中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 1174-2022 铸造轴承合金(中英文版) Cast bearing alloy |
|||
GB/T 17249.1-1998 声学 低噪声工作场所设计指南 噪声控制规划(中英文版) Acoustics--Guidelines for the design of low-noise workplaces--Noise control strategies |
|||
GB/T 28124-2011 惰性气体中微量氢、氧、甲烷、一氧化碳的测定 气相色谱法(中英文版) Determination of trace hydrogen,oxygen,methane and carbon monoxide in the inert gases - Gas chromatographic method |
|||
GB/T 14213-2008 初始图形交换规范(中英文版) The initial graphics exchange specification(IGES) |
|||
GB 31604.6-2016 食品安全国家标准 食品接触材料及制品 树脂中灼烧残渣的测定(中英文版) National Food Safety Standard-Food contact materials and products-DETERMINATION OF RESIDUES FROM RESIN IN RESINS |
|||
GB/T 40571-2021 智能服务 预测性维护 通用要求(中英文版) Intelligent service—Predictive maintenance—General requirements |
|||
GB/T 10924-2009 闭式单、双点压力机 精度(中英文版) Straight sided single or two - Point mechanical power presses - Testing of the accuracy |
|||
GB/T 10403-2007 多极和双通道感应移相器通用技术条件(中英文版) General specification for multipolar and two-speed induction phase shifters |
|||
GB 6771-2000 电力机车防火和消防措施的规程(中英文版) Regulations relating to fire preventive and fighting measures for electric locomotives |
|||
GB/T 5019.5-2014 以云母为基的绝缘材料 第5部分:电热设备用云母板(中英文版) Insulating materials based on mica―Part 5: Rigid mica materials for heating equipment |
|||
GB/T 18256-2015 钢管无损检测 用于确认无缝和焊接钢管(埋弧焊除外)水压密实性的自动超声检测方法(中英文版) Non-destructive testing of steel tubes—Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness |
|||
GB/T 14206-2005 玻璃纤维增强聚酯波纹板(中英文版) Corrugated sheets of glass fiber reinforced plastics |
|||
GB/T 39315.3-2020 军民通用资源 数据模型 第3部分:器材类 航材(中英文版) General resource of military and civilian—Data model—Part 3:Equipment—Aviation repair parts |
|||
GB/T 26267-2010 反垃圾电子邮件设备技术要求(中英文版) Technical requirement for anti-spam email equipment |
|||
GB/T 37281-2019 废铅酸蓄电池回收技术规范(中英文版) Technical specification for recycling waste lead acid battery |
|||
GB/T 13823.20-2008 振动与冲击传感器校准方法 加速度计谐振测试 通用方法(中英文版) Methods for the calibration of vibration and shock pick-ups - Accelerometer resonance testing - General methods |
|||
GB/T 20715-2024 犊牛代乳粉(中英文版) Determination of trimethoprim, trimethoprim and trimethoprim in feed |
|||
GB/T 16598-2013 钛及钛合金饼和环(中英文版) Titanium and titanium alloy dics and ring |
|||
GB/T 35972-2018 供暖与空调系统节能调试方法(中英文版) Energy-saving commissioning method of heating and air conditioning system |
|||
GB/T 14092.2-2023 机械产品环境条件 第2部分:寒冷(中英文版) Environmental conditions for mechanical products - Part 2: Cold |
|||
GB 50612-2010 冶金矿山选矿厂工艺设计规范(中英文版) Code for technological design of metallurgical concentrator |
|||
GB/T 15575-2008 钢产品标记代号(中英文版) Steel products standard designation |
|||
GB/T 1602-2001 农药熔点测定方法(中英文版) Testing method of melting point for pesticides |
|||
GB/T 33863.1-2017 OPC统一架构 第1部分:概述和概念(中英文版) OPC unified architecture—Part 1: Overview and concepts |
|||
GB/T 15105.1-2006 模压刨花制品 第1部分:室内用(中英文版) Molding articles from wood particle Part 1: Interior use |
|||
GB 21341-2022 铁合金单位产品能源消耗限额(中英文版) Energy consumption quota per unit product of ferroalloy |
|||
GB 50777-2012 ±800KV及以下换流站构支架施工及验收规范(中英文版) Code for construction and acceptance of frame works in converter station at ±800KV and below |
|||
GB/T 33225-2016 风力发电机组 基于机舱风速计法的功率特性测试(中英文版) Electricity producing wind turbines—Power performance measurements based on nacelle anemometry |
|||
GB/T 2449.1-2021 工业硫磺 第1部分:固体产品(中英文版) Sulphur for industrial use—Part 1: Solid product |
|||
GB/T 11211-2009 硫化橡胶或热塑性橡胶 与金属粘合强度的测定 二板法(中英文版) Rubber, vulcanized or thermoplastic - Determination of adhesion to metal - Two-plate method |
|||
GB 31144-2014 木工机床安全 手动式摇臂锯(中英文版) Safety of woodworking machines―Manual radial arm saws |
|||
GB/T 32172-2015 基于ebXML不可撤销跟单信用证申请书报文(中英文版) ebXML based messages of irrevocable documentary credit application |
|||
GB/T 9966.1-2020 天然石材试验方法 第1部分:干燥、水饱和、冻融循环后压缩强度试验(中英文版) Test methods for natural stone--Part 1: Determination of dry, wet and after freezing compressive strength |
|||
GB 11502-1989 职业性白内障诊断标准及处理原则(中英文版) Diagnostic criteria and principles of management of occupational cataract |
|||
GB 16715.3-2010 瓜菜作物种子 第3部分:茄果类(中英文版) Seed of gourd and vegetable crops - Part 3:Solanaceous fruits |
|||
GB/T 11991-2008 离子交换树脂转型膨胀率测定方法(中英文版) Determination of reversible swelling of exchange resins |
|||
GB/T 7635.1-2002 全国主要产品分类与代码 第1部分:可运输产品(中英文版) National central product classification and code--Part 1:Transportable product |
|||
GB/T 37591-2019 700MW及以上级大电机用冷轧无取向电工钢带(中英文版) Cold-rolled non-grain oriented electrical steel strip specialized for large generators with power of 700MW or higher |
|||
GB/T 22509-2008 动植物油脂 苯并(a)芘的测定 反相高效液相色谱法(中英文版) Animal and vegetable fats and oils - Determination of benzo(a)pyrene - Reverse-phase high performance liquid chromatography method |
|||
GB/T 328.1-2007 建筑防水卷材试验方法 第1部分:沥青和高分子防水卷材 抽样规则(中英文版) Test methods for building sheets for waterproofing - Part 1: Bitumen,plastic and rubber sheets for waterproofing-rules for sampling |
|||
GB/T 44092-2024 体育公园配置要求(中英文版) Sports park configuration requirements |
|||
GB/T 29832.3-2013 系统与软件可靠性 第3部分:测试方法(中英文版) Reliability of system and software - Part 3: Testing method |
|||
GB/T 36291.1-2018 电力安全设施配置技术规范 第1部分:变电站(中英文版) Regulation for safety facilities configuration of electric power industry—Part 1: Substation |
|||
GB/T 29465-2023 浮头式热交换器用法兰(中英文版) Flange for floating head heat exchanger |
|||
GB/T 17303.1-2010 发票报文 第1部分:联合国标准发票报文(中英文版) Invoice message - Part 1: United nations standard invoice message |
|||
GB/T 7493-1987 水质 亚硝酸盐氮的测定 分光光度法(中英文版) Water quality--Determination of nitrogen(nitrite)--Spectrophotometric method |
|||
GB/T 3325-2017 金属家具通用技术条件(中英文版) General technical requirements for metal furniture |
|||
GB/T 41366-2022 畜禽肉品质检测 水分、蛋白质、脂肪含量的测定 近红外法(中英文版) Livestock and poultry meat quality detection Determination of moisture, protein and fat content Near infrared method |
|||
GB/T 28416-2012 人工大气中的腐蚀试验 交替暴露在腐蚀性气体、中性盐雾及干燥环境中的加速腐蚀试验(中英文版) Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying |
|||
GB/T 12001.1-2008 塑料 未增塑聚氯乙烯模塑和挤出材料 第1部分:命名系统和分类基础(中英文版) Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 1: Designation system and basis for specifications |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [475] [476] [477] [478] [479] [480] [481] |