中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 21782.9-2010 粉末涂料 第9部分:取样(中英文版) Coating powders - Part 9:Sampling |
![]() |
|
![]() |
GB/T 15453-2018 工业循环冷却水和锅炉用水中氯离子的测定(中英文版) Determination of chloride in water for industrial circulating cooling system and boiler |
![]() |
|
![]() |
GB/T 43119-2023 自动驾驶封闭测试场地建设技术要求(中英文版) Technical requirements for the construction of closed test sites for autonomous driving |
![]() |
|
![]() |
GB/Z 28818-2012 高电压下户外用聚合物材料的选用导则(中英文版) Selection guide for polymeric materials for outdoor use under HV stress |
![]() |
|
![]() |
GB/T 34491-2017 烧结钕铁硼表面镀层(中英文版) Coatings for sintered neodymium iron boron permanent magnets |
![]() |
|
![]() |
GB/T 17035-1997 电子设备用固定电阻器 第4部分:空白详细规范 带散热器的功率型固定电阻器 评定水平H(中英文版) Fixed resistors for use in electronic equipment--Part 4:Blank detailspecification--Fixed power resistors, heat-sink types--Assessment level H |
![]() |
|
![]() |
GB/T 20042.3-2022 质子交换膜燃料电池 第3部分:质子交换膜测试方法(中英文版) Proton exchange membrane fuel cell—Part 3: Test method for proton exchange membrane |
![]() |
|
![]() |
GB/T 23927-2009 三轮汽车和低速货车 机械式变速器(中英文版) Tri-wheel vehicles and low-speed goods vehicles - Mechanical transmissions |
![]() |
|
![]() |
GB/T 19981.1-2014 纺织品 织物和服装的专业维护、干洗和湿洗 第1部分: 清洗和整烫后性能的评价(中英文版) Textiles—Professional care, drycleaning and wetcleaning of fabrics and garments—Part 1: Assessment of performance after cleaning and finishing |
![]() |
|
![]() |
GB/T 4219.1-2008 工业用硬聚氯乙烯(PVC-U)管道系统 第1部分:管材(中英文版) Plastics piping system for industrial applications - Unplasticized poly(vinyl chloride)(PVC-U) - Specifications for components and the system - Part 1: Pipes |
![]() |
|
![]() |
GB/T 35537-2017 高通量基因测序结果评价要求(中英文版) Requirements of the high-throughput gene sequencing result evaluation |
![]() |
|
![]() |
GB/T 19260-2003 低地板及低入口城市客车结构要求(中英文版) Structure requirements of low floor city-bus and low entry city-bus |
![]() |
|
![]() |
GB/T 3771-1983 铜合金硬度与强度换算值(中英文版) Conversion of hardness and strength for copper alloys |
![]() |
|
![]() |
GB/T 40096.5-2021 就地化继电保护装置技术规范 第5部分:线路保护(中英文版) Technical specification for on-site protection equipment - Part 5: Line protection |
![]() |
|
![]() |
GB/T 11592-2011 公用数据网上起/止传输业务使用的数据终端设备(DTE)和数据电路终接设备(DCE)间的接口(中英文版) Interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) for start-stop transmission services on public data networks |
![]() |
|
![]() |
GB/T 19016-2005 质量管理体系 项目质量管理指南(中英文版) Quality management systems -- Guidelines for quality management in projects |
![]() |
|
![]() |
GB/T 32553-2016 萤石 取样和制样精密度的试验方法(中英文版) Fluorspar—Method of determining the precision of sampling and sample preparation |
![]() |
|
![]() |
GB/T 39056-2020 古建筑砖石结构维修与加固技术规范(中英文版) Technical code for maintenance and strengthening of masonry structures on ancient buildings |
![]() |
|
![]() |
GB/T 22803-2008 制鞋纸板(中英文版) Shoe board |
![]() |
|
![]() |
GB 7808-1987 职业性黑变病诊断标准及处理原则(中英文版) Diagnostic criteria and principles of management of occupational melanosis |
![]() |
|
![]() |
GB 30080-2013 铜及铜合金熔铸安全生产规范(中英文版) Safe production specifications for copper and copper alloy melting and casting |
![]() |
|
![]() |
GB/T 26507-2019 石油天然气钻采设备 地面油气混输泵(中英文版) Petroleum drilling and production equipment—Ground oil-gas transportation pump |
![]() |
|
![]() |
GB/T 5772-2010 柴油机喷油嘴偶件 技术条件(中英文版) Injector nozzle for diesel - Specifications |
![]() |
|
![]() |
GB/T 21989-2008 塑料 聚氯乙烯糊 用Severs流变仪测定表观黏度(中英文版) Plastics - Poly(vinyl chloride)pastes - Determination of apparent viscosity using the severs rheometer |
![]() |
|
![]() |
GB/T 37119-2018 自发地理信息收集处理规范(中英文版) Specification for collecting and processing Volunteered geographic information |
![]() |
|
![]() |
GB/T 2674-2004 内六角花形半沉头螺钉(中英文版) Hexalobular socket raised countersunk head screws |
![]() |
|
![]() |
GB/T 29418-2023 塑木复合材料挤出型材性能测试方法(中英文版) Test method for performance of wood-plastic composite extruded profiles |
![]() |
|
![]() |
GB/T 29188-2012 品牌评价 多周期超额收益法(中英文版) Brand valuation - Multi-cycle excess earnings method |
![]() |
|
![]() |
GB/T 4842-2006 氩(中英文版) Argon |
![]() |
|
![]() |
GB/T 34755-2017 家庭牧场生产经营技术规范(中英文版) Specification of production and management for household ranch |
![]() |
|
![]() |
GB/T 24721.3-2023 公路用玻璃纤维增强塑料产品 第3部分:管道(中英文版) Glass fiber reinforced plastic products for road use - Part 3: Pipes |
![]() |
|
![]() |
GB/T 24258-2009 石油天然气工业 技术规范的内容与编写(中英文版) Petroleum and natural gas industries - Content and drafting of a technical specification |
![]() |
|
![]() |
GB/T 33515-2017 磁粉离合器(中英文版) Magnetic particle clutch |
![]() |
|
![]() |
GB/T 40536-2021 航天器剩余推进剂排放设计要求(中英文版) Design requirements for residual propellant venting of Spacecraft |
![]() |
|
![]() |
GB/T 26973-2011 空气源热泵辅助的太阳能热水系统(储水箱容积大于0.6m3)技术规范(中英文版) Specification of solar water heating systems assisted with air-source heat pump(for capacity of water tank more than 0.6 m3) |
![]() |
|
![]() |
GB/T 32819-2016 土方机械 零部件可回收利用性分类及标识(中英文版) Earth-moving machinery—Classification and marking for recoverability of components |
![]() |
|
![]() |
GB/T 13964-2008 照相机械术语(中英文版) Photographic machinery - Vocabulary |
![]() |
|
![]() |
GB/T 40903-2021 纺织品 DNA分析法鉴别某些特种动物纤维 山羊绒、绵羊毛、牦牛绒及其混合物(中英文版) Textiles—Identification of some animal fibres by DNA analysis method—Cashmere,wool,yak and their blends |
![]() |
|
![]() |
GB 2099.4-2008 家用和类似用途插头插座 第2部分:固定式无联锁带开关插座的特殊要求(中英文版) Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for switched socket-outlets without interlock for fixed installations |
![]() |
|
![]() |
GB/T 16494-2013 化学试剂 二甲苯(中英文版) Chemical reagent—Xylene |
![]() |
|
![]() |
GB/T 6373-2007 表面活性剂 表观密度的测定(中英文版) Surface active agents - Determination of apparent density |
![]() |
|
![]() |
GB/T 21714.3-2015 雷电防护 第3部分:建筑物的物理损坏和生命危险(中英文版) Protection against lightning—Part 3:Physical damage to structures and life hazard |
![]() |
|
![]() |
GB/T 18993.3-2020 冷热水用氯化聚氯乙烯(PVC-C)管道系统 第3部分:管件(中英文版) Chlorinated poly (vinyl chloride) (PVC-C) piping systems for hot and cold water installations—Part 3:Fittings |
![]() |
|
![]() |
GB 25490-2010 木工机床安全 带移动工作台单头开榫机(中英文版) Safety of woodworking machines - Single end tenoning machines with sliding table |
![]() |
|
![]() |
GB/T 50123-1999 土工试验方法标准(中英文版) Standard for test merhods of earthworks |
![]() |
|
![]() |
GB/T 37122-2018 无损检测-工业计算机层析成像(CT)-检测用最大可检测钢厚度测试卡(中英文版) Non-destructive testing—Phantom of maximum detectable steel thickness for industrial computed tomography(CT) |
![]() |
|
![]() |
GB/T 43618-2023 无损检测 工艺塔伽马射线扫描方法(中英文版) Non-destructive testing process tower gamma ray scanning method |
![]() |
|
![]() |
GB/T 29312-2012 低压无功功率补偿投切装置(中英文版) Low-voltage reactive power compensation switchgear component |
![]() |
|
![]() |
GB/T 6730.1-1986 铁矿石化学分析方法 分析用预干燥试样的制备(中英文版) Methods for chemical analysis of iron ores--Preparation of predried test samples for chemical analysis |
![]() |
|
![]() |
GB/T 11048-2018 纺织品 生理舒适性 稳态条件下热阻和湿阻的测定(蒸发热板法)(中英文版) Textiles-Physiological effects-Measurement of thermal and water-vapour resistance under steady-state conditions(sweating guarded-hotplate test) |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [460] [461] [462] [463] [464] [465] [466] |