中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 4459.7-2017 机械制图 滚动轴承表示法(中英文版) Technical drawings—The detailed simplified representation of rolling bearings |
![]() |
|
![]() |
GB 42250-2022 信息安全技术 网络安全专用产品安全技术要求(中英文版) Information Security Technology - Security Technical Requirements for Network Security Special Products |
![]() |
|
![]() |
GB/T 29263-2012 信息技术 面向服务的体系结构(SOA)应用的总体技术要求(中英文版) Information technology - General technical requirement of SOA-based application |
![]() |
|
![]() |
GB/T 16861-1997 感官分析 通过多元分析方法鉴定和选择用于建立感官剖面的描述词(中英文版) Sensory analysis--Identification and selection of descriptors for establishing a sensory profile by a multidimensional approach |
![]() |
|
![]() |
GB/T 7288.1-1987 设备可靠性试验 推荐的试验条件 室内便携设备 粗模拟(中英文版) Equipment reliability testing--Preferred test conditions indoor portable equipment--Low degree ofsimulation |
![]() |
|
![]() |
GB/T 33253-2016 移动实验室 载具通用技术规范(中英文版) Mobile laboratory—General specification for carriers |
![]() |
|
![]() |
GB/T 24373-2009 纺织机械与附件 梳理机用隔距片(中英文版) Textile machinery and accessories - Card gauges |
![]() |
|
![]() |
GB/T 24818.2-2021 起重机 通道及安全防护设施 第2部分:流动式起重机(中英文版) Cranes—Access, guards and restraints—Part 2: Mobile cranes |
![]() |
|
![]() |
GB/T 4089-2008 数据的统计处理和解释 泊松分布参数的估计和检验(中英文版) Statistical interpretation of data Estimation and hypothesis test of parameter in Poisson distribution |
![]() |
|
![]() |
GB/T 32146.1-2015 检验检测实验室设计与建设技术要求 第1部分:通用要求(中英文版) Technical requirement of design and construction for inspection and testing laboratory—Part 1: General specification |
![]() |
|
![]() |
GB/T 80-2007 内六角凹端紧定螺钉(中英文版) hexagon socket set screws with cup point |
![]() |
|
![]() |
GB/T 5193-2020 钛及钛合金加工产品超声检验方法(中英文版) Method of ultrasonic inspection for wrought titanium and titanium alloy products |
![]() |
|
![]() |
GB/T 27933-2011 震后恢复重建工程资金初评估(中英文版) Preliminary cost estimation of post-earthquake rehabilitation of engineering structures |
![]() |
|
![]() |
GB/T 12706.3-2008 额定电压1kV(Um=1.2kV)到35kV (Um=40.5kV)挤包绝缘电力电缆及附件 第3部分:额定电压35kV(Um=40.5kV)电缆(中英文版) Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV) - Part 3: Cables for rated voltage of 35kV(Um=40.5kV) |
![]() |
|
![]() |
GB/T 37582-2019 海洋工程装备腐蚀控制工程全生命周期要求(中英文版) Requirements for corrosion control engineering in the life cycle of the marine engineering equipment |
![]() |
|
![]() |
GB/T 4340.1-2024 金属材料-维氏硬度试验-第1部分:-试验方法(中英文版) Metallic materials-Vickers hardness test-Part 1:-Test method |
![]() |
|
![]() |
GB 4824-2013 工业、科学和医疗(ISM)射频设备 骚扰特性 限值和测量方法(中英文版) Industrial, scientific and medical equipment—Radio-frequency disturbance characteristics-Limits and methods of measurement |
![]() |
|
![]() |
GB/T 5586-1998 电触头材料基本性能试验方法(中英文版) Test methods for essential porperty of electric contact material |
![]() |
|
![]() |
GB/T 3654.5-1983 铌铁化学分析方法 钼蓝光度法测定磷量(中英文版) Methods for chemical analysis of ferroniobium--The molybdenum blue photometric method for the determination of the phosphorus content |
![]() |
|
![]() |
GB/T 3367.3-2018 内燃机车词汇 第3部分:车体、转向架及制动装置(中英文版) Glossary of terms for diesel locomotive—Part 3:Locomotive body,bogie and brake equipment |
![]() |
|
![]() |
GB 7144-1999 气瓶颜色标志(中英文版) Coloured cylinder mark for gases |
![]() |
|
![]() |
GB/T 25944-2010 铝土矿 批中不均匀性的实验测定(中英文版) Aluminium ores - Experimental determination of the heterogeneity of distribution of a lot |
![]() |
|
![]() |
GB/T 28778-2023 先导式安全阀(中英文版) Pilot operated safety valve |
![]() |
|
![]() |
GB/T 1479.3-2017 金属粉末 松装密度的测定 第3部分:振动漏斗法(中英文版) Metallic powders-Determination of apparent density-Part 3: Oscillating funnel method |
![]() |
|
![]() |
GB/T 9043-2008 通信设备过电压保护用气体放电管通用技术条件(中英文版) General technical requirements of gas discharge tubes for the over-voltage protection of telecommunications installations |
![]() |
|
![]() |
GB/T 41345-2022 塑料瓶盖压塑成型模具通用技术要求(中英文版) General technical requirements for compression molding molds for plastic bottle caps |
![]() |
|
![]() |
GB/T 29344-2012 灵芝孢子粉采收及加工技术规范(中英文版) Standards on harvesting and processing techniques of ganoderma lucidum spore powder |
![]() |
|
![]() |
GB/T 19973.2-2005 医用器材的灭菌 微生物学方法 第二部分:确认灭菌过程的无菌试验(中英文版) Sterilization of medical devices -- Microbiological methods -- Part 2: Test of sterility performed in the validation of a sterilization process |
![]() |
|
![]() |
GB/T 35533-2017 染色体异常检测基因芯片通用技术要求(中英文版) General technical requirement for chromosomal abnormality detection microarray |
![]() |
|
![]() |
GB 24511-2009 承压设备用不锈钢钢板及钢带(中英文版) Stainless steel plate, sheet and strip for pressure equipments |
![]() |
|
![]() |
GB/T 39875-2021 疑似毒品中氯氮卓检验 气相色谱和气相色谱-质谱法(中英文版) Examination methods for chlordiazepoxide in suspected drugs—Gas chromatography and gas chromatography-mass spectrometry |
![]() |
|
![]() |
GB/T 5786-2016 六角头螺栓 细牙 全螺纹(中英文版) Hexagon head bolts—Fine pitch thread—Full thread |
![]() |
|
![]() |
GB/T 38957-2020 海上风电场热带气旋影响评估技术规范(中英文版) Technical specification for effect evaluation of tropical cyclone on offshore wind power project |
![]() |
|
![]() |
GB/T 15089-2001 机动车辆及挂车分类(中英文版) Classification of power-driven vehicles and trailers |
![]() |
|
![]() |
GB/T 27805-2011 工业磷酸脲(中英文版) Urea phosphate for industrial use |
![]() |
|
![]() |
GB/T 1031-2009 产品几何技术规范(GPS) 表面结构 轮廓法 表面粗糙度参数及其数值(中英文版) Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values |
![]() |
|
![]() |
GB/T 2518-2019 连续热镀锌和锌合金镀层钢板及钢带(中英文版) Continuously hot-dip zinc and zinc alloy coated steel sheet and strip |
![]() |
|
![]() |
GB/T 14635-2008 稀土金属及其化合物化学分析方法 稀土总量的测定(中英文版) Rare earth metals and their compounds - Determination of total rare earth contents |
![]() |
|
![]() |
GB/T 30586-2014 连铸轧制铜包铝扁棒、扁线(中英文版) Copper clad aluminum flat bars and wires manufactured by continuous-casting and rolling |
![]() |
|
![]() |
GB/T 6900-2006 铝硅系耐火材料化学分析方法(中英文版) Chemical analysis of alumina-silica refractories |
![]() |
|
![]() |
GB/T 13333-2018 混凝土泵(中英文版) Concrete pump |
![]() |
|
![]() |
GB/T 26027-2010 铝及铝合金大规格拉制无缝管(中英文版) Aluminium and aluminium alloys drawn seamless tubes for large circumscribed circle diameter of cross section |
![]() |
|
![]() |
GB/T 20914.5-2023 冲模 氮气弹簧 第5部分:氮气弹簧安全规范(中英文版) Dies Nitrogen gas springs Part 5: Safety regulations for nitrogen springs |
![]() |
|
![]() |
GB/T 34690.5-2017 印刷技术 胶印数字化过程控制 第5部分:软打样(中英文版) Graphic technology—Digitalized process control for offset printing—Part 5: Soft proofing |
![]() |
|
![]() |
GB/T 41660-2022 制冷试验装置能源利用监测评价方法(中英文版) Monitoring and Evaluation Method for Energy Utilization of Refrigeration Test Equipment |
![]() |
|
![]() |
GB/T 15470-2002 家用直接作用式房间电加热器性能测试方法(中英文版) Household electric direct-acting room heaters--Methods for measuring performance |
![]() |
|
![]() |
GB/T 13539.6-2013 低压熔断器 第6部分:太阳能光伏系统保护用熔断体的补充要求(中英文版) Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
![]() |
|
![]() |
GB/T 35750-2017 烟花爆竹 炭粉(中英文版) Fireworks—Charcoal powder |
![]() |
|
![]() |
GB/T 24834-2009 1000kV交流架空输电线路金具技术规范(中英文版) Technical specification for fittings of 1000kV AC overhead transmission line |
![]() |
|
![]() |
GB/T 36271.2-2021 交流1kV及直流1.5kV以上电力设施 第2部分:直流(中英文版) Power installations exceeding 1 kV a.c. and 1.5 kV d.c.—Part 2: d.c. |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [455] [456] [457] [458] [459] [460] [461] |