网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB 14569.3-1995
低、中水平放射性废物固化体性能要求 沥青固化体(中英文版)
Characteristic requirements for solidified waste of low and intermediate level radioactive waste--Bitumen solidified waste
GB/T 33820-2017
金属材料 延性试验 多孔状和蜂窝状金属高速压缩试验方法(中英文版)
Metallic materials—Ductility testing—High speed compression test for porous and cellular metals
GB/T 5522-2008
粮油检验 粮食、油料的过氧化氢酶活动度的测定(中英文版)
Inspection of grains and oils - Determination of hydrogen peroxidase activity of grain and oilseeds
GB/T 41750-2022
钛及钛合金方形和矩形管材(中英文版)
Titanium and titanium alloy square and rectangular tubes
GB/T 2423.19-2013
环境试验 第2部分:试验方法 试验Kc:接触点和连接件的二氧化硫试验(中英文版)
Environmental testing - Part 2: Test methods - Test Kc: Sulphur dioxide test for contacts and connections
GB/T 33103-2016
氧化铝型硫磺回收催化剂活性试验方法(中英文版)
Test method of activity for alumium oxide type sulfur recovery catalyst
GB/T 41053-2021
全断面隧道掘进机 土压平衡-泥水平衡双模式掘进机(中英文版)
Full face tunnel boring machine—Dual modes (earth pressure balanced and slurry balanced) tunnel boring machine
GB/T 2828.10-2010
计数抽样检验程序 第10部分:GB/T 2828计数抽样检验系列标准导则(中英文版)
Sampling procedures for inspection by attributes - Part 10: Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes
GB/T 1621-2008
工业氯化铁(中英文版)
Ferric chloride for industrial use
GB/T 5169.15-2015
电工电子产品着火危险试验 第15部分:试验火焰 500W火焰 装置和确认试验方法(中英文版)
Fire hazard testing for electric and electronic products—Part 15: Test flames—500W flames—Apparatus and confirmational test methods
GB/T 18908.1-2002
工业用时间继电器 第1部分:要求和试验(中英文版)
Specified time relays for industrial use--Part 1:Requirements and tests
GB/T 39597-2020
出租汽车综合服务区规范(中英文版)
Specification for taxi integrated service area
GB 15629.1104-2006
信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分:无线局域网媒体访问控制和物理层规范:2.4GHz频段更高数据速率扩展规范(中英文版)
Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Further Higher
GB 28478-2012
户外休闲家具安全性能要求 桌椅类产品(中英文版)
General safety requirements of outdoor leisure furniture - Seating and tables
GB 16210-1996
车间空气中镍及其无机化合物卫生标准(中英文版)
Health standard for nickel and its inorganic compounds in the air of workplace
GB/T 36992-2019
手动牙间刷(中英文版)
Manual interdental brushes
GB/T 13255.6-2009
工业用己内酰胺试验方法 第6部分:酸度或碱度的测定(中英文版)
Test methods of caprolactam for industrial use - Part 6: Determination of acidity or alkalinity
GB/T 43896-2024
金属材料-超高周疲劳-超声疲劳试验方法(中英文版)
Metallic materials - Ultra-high cycle fatigue - Ultrasonic fatigue test methods
GB/T 2981-2014
工业车辆充气轮胎技术条件(中英文版)
Technical specification of pneumatic tyres for industrial vehicles
GB/T 36818-2018
冷杉枯梢病菌检疫鉴定方法(中英文版)
Detection and identification of Gremmeniella abietina (Lagerberg) Morelet
GB/T 42860-2023
运载火箭运输通用要求(中英文版)
General requirements for launch vehicle transportation
GB/Z 26584-2011
生姜生产技术规范(中英文版)
Production technical practice for ginger
GB/T 22044-2008
婴幼儿服装用人体测量的部位与方法(中英文版)
Location and method of infants’anthropometric surveys for garments
GB/T 7676.4-2017
直接作用模拟指示电测量仪表及其附件 第4部分:频率表的特殊要求(中英文版)
Direct acting indicating analogue electrical measuring instruments and their accessories—Part 4:Special requirements for frequency meters
GB/T 5009.164-2003
大米中丁草胺残留量的测定(中英文版)
Determination of butachlor residues in rice
GB 2797-2008
灯头总技术条件(中英文版)
Technical specification for lamp caps
GB/T 20806-2022
饲料中中性洗涤纤维(NDF)的测定(中英文版)
Determination of neutral detergent fiber (NDF) in feed
GB/T 20671.9-2006
非金属垫片材料分类体系及试验方法 第9部分: 软木垫片材料胶结物耐久性试验方法(中英文版)
Classification system and test methods for nonmetallic gasket materials - Part 9: Standard test method for binder durability of cork composition gasket materials
GB 4789.26-2013
食品安全国家标准 食品微生物学检验 商业无菌检验(中英文版)
National Food Safety Standard-Microbiological examination of food - Commercial sterility test
GB/T 16683-1996
信息交换用彝文字符24×24点阵字模集及数据集(中英文版)
24×24 Dot matrix font set and data set of Yi character for information interchange
GB 4094-2016
汽车操纵件、指示器及信号装置的标志(中英文版)
Symbols for controls, indicators and tell-tales of motor vehicles
GB/T 39949.1-2021
液压传动 单杆缸附件的安装尺寸 第1部分:16MPa中型系列和25MPa系列(中英文版)
Hydraulic fluid power—Mounting dimensions for accessories of single rod cylinder—Part 1:16 MPa medium and 25 MPa series
GB 25466-2010
铅、锌工业污染物排放标准(中英文版)
Emission Standard of Pollutants from Lead and Zink Industry
GB/T 32425-2015
通信产品环境意识设计导则(中英文版)
Guide of environmental consciousdesign for communication products
GB/T 38758-2020
气动 有色金属缸筒技术要求(中英文版)
Pneumatic fluid power—Rules of non-ferrous metallic cylinder body
GB/T 28856-2012
硅压阻式压力敏感芯片(中英文版)
Silicon piezoresistive pressure-sensitive chip
GB 9254-2008
信息技术设备的无线电骚扰限值和测量方法(中英文版)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
GB/T 37857-2019
聚乳酸热成型一次性验尿杯(中英文版)
Thermoforming disposable urine cup made by polylactic acid
GB/T 17980.135-2004
农药 田间药效试验准则(二) 第135部分:除草剂防治草莓地杂草(中英文版)
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 135:Herbicides against weeds in strawberry
GB/T 24281-2009
纺织品 有机挥发物的测定 气相色谱-质谱法(中英文版)
Textiles - Determination of volatile organic compounds - Gas chromatography/mass spectrography
GB/T 15566.3-2007
公共信息导向系统 设置原则与要求 第3部分:铁路旅客车站(中英文版)
Guidance system for public information - Setting principles and requirements - Part 3: Railway passenger station
GB 50408-2015
烧结厂设计规范(中英文版)
Code for design of sintering plant
GB/T 5900.3-1997
机床 主轴端部与花盘 互换性尺寸 第3部分:卡口型(中英文版)
Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 3:Bayonet type
GB/T 36122-2018
市政消防给水设施维护管理(中英文版)
Maintenance and management of municipal fire water supply facilities
GB/T 13150-2005
半导体器件 分立器件 电流大于 100A、环境和管壳额定的双向三极晶闸管空白详细规范(中英文版)
Semiconductor devices Discret devices Blank detail specification for bidirectional triode thyristors(triacs),ambient and case-rated,for currents greater than 100A
GB/Z 43078-2023
液压传动连接 螺柱端可调管接头的安装指导(中英文版)
Hydraulic Transmission Connections Installation Instructions for Stud-End Adjustable Pipe Couplings
GB/T 26804.4-2011
工业控制计算机系统 功能模块模板 第4部分:模拟量输入输出通道模板性能评定方法(中英文版)
Industrial control computer system - Function module - Part 4: Methods of evaluating the performance for analogue input/output channel module
GB/T 34500.4-2017
稀土废渣、废水化学分析方法 第4部分:铜、锌、铅、铬、镉、 钡、钴、锰、镍、钛量的测定 电感耦合等离子体原子发射光谱法(中英文版)
Chemical analysis methods for rare earth waste residue and waste water—Part 4: Determination of copper, zinc, lead, chromium, cadmium, barium, cobalt, manganese, nickel and titanium contents—Inductively coupled plasma emission spectrometry
GB/T 22885-2008
皮革 色牢度试验 耐水色牢度(中英文版)
Leather - Tests for colour fastness - Colour fastness to water
GB/T 18998.1-2022
工业用氯化聚氯乙烯(PVC-C)管道系统 第1部分:总则(中英文版)
Chlorinated polyvinyl chloride (PVC-C) piping systems for industrial use - Part 1: General

找到:57335條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [458] [459] [460] [461] [462] [463] [464]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved