网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 30886-2014
环形套筒窑(中英文版)
Annular shaft kiln
GB/T 18950-2023
橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定(中英文版)
Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties.
GB 14569.1-2011
低、中水平放射性废物固化体性能要求 水泥固化体(中英文版)
Performance requirements for low and intermediate level radioactive waste form - Cemented waste form
GB/T 34190-2017
电工钢表面涂层的重量(厚度) X射线光谱测试方法(中英文版)
Surface coating weight (thickness) of electrical steel—X-ray spectrometric method
GB/T 42168.1-2022
避孕套 临床研究指南 第1部分:男用避孕套基于自我报告的临床功能研究(中英文版)
Condoms—Guidelines for clinical research—Part 1: Self-reported clinical functional studies of male condoms
GB/T 8290-2008
浓缩天然胶乳 取样(中英文版)
Natural rubber latex concentrate - Sampling
GB/T 5522-2008
粮油检验 粮食、油料的过氧化氢酶活动度的测定(中英文版)
Inspection of grains and oils - Determination of hydrogen peroxidase activity of grain and oilseeds
GB/T 7325-1987
润滑脂和润滑油蒸发损失测定法(中英文版)
Petroleum products--Lubricating greases and oils--Determination of evaporation loss
GB/T 21910-2017
轿车轮胎湿路面相对抓着性能试验方法(中英文版)
Method for measuring relative wet grip performance of passenger car tyres
GB/T 2423.19-2013
环境试验 第2部分:试验方法 试验Kc:接触点和连接件的二氧化硫试验(中英文版)
Environmental testing - Part 2: Test methods - Test Kc: Sulphur dioxide test for contacts and connections
GB 16548-2006
病害动物和病害动物产品生物安全处理规程(中英文版)
Biosafety specific ation on sick animal and animal product disposal
GB/T 38575-2021
眼镜架 螺纹(中英文版)
Spectacle frames -- Screw threads
GB/T 6285-2003
气体中微量氧的测定 电化学法(中英文版)
Determination of trace oxygen in gases--Eletrochemical method
GB 439-1990
航空喷气机润滑油(中英文版)
Aviation jet engine lubricating oils
GB/T 2828.10-2010
计数抽样检验程序 第10部分:GB/T 2828计数抽样检验系列标准导则(中英文版)
Sampling procedures for inspection by attributes - Part 10: Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes
GB 23200.31-2016
食品安全国家标准 食品中丙炔氟草胺残留量的测定 气相色谱-质谱法(中英文版)
National food safety standards—Determination of flumioxazin residues in foods Gas chromatography-mass spectrometry
GB/T 38894-2020
无损检测 电化学检测 总则(中英文版)
Non-destructive testing—Electrochemical testing—General principles
GB 28478-2012
户外休闲家具安全性能要求 桌椅类产品(中英文版)
General safety requirements of outdoor leisure furniture - Seating and tables
GB/T 38015-2019
纺织品 定量化学分析 氨纶与某些其他纤维的混合物(中英文版)
Textiles—Quantitative chemical analysis—Mixtures of elastane and certain other fibers
GB/T 18512-2008
高炉喷吹用煤技术条件(中英文版)
Specifications of coal used in pulverized coal injection (PCI)
GB/T 13255.6-2009
工业用己内酰胺试验方法 第6部分:酸度或碱度的测定(中英文版)
Test methods of caprolactam for industrial use - Part 6: Determination of acidity or alkalinity
GB/T 12225-2018
通用阀门 铜合金铸件技术条件(中英文版)
General purpose industrial valves—Specification of copper alloy castings
GB/T 2981-2014
工业车辆充气轮胎技术条件(中英文版)
Technical specification of pneumatic tyres for industrial vehicles
GB/T 14805.6-2007
行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号:4,语法发布号:1) 第6部分: 安全鉴别和确认报文(报文类型为AUTACK)(中英文版)
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4,Syntax release number:1) - Part 6: Secure authentication and acknowledgement message(message type - AUTACK)
GB 1886.370-2023
食品安全国家标准 食品添加剂 辛烯基琥珀酸淀粉钠(中英文版)
National Food Safety Standard Food Additive Sodium Starch Octenyl Succinate
GB/T 2815-2003
钻床 主轴端部(中英文版)
Drilling machines--Spindle noses
GB/Z 26584-2011
生姜生产技术规范(中英文版)
Production technical practice for ginger
GB/T 34557-2017
砂浆、混凝土用乳胶和可再分散乳胶粉(中英文版)
Latex and redispersible polymer powder for mortar and concrete
GB/T 14321-2022
刚玉磨料中α-Al2O3相X射线定量测定方法(中英文版)
X-ray Quantitative Determination Method of α-Al2O3 Phase in Corundum Abrasive
GB 2797-2008
灯头总技术条件(中英文版)
Technical specification for lamp caps
GB/T 4127.18-2017
固结磨具 尺寸 第18部分:平板玻璃磨边用砂轮(中英文版)
Bonded abrasive products—Dimensions—Part 18: Grinding wheels for flat glass edge grinding machines
GB 4789.26-2013
食品安全国家标准 食品微生物学检验 商业无菌检验(中英文版)
National Food Safety Standard-Microbiological examination of food - Commercial sterility test
GB/T 6582-2021
玻璃 玻璃颗粒在98℃时的耐水性 试验方法和分级(中英文版)
Glass—Hydrolytic resisitance of glass grains at 98℃—Method of test and classification
GB 25466-2010
铅、锌工业污染物排放标准(中英文版)
Emission Standard of Pollutants from Lead and Zink Industry
GB/T 503-2016
汽油辛烷值的测定 马达法(中英文版)
Determination of the gasoline octane number—Test method for motor octane number
GB/T 40764-2021
地理信息 过滤编码(中英文版)
Geographic information—Filter encoding
GB 21693-2008
配合饲料中T-2毒素的允许量(中英文版)
Tolerance limits for T-2 toxin in formula feed
GB/T 19553-2004
纺织机械与附件 闭口“O”型综耳综丝用的穿综杆(中英文版)
Textile machinery and accessories--Heald carrying rods for healds with closed “O”-shaped end loops
GB/T 13747.16-1992
锆及锆合金化学分析方法 氯化银浊度法测定氯量(中英文版)
Zirconium and zirconium alloys--Determination of chloric content--Silver chloride nephelometry method
GB/T 11313.16-2015
射频连接器 第16部分:外导体内径为7mm(0.276in)、特性阻抗为50Ω(75Ω)、螺纹连接的射频同轴连接器(N型)分规范(中英文版)
Radio-frequency connectors—Part 16:Sectional specification for RF coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling—Characteristics impedance 50 Ω (75 Ω) (type N)
GB/T 28856-2012
硅压阻式压力敏感芯片(中英文版)
Silicon piezoresistive pressure-sensitive chip
GB/T 3634.1-2006
氢气 第1部分:工业氢(中英文版)
Hydrogen―Part 1: Industrial hydrogen
GB/T 51390-2019
核电厂混凝土结构技术标准(中英文版)
Technical standard for concrete structures of nuclear power plants
GB/T 24281-2009
纺织品 有机挥发物的测定 气相色谱-质谱法(中英文版)
Textiles - Determination of volatile organic compounds - Gas chromatography/mass spectrography
GB 7816-1998
工业黄磷(中英文版)
Yellow phosphorus for industrial use
GB/T 20524-2018
农林小气候观测仪(中英文版)
Agriculture and forest microclimate measuring instrument
GB 50408-2015
烧结厂设计规范(中英文版)
Code for design of sintering plant
GB/T 10739-2023
纸、纸板和纸浆 试样处理和试验的标准大气条件(中英文版)
Paper, paperboard and pulp Standard atmospheric conditions for specimen handling and testing
GB/T 4071-1983
光致荧光粉测试方法(中英文版)
Measuring method for the phosphor excited by light
GB/T 26804.4-2011
工业控制计算机系统 功能模块模板 第4部分:模拟量输入输出通道模板性能评定方法(中英文版)
Industrial control computer system - Function module - Part 4: Methods of evaluating the performance for analogue input/output channel module

找到:57335條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [36] [37] [38] [39] [40] [41] [42]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved