中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 4622.1-2009 缠绕式垫片 分类(中英文版) Classification for spiral wound gaskets |
![]() |
|
![]() |
GB/T 5009.119-2003 复合食品包装袋中二氨基甲苯的测定(中英文版) Determination of diaminomethylbezen of complex for food packaging material |
![]() |
|
![]() |
GB 14883.5-2016 食品安全国家标准 食品中放射性物质钋-210的测定(中英文版) National Food Safety Standard-Determination of radioactive substance polonium - 210 in food |
![]() |
|
![]() |
GB/T 4169.10-2006 塑料注射模零件 第10部分:支承柱(中英文版) Components of injection moulds for plastics - Part 10: Support pillar |
![]() |
|
![]() |
GB/T 40794-2021 稀土永磁材料高温磁通不可逆损失检测方法(中英文版) Measurement method of irreversible magnetic flux loss due to high temperature of rare earth permanent magnet |
![]() |
|
![]() |
GB/T 27780-2011 杀鼠器械实验室效果测定及评价 粘鼠板(中英文版) Laboratory efficacy test methods and criterions of public health equipment - Rodent sticky trap |
![]() |
|
![]() |
GB/T 31988-2015 印制电路用铝基覆铜箔层压板(中英文版) Aluminium base copper clad laminate for printed circuits |
![]() |
|
![]() |
GB/T 39280-2020 钨极惰性气体保护电弧焊用非合金钢及细晶粒钢实心焊丝(中英文版) Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels |
![]() |
|
![]() |
GB/T 23431-2009 城市轻轨交通铰接车辆通用技术条件(中英文版) General technical specification for urban light rail traffic coupled vehicles |
![]() |
|
![]() |
GB/T 11141-2014 工业用轻质烯烃中微量硫的测定(中英文版) light olefins for industrial use―Determination of trace sulfur |
![]() |
|
![]() |
GB/T 23131-2019 家用和类似用途电坐便器便座(中英文版) Household and similar electrical toilets |
![]() |
|
![]() |
GB/T 43836-2024 企业科技创新系统能力水平评价规范(中英文版) Test methods for color photoresist for flat panel displays-Part 2: Optical properties |
![]() |
|
![]() |
GB/T 12742-1991 自行车检测设备和器具技术条件(中英文版) The specifications of testing equipment and measuring appliance for bicycle |
![]() |
|
![]() |
GB/T 13779-2008 棉纤维 长度试验方法 梳片法(中英文版) Cotton fibres - Test method for length - Comb sorter method |
![]() |
|
![]() |
GB/T 12085.7-2010 光学和光学仪器 环境试验方法 第7部分:滴水、淋雨(中英文版) Optics and optical instruments - Environmental test methods - Part 7: Resistance to drip or rain |
![]() |
|
![]() |
GB/T 7917.3-1987 化妆品卫生化学标准检验方法 铅(中英文版) Standard methods of hygienic test for cosmetics--Lead |
![]() |
|
![]() |
GB 50025-2004 湿陷性黄土地区建筑规范(中英文版) Code for building construction in collapsible loess regions |
![]() |
|
![]() |
GB/T 35934-2018 棉花 染色色差试验方法(中英文版) Cotton—Test method for differential dyeing behavior |
![]() |
|
![]() |
GB/T 21185-2007 信息技术 办公设备 用模拟测试版评价彩色复印机图像印品性能的方法 制作和应用(中英文版) Information technology - Office machines - Method of specifying image reproduction of colour copying machines by analog test charts - Realisation and application |
![]() |
|
![]() |
GB/T 41638.2-2023 塑料 生物基塑料的碳足迹和环境足迹 第2部分:材料碳足迹 由空气中并入到聚合物分子中CO2的量(质量)(中英文版) Plastics - Carbon and environmental footprints of bio-based plastics - Part 2: Carbon footprint of materials - Amount (mass) of CO2 incorporated into polymer molecules from the air |
![]() |
|
![]() |
GB/T 18423-2013 橡胶和塑料软管及非增强软管 液体壁透性测定(中英文版) Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls |
![]() |
|
![]() |
GB/T 19688.2-2005 信息与文献 书目数据元目录 第二部分:采访应用(中英文版) Information and Documentation--Bibliographic Data Element Directory--Part 2:Acquisitions applications |
![]() |
|
![]() |
GB/T 33913.2-2017 三苯基膦氯化铑化学分析方法 第2部分:铅、铁、铜、钯、铂、铝、镍、镁、锌量的测定 电感耦合等离子体原子发射光谱法(中英文版) Method for chemical analysis of tris(triphenylphosphine) rhodium(I) chloride—Part 2:The determination of lead,iron,copper,palladium,platinum,aluminium,nickel,magnesium,zinc content—Inductively coupled plasma atomic emission spectrome |
![]() |
|
![]() |
GB 14923-2022 实验动物 遗传质量控制(中英文版) Laboratory animals Genetic quality control |
![]() |
|
![]() |
GB 5413.9-2010 食品安全国家标准 婴幼儿食品和乳品中维生素A、D、E的测定(中英文版) National food safety standard Determination of vitamin A,D,E in foods for infants and young children,milk and milk products |
![]() |
|
![]() |
GB/T 33244-2016 数字硬打样系统质量要求及检验方法(中英文版) Quality requirements and test methods for digital hard-copy proofing system |
![]() |
|
![]() |
GB/T 8100.3-2021 液压阀安装面 第3部分:减压阀、顺序阀、卸荷阀、节流阀和单向阀(中英文版) Mounting surfaces of hydraulic valves—Part 3: Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves |
![]() |
|
![]() |
GB 28314-2012 食品安全国家标准 食品添加剂 辣椒油树脂(中英文版) National Food Safety Standard Food Additive Capsicum Oleoresin |
![]() |
|
![]() |
GB/T 32294-2015 锻制承插焊和螺纹活接头(中英文版) Forged unions, socket-welding and threaded |
![]() |
|
![]() |
GB/T 38537-2020 纤维增强树脂基复合材料超声检测方法 C扫描法(中英文版) Ultrasonic testing method for fiber reinforced resin matrix composites—C-scan method |
![]() |
|
![]() |
GB/T 21740-2008 基础地理信息城市数据库建设规范(中英文版) Specifications for urban database construction of fundamental geographic information |
![]() |
|
![]() |
GB/T 23513.3-2009 锗精矿化学分析方法 第3部分:硫量的测定 硫酸钡重量法(中英文版) Chemical analysis methods for germanium concentrate - Part 3: Determination of sulfur content - Barium sulfate gravimetry |
![]() |
|
![]() |
GB/T 16739.1-2014 汽车维修业开业条件 第1部分:汽车整车维修企业(中英文版) Certification requirements for motor vehicle maintenance and repair enterprise―Part 1: For motor vehicle maintenance and repair |
![]() |
|
![]() |
GB/T 20216-2006 有效残余油墨的测定(中英文版) Determination of effective residual ink |
![]() |
|
![]() |
GB/T 37578-2019 尿素级超低碳奥氏体不锈钢无缝钢管(中英文版) Urea grade ultra-low carbon austenitic seamless stainless steel tubes and pipes |
![]() |
|
![]() |
GB/T 18410-2024 车辆识别代号条码标签(中英文版) Vehicle identification code barcode label |
![]() |
|
![]() |
GB/T 17825.5-1999 CAD文件管理 基本程序(中英文版) Management of CAD documents--Basic procedure |
![]() |
|
![]() |
GB/T 13882-2010 饲料中碘的测定 硫氰酸铁-亚硝酸催化动力学法(中英文版) Determination of iodine in feeds - Ferric thiocyanate-nitric acid catalytic kinetic method |
![]() |
|
![]() |
GB/T 36331-2018 信息技术 回鹘式蒙古文名义字符、变形显现字符和控制字符使用规则(中英文版) Information technology—Uigur-Mongolian characters, presentation characters and use rules of controlling characters |
![]() |
|
![]() |
GB/T 28712.2-2023 热交换器型式与基本参数 第2部分:固定管板式热交换器(中英文版) Heat exchanger types and basic parameters Part 2: Fixed tube plate heat exchanger |
![]() |
|
![]() |
GB/T 22417-2008 叉车 货叉叉套和伸缩式货叉 技术性能和强度要求(中英文版) Fork-lift trucks - Fork-arm extensions and telescopic fork arms - Technical characteristics and strength requirements |
![]() |
|
![]() |
GB/T 13747.8-1992 锆及锆合金化学分析方法 亚硝基R盐分光光度法测定钴量(中英文版) Zirconium and zirconium alloys--Determination of cobalt content--1-Nitroso-2-hydroxy-3,6-naphthalene-disulfonic acid (sodium salt) spectrophotometric method |
![]() |
|
![]() |
GB/T 29767-2013 信息安全技术 公钥基础设施 桥CA体系证书分级规范(中英文版) Information security techniques - Public key infrastructure - Bridge Certification Authority leveled certificate specification |
![]() |
|
![]() |
GB/T 13747.19-2017 锆及锆合金化学分析方法 第19部分:钛量的测定 二安替比林甲烷分光光度法和电感耦合等离子体原子发射光谱法(中英文版) Methods for chemical analysis of zirconium and zirconium alloys—Part19:Determination of titanium content—Diantipyrylmethane spectrophotometry and the inductively coupled plasma atomic emission spectrometry |
![]() |
|
![]() |
GB/T 41252-2022 离散制造能效评估方法(中英文版) Discrete Manufacturing Energy Efficiency Assessment Methods |
![]() |
|
![]() |
GB/T 18380.11-2008 电缆和光缆在火焰条件下的燃烧试验 第11部分:单根绝缘电线电缆火焰垂直蔓延试验 试验装置(中英文版) Tests on electric and optical fibre cables under fire conditions - Part 11:Test for vertical flame propagation for a single insulated wire or cable - Apparatus |
![]() |
|
![]() |
GB 24941-2010 低速货车安全架 要求和试验方法(中英文版) Safety frames for low-speed goods vehicles - Requirements and test methods |
![]() |
|
![]() |
GB/T 35478-2017 紧固件 螺栓、螺钉和螺柱预涂聚酰胺锁紧层技术条件(中英文版) Fastener—Steel bolts,screws and studs with polyamide locking pre-coating technical specification |
![]() |
|
![]() |
GB 5959.8-2007 电热装置的安全 第8部分:对电渣重熔炉的特殊要求(中英文版) Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces |
![]() |
|
![]() |
GB/T 28515.2-2021 自动交换光网络(ASON)测试方法 第2部分:基于OTN的ASON(中英文版) Test method for automatically switched optical network(ASON)—Part 2:OTN-based ASON |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [438] [439] [440] [441] [442] [443] [444] |