网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 38272-2019
机械安全 机械设备安全升级指南(中英文版)
Safety of machinery—Guidelines for safety upgrading of machinery
GB/T 10611-2003
工业用网 标记方法与网孔尺寸系列(中英文版)
Industrial screens--Designation and nominal sizes of apertures
GB/T 16857.3-2009
产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第3部分:配置转台的轴线为第四轴的坐标测量机(中英文版)
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis
GB/T 51315-2018
射频识别应用工程技术标准(中英文版)
Radio Frequency Identification Application Engineering Technology Standard
GB 19082-2023
医用一次性防护服(中英文版)
Medical disposable protective clothing
GB/T 7895-2008
人造光学石英晶体(中英文版)
Optical grade synthetic quartz crystal
GB/T 28173-2011
嵌入式系统 系统工程过程应用和管理(中英文版)
Embedded systems - Application and management of the systems engineering process
GB/T 34855-2017
洗手液(中英文版)
Hand cleaner
GB/T 26817-2023
企业信用调查报告格式要求 基本信息报告、普通调查报告、深度调查报告(中英文版)
Format requirements for corporate credit investigation reports Basic information report, general investigation report, in-depth investigation report
GB/T 8123-2007
杠杆指示表(中英文版)
Dial test indicators
GB/T 5584.4-2009
电工用铜、铝及其合金扁线 第4部分:铜带(中英文版)
Rectangular copper or aluminuium and its alloy wires for electrical purposes - Part 4: Strip copper conductor
GB/T 16104-1995
车间空气中钨或碳化钨的硫氰酸钾-三氯化钛分光光度测定方法(中英文版)
Workplace air--Determination of tungsten or tungsten carbide--Potassium thiocyanate-titanous trichloride spectrophotometric method
GB/T 30805-2014
建筑用绝热制品 部分浸入法测定短期吸水量(中英文版)
Thermal insulating products for building applications—Determination of short term water absorption by partial immersion
GB/T 33591-2017
智能变电站时间同步系统及设备技术规范(中英文版)
Technical specification of time synchronism system and equipment in smart substation
GB/T 41854-2022
包装 产品包装用的一维条码和二维条码(中英文版)
Packaging 1D and 2D barcodes for product packaging
GB/T 4549.9-2004
铁道车辆词汇 第9部分:电气装置(中英文版)
Railway vehicle vocabulary--Part 9:Electric equipment
GB 16793.1-2010
信息技术 通用多八位编码字符集(CJK统一汉字) 24点阵字型 第1部分:宋体(中英文版)
Information technology - Universal multiple-octet coded character set (CJK unified ideographs) - 24-dot matrix font - Part 1: Song Ti
GB 1886.281-2016
食品安全国家标准 食品添加剂 香茅醛(中英文版)
National Food Safety Standard - Food Additives - citronellal
GB/T 40739-2021
燃气轮机? 燃气轮机设备的数据采集和趋势监测系统要求(中英文版)
Gas turbines -- Data acquisition and trend monitoring system requirements for gas turbine installations
GB 14050-2008
系统接地的型式及安全技术要求(中英文版)
Types and safety technical requirements of system earthing
GB/T 29543-2013
低温型风力发电机组(中英文版)
Wind turbine generator systems for cold environments
GB/T 2983-2015
摩托车轮胎系列(中英文版)
Series of motorcycle tyres
GB 50285-1998
调幅收音台和调频电视转播台与公路的防护间距标准(中英文版)
Standad for protection distance from highway to AM,FM and TV rebroadcast stations
GB/T 39376-2020
皮革 抽样 批样抽样数量(中英文版)
Leather—Sampling—Number of items for a gross sample
GB/T 21482-2008
船舶与海上技术 充气橡胶靠球(中英文版)
Ships and marine technology - Pneumatic rubber fenders
GB/T 24763-2009
泡沫混凝土砌块用钢渣(中英文版)
Steel slag for foamed concrete blocks
GB/T 16465-1996
膜集成电路和混合膜集成电路分规范(采用能力批准程序)(中英文版)
Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of the capability approval procedures
GB/T 37353-2019
自升式钻井平台钻台结构设计指南(中英文版)
Design guidelines for drill floor structure of self-elevating drilling units
GB/T 19889.2-2005
声学 建筑和建筑构件隔声测量 第2部分:数据精密度的确定、验证和应用(中英文版)
Acoustics-Measurement of sound insulation in buildings and of building elements-Part2:Determination,verification and application of precision data
GB/T 43749-2024
微束分析-电子探针显微分析-无水碳酸盐矿物的定量分析方法(中英文版)
Microbeam analysis - Electron probe microscopy - Quantitative analysis of anhydrous carbonate minerals Method
GB/T 8923.1-2011
涂覆涂料前钢材表面处理 表面清洁度的目视评定 第1部分:未涂覆过的钢材表面和全面清除原有涂层后的钢材表面的锈蚀等级和处理等级(中英文版)
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previou
GB/T 36698-2018
带式输送机设计计算方法(中英文版)
Basis for calculation of belt conveyors
GB/T 42712-2023
力学损伤测试用中国假人设计原则与标定方法(中英文版)
Design principles and calibration methods of Chinese dummies for mechanical damage testing
GB/T 23506-2009
石油采油井场燃气动力机组(中英文版)
The natural gas power set for oil pruduction drilling site
GB/T 5949-2014
透明石英玻璃气泡、气线试验方法(中英文版)
Test method for bubble and air line of transparent quartz glass
GB/T 33975-2017
高速铁路扣件用弹簧钢热轧盘条(中英文版)
Hot-rolled spring steel wire rod for high-speed railway fastener
GB 18054-2000
居住区大气中苯并(a)芘卫生标准(中英文版)
Hygienic standard for benzo(a)pyrene in the atmospheric air of residential areas
GB/T 4353-2022
载客汽车运行燃料消耗量(中英文版)
Fuel consumption of passenger cars
GB/T 2479-2008
普通磨料 白刚玉(中英文版)
Conventional abrasive - White fused alumina
GB/T 26334-2010
膜式燃气表安装配件(中英文版)
Fittings for installation of diaphragm gas meters
GB/T 819.2-1997
十字槽沉头螺钉 第2部分:钢8.8、不锈钢A2-70和有色金属CU2或CU3(中英文版)
Cross recessed countersunk flat head screws(common head style)--Grade A--Part 2:Steel ofproperty class 8.8,stainless steel and non-ferrous metals
GB/T 31334.4-2016
浸胶帆布试验方法 第4部分:干热收缩率(中英文版)
Test methods for dipped canvas—Part 4:Hot air thermal shrinkage
GB/T 20303.5-2021
起重机 司机室和控制站 第5 部分:桥式和门式起重机(中英文版)
Cranes—Cabins and control stations—Part 5: Overhead travelling and portal bridge cranes
GB 20688.2-2006
橡胶支座 第2部分:桥梁隔震橡胶支座(中英文版)
Rubber bearings - Part 2: Elastomeric seismic-protection isolators for bridges
GB/T 6403.1-2008
球面半径(中英文版)
Radii of sphere surfaces
GB 50037-2013
建筑地面设计规范(中英文版)
Code for design of building ground
GB/T 32260.2-2015
金属材料焊缝的破坏性试验 焊件的冷裂纹试验 弧焊方法 第2部分:自拘束试验(中英文版)
Destructive tests on welds in metallic materials—Cold cracking tests for weldments—Arc welding processes—Part 2: Self-restraint tests
GB/T 5959.12-2020
电热和电磁处理装置的安全 第12部分:对红外电热装置的特殊要求(中英文版)
Safety in installations for electroheating and electromagnetic processing—Part 12: Particular requirements for infrared electroheating
GB/T 24935-2010
全地形车最大侧倾稳定角试验方法(中英文版)
The test method of maximum stable side-inclination for all-terrain vehicles
GB 51371-2019
废弃电线电缆光缆处理工程设计标准(中英文版)
Standard for design of the waste wire cable and optical fiber cable processing engineering

找到:57335條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [351] [352] [353] [354] [355] [356] [357]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved