wafers |
|||
GB/T 36943-2018 电动自行车用锂离子蓄电池型号命名与标志要求(中英文版) Designation and marking requirements of lithium-ion batteries for electric bicycle |
|||
GB/T 37183-2023 腐蚀控制工程全生命周期 风险评估(中英文版) Corrosion control project life cycle risk assessment |
|||
GB 26788-2011 弹性式压力仪表通用安全规范(中英文版) The general safety regulations of elasticity pressure gauge |
|||
GB/T 16862-2008 鲜食葡萄冷藏技术(中英文版) Table grapes-guide to cold storage |
|||
GB/T 35809-2018 林业生物质原料分析方法 蛋白质含量测定(中英文版) Method for analysis of forestry biomass—Determination of protein content |
|||
GB/T 22817-2008 钢纸管(中英文版) Vulcanized paper core |
|||
GB/T 17248.6-2007 声学 机器和设备发射的噪声 声强法现场测定工作位置和其它指定位置发射声压级的工程法(中英文版) Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity |
|||
GB/T 42567.3-2023 工业过程测量变送器试验的参比条件和程序 第3部分:温度变送器的特定程序(中英文版) Reference conditions and procedures for testing transmitters for industrial process measurement Part 3: Specific procedures for temperature transmitters |
|||
GB/T 18286-2000 信息技术 文本通信用控制功能(中英文版) Information technology--Control functionsfor text communication |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [28] [29] [30] [31] [32] [33] [34] |