中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 19280-2003 流体输送用热塑性塑料管材 耐快速裂纹扩展(RCP)的测定 小尺寸稳态试验(S4试验)(中英文版) Thermoplastics pipes for the conveyance of fluids--Determination of resistance to rapid crack propagation (RCP)--Small-scale steady-state test(S4 test) |
![]() |
|
![]() |
GB/T 42860-2023 运载火箭运输通用要求(中英文版) General requirements for launch vehicle transportation |
![]() |
|
![]() |
GB/T 25145-2010 搅拌设备名词术语(中英文版) Terminology of agitating equipment |
![]() |
|
![]() |
GB/T 6113.201-2008 无线电骚扰和抗扰度测量设备和测量方法规范 第2-1部分:无线电骚扰和抗扰度测量方法 传导骚扰测量(中英文版) Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements |
![]() |
|
![]() |
GB/T 4668-1995 机织物密度的测定(中英文版) Textiles--Woven fabrics--Determination of number of threads per unit length |
![]() |
|
![]() |
GB/T 7676.4-2017 直接作用模拟指示电测量仪表及其附件 第4部分:频率表的特殊要求(中英文版) Direct acting indicating analogue electrical measuring instruments and their accessories—Part 4:Special requirements for frequency meters |
![]() |
|
![]() |
GB/T 20806-2022 饲料中中性洗涤纤维(NDF)的测定(中英文版) Determination of neutral detergent fiber (NDF) in feed |
![]() |
|
![]() |
GB/T 7935-2005 液压元件 通用技术条件(中英文版) Hydraulic fluid power-General requirements for hydraulic components |
![]() |
|
![]() |
GB/T 28916-2012 家务服务基本要求(中英文版) Basic requirement for housework service |
![]() |
|
![]() |
GB 4094-2016 汽车操纵件、指示器及信号装置的标志(中英文版) Symbols for controls, indicators and tell-tales of motor vehicles |
![]() |
|
![]() |
GB/T 39949.1-2021 液压传动 单杆缸附件的安装尺寸 第1部分:16MPa中型系列和25MPa系列(中英文版) Hydraulic fluid power—Mounting dimensions for accessories of single rod cylinder—Part 1:16 MPa medium and 25 MPa series |
![]() |
|
![]() |
GB/T 23947.1-2009 无机化工产品中砷测定的通用方法 第1部分:二乙基二硫代氨基甲酸银光度法(中英文版) Inorganic chemicals for industrial use - General method for determination of arsenic - Part 1: Silver diethyldithiocarbamate photometric method |
![]() |
|
![]() |
GB 31628-2014 食品安全国家标准 食品添加剂 高岭土(中英文版) National Food Safety Standard-Food Additives-Kaolin |
![]() |
|
![]() |
GB/T 32425-2015 通信产品环境意识设计导则(中英文版) Guide of environmental consciousdesign for communication products |
![]() |
|
![]() |
GB/T 13780-1992 棉纤维长度试验方法 自动光电长度仪法(中英文版) Test method for cotton length--Auto-photoelectric stapler |
![]() |
|
![]() |
GB/T 38758-2020 气动 有色金属缸筒技术要求(中英文版) Pneumatic fluid power—Rules of non-ferrous metallic cylinder body |
![]() |
|
![]() |
GB/T 1634.1-2004 塑料 负荷变形温度的测定 第1部分:通用试验方法(中英文版) Plastics--Determination of temperature of deflection under load--Part 1:General test method |
![]() |
|
![]() |
GB/T 26775-2011 车载音视频系统通用技术条件(中英文版) General technical specification for audio video system on board |
![]() |
|
![]() |
GB/T 22223-2008 食品中总脂肪、饱和脂肪(酸)、不饱和脂肪(酸)的测定 水解提取-气相色谱法(中英文版) Determination of total fat, saturated fat, and unsaturated fat in foods - Hydrolytic Extraction - Gas Chromatography |
![]() |
|
![]() |
GB/T 3029-1996 船用通风附件技术条件(中英文版) Specification of parts for ships’ ventilation |
![]() |
|
![]() |
GB/T 37857-2019 聚乳酸热成型一次性验尿杯(中英文版) Thermoforming disposable urine cup made by polylactic acid |
![]() |
|
![]() |
GB/T 17917-2008 零售企业管理信息系统基本功能要求(中英文版) Basic functional requirements for management information system of retailers |
![]() |
|
![]() |
GB/T 20313-2006 建筑材料及制品的湿热性能 含湿率的测定 烘干法(中英文版) Hygrothermal performance of building materials and produts - Determinaton of moisture content by drying at elevated temperature |
![]() |
|
![]() |
GB/T 30064-2013 金属材料 钢构件断裂评估中裂纹尖端张开位移(CTOD)断裂韧度的拘束损失修正方法(中英文版) Metallic materials - Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components |
![]() |
|
![]() |
GB/T 36122-2018 市政消防给水设施维护管理(中英文版) Maintenance and management of municipal fire water supply facilities |
![]() |
|
![]() |
GB/Z 43078-2023 液压传动连接 螺柱端可调管接头的安装指导(中英文版) Hydraulic Transmission Connections Installation Instructions for Stud-End Adjustable Pipe Couplings |
![]() |
|
![]() |
GB/T 25349-2010 使用乙醇汽油车辆检查、维护技术规范(中英文版) Technical specification for inspection and maintenance of vehicle using ethanol gasoline |
![]() |
|
![]() |
GB/T 34500.4-2017 稀土废渣、废水化学分析方法 第4部分:铜、锌、铅、铬、镉、 钡、钴、锰、镍、钛量的测定 电感耦合等离子体原子发射光谱法(中英文版) Chemical analysis methods for rare earth waste residue and waste water—Part 4: Determination of copper, zinc, lead, chromium, cadmium, barium, cobalt, manganese, nickel and titanium contents—Inductively coupled plasma emission spectrometry |
![]() |
|
![]() |
GB/T 18998.1-2022 工业用氯化聚氯乙烯(PVC-C)管道系统 第1部分:总则(中英文版) Chlorinated polyvinyl chloride (PVC-C) piping systems for industrial use - Part 1: General |
![]() |
|
![]() |
GB 28736-2012 电弧焊机能效限定值及能效等级(中英文版) Minimum allowable values of energy efficiency and energy efficiency grades for arc welding machines |
![]() |
|
![]() |
GB/T 14058-2008 γ射线探伤机(中英文版) Apparatus for gamma radiography |
![]() |
|
![]() |
GB/T 15544.4-2017 三相交流系统短路电流计算 第4部分:同时发生两个独立单相接地故障时的电流以及流过大地的电流(中英文版) Short-circuit current calculation in three-phase a.c.systems—Part 4: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth |
![]() |
|
![]() |
GB/T 16601-1996 光学表面激光损伤阈值测试方法 第1部分:1对1测试(中英文版) Test methods for laser induced damage threshold of optical surfaces--Part 1: 1 on 1 test |
![]() |
|
![]() |
GB/T 40336-2021 无损检测 泄漏检测 气体参考漏孔的校准(中英文版) Non-destructive testing—Leak testing—Calibration of reference leaks for gases |
![]() |
|
![]() |
GB/T 24169-2009 氟化工产品和消费品中全氟辛烷磺酰基化合物(PFOS)的测定 高效液相色谱-串联质谱法(中英文版) Determination of perfluorooctane sulfonates (PFOS) in the fluorine-containing products and consumer products - High performance liquid chromatography-tandem mass spectrometry |
![]() |
|
![]() |
GB/Z 20985-2007 信息技术 安全技术 信息安全事件管理指南(中英文版) Information technology - Security techniques -Information security incident management guide |
![]() |
|
![]() |
GB/T 15255-2015 硫化橡胶 人工气候老化试验方法 碳弧灯(中英文版) Rubber, vulcanized—Test method for artificial weathering—Carbon-arc lamp |
![]() |
|
![]() |
GB/T 18010-1999 腰果仁 规格(中英文版) Cashew kernels--Specification |
![]() |
|
![]() |
GB/T 32644-2016 平板显示器基板玻璃化学耐久性的试验方法(中英文版) Test method for chemical durability of flat panel display glass substrates |
![]() |
|
![]() |
GB 7300.1001-2020 饲料添加剂 第10部分:调味和诱食物质 谷氨酸钠(中英文版) Feed additive—Part 10:Flavouring and appetising substances—Sodium glutamate |
![]() |
|
![]() |
GB/T 26940-2011 牡蛎干(中英文版) Dried oyster |
![]() |
|
![]() |
GB/T 31500-2015 信息安全技术 存储介质数据恢复服务要求(中英文版) Information security technology—Requirement of data recovery service for storage media |
![]() |
|
![]() |
GB/T 23711.7-2019 塑料衬里压力容器试验方法 第7部分:泄漏试验(中英文版) Test method for pressure vessels lined with plastics—Part 7:Leakage testing |
![]() |
|
![]() |
GB/T 22715-2008 交流电机定子成型线圈耐冲击电压水平(中英文版) Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines |
![]() |
|
![]() |
GB/Z 30249-2013 测量、控制和实验室用电气设备的安全要求 GB 4793的符合性验证报告的编写规程(中英文版) Safety requirements for electrical equipment for measurement,control,and laboratory use―Protocol for the preparation of conformity verfication reports for the GB 4793 series |
![]() |
|
![]() |
GB/T 34691.1-2018 塑料-热塑性聚酯(TP)模塑和挤出材料-第1部分:命名系统和分类基础(中英文版) Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 1:Designation system and basis for specifications |
![]() |
|
![]() |
GB/T 17068-1997 车间空气中甲酸的气相色谱测定方法(中英文版) Workplace air--Determination of formic acid--Gas chromatographic method |
![]() |
|
![]() |
GB/T 43418-2023 亚麻纤维组成成分的检测方法(中英文版) Method for testing the composition of flax fiber |
![]() |
|
![]() |
GB/T 16963-2010 国际贸易合同代码编制规则(中英文版) Drafting rules for international trade contract codes |
![]() |
|
![]() |
GB/T 15072.12-2008 贵金属合金化学分析方法 银合金中钒量的测定 过氧化氢分光光度法(中英文版) Test method of precious metal alloys - Determination of nickel contents for silver alloys - Hydrogen peroxide spectrophotometry |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [349] [350] [351] [352] [353] [354] [355] |