网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 22633-2008
住宅部品术语(中英文版)
Terms of housing parts
GB/T 11461-2013
频谱分析仪通用规范(中英文版)
General specification for spectrum analyzer
GB/T 32078.4-2015
船舶与海上技术 船用呼吸器 第4部分:符合IMO IBC及IGC规则要求的自给式紧急逃生呼吸器(中英文版)
Ships and marine technology—Breathing apparatus for ships—Part 4:Self-contained breathing apparatus for emergency escape required by the IMO IBC and IGC Codes for shipboard use
GB/T 20996.3-2020
采用电网换相换流器的高压直流系统的性能 第3部分:动态(中英文版)
Performance of high-voltage direct current (HVDC) systems with line-commutated converters—Part 3: Dynamic conditions
GB/T 15924-2010
锡矿石化学分析方法 锡量测定(中英文版)
Method for chemical analysis of tin ores - Determination of tin content
GB/T 18932.11-2002
蜂蜜中钾、磷、铁、钙、锌、铝、钠、镁、硼、锰、铜、钡、钛、钒、镍、钴、铬含量的测定方法 电感耦合等离子体原子发射光谱(ICP-AES)法(中英文版)
Method for the determination of potassium,phosphorus,iron,calcium,zinc,aluminium,sodium,magnesium,boron,manganese,copper,barium,titanium,vanadium,nickel,cobalt,chromium contents in honey--Inductively coupled plasma atomic e
GB 5920-2019
汽车及挂车前位灯、后位灯、示廓灯和制动灯配光性能(中英文版)
Photometric characteristics of front and rear position lamps, end-outline marker lamps and stop lamps for motor vehicles and their trailers
GB/T 43971-2024
遥感器定标用积分球光源测试规范(中英文版)
Integrating sphere light source test specifications for remote sensor calibration
GB/T 28788-2012
公路地理信息数据采集与质量控制(中英文版)
Road geography data collection and quality control
GB/T 1028-2018
工业余能资源评价方法(中英文版)
Industrial surplus energy resources evaluation methods
GB/T 4117-2008
工业用二氯甲烷(中英文版)
Methylene chloride for industrial use
GB/T 6150.4-2023
钨精矿化学分析方法 第4部分:硫含量的测定 高频感应红外吸收法和燃烧-碘量法(中英文版)
Chemical analysis methods for tungsten concentrates Part 4: Determination of sulfur content High-frequency induction infrared absorption method and combustion-iodometric method
GB/T 24153-2009
橡胶及弹性体材料 N-亚硝基胺的测定(中英文版)
Rubber and elastomer materials - Determination of N-nitrosamines
GB 51110-2015
洁净厂房施工及质量验收规范(中英文版)
Code of construction and quality acceptance of industrial cleanroom
GB/T 13577-2006
开放式炼胶机炼塑机(中英文版)
Mill for rubber and plastics
GB 34169-2017
商品煤质量 民用散煤(中英文版)
Commercial coal quality—Civil bulk coal
GB/T 42022-2022
精油 水分含量的测定 卡尔费休法(中英文版)
Essential oils - Determination of water content - Karl Fischer method
GB/T 1711-1989
颜料在烘干型漆料中热稳定性的比较(中英文版)
Comparison of heat stability of pigments in stoving medium
GB/T 28003-2011
城市中央休闲区服务质量规范(中英文版)
Standard of service quality specifications of central recreation district
GB/T 33373-2016
防腐蚀 电化学保护 术语(中英文版)
Anticorrision—Electrochemical protection—Terminology
GB/T 5009.92-2003
食品中钙的测定(中英文版)
Determination of calcium in foods
GB/T 39828-2021
陶瓷厚涂层的高温弹性模量试验方法(中英文版)
Test method for determining elastic modulus of thick ceramic coating at elevated temperature
GB/T 23162-2008
运动器材标准编写要求(中英文版)
Standard compiling requirements of sport equipment
GB/T 30381-2013
桂皮(中英文版)
Cassia
GB/T 21562.2-2015
轨道交通 可靠性、可用性、可维护性和安全性规范及示例 第2部分:安全性的应用指南(中英文版)
Railway applications—Specification and demonstration of reliability,availability,maintainability and safety(RAMS)—Part 2: Guide to the application for safety
GB/T 4193-1984
电真空器件及电光源用细钨丝、钼丝和薄带密度的测试方法(中英文版)
Method for measuring the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and vacuumtubes
GB/T 38787-2020
塑料 材料生物分解试验用样品制备方法(中英文版)
Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials
GB/T 2943-2008
胶粘剂术语(中英文版)
Terms of adhesive
GB/T 25617-2010
土方机械 机器操作的可视显示装置(中英文版)
Earth-moving machinery - Visual display of machine operation
GB/T 2900.45-2006
电工术语 水电站水力机械设备(中英文版)
Electrotechnical terminology - Hydroelectric powerplant machinery
GB/T 37774-2019
滑动轴承 可倾瓦块轴承瓦块材料(中英文版)
Plain bearings—Pad materials for tilting pad bearings
GB/T 17739.6-2012
技术图样与技术文件的缩微摄影 第6部分:35mm缩微胶片放大系统的质量准则和控制(中英文版)
Microfilming of technical drawings and other drawing office documents - Part 6: Quality criteria and control of systems for enlargements from 35mm microfilm
GB/T 2077-1987
硬质合金可转位刀片圆角半径(中英文版)
Indexable hardmetal (carbide) inserts--Corner radii
GB/T 36173-2018
球墨铸铁管线用自锚接口系统 设计规定和型式试验(中英文版)
Restrained joint systems for ductile iron pipelines—Design rules and type testing
GB/T 19468-2004
烟火药剂中氯酸盐含量的测定(中英文版)
Determination of chlorates content in pyrotechnic composition
GB/T 43223-2023
空间物体轨道数据规范(中英文版)
Space object orbit data specifications
GB/T 24404-2009
化妆品中需氧嗜温性细菌的检测和计数法(中英文版)
Enumeration and detection of aerobic mesophilic bacteria in cosmetics
GB/T 14109-1993
电视、调频广播场强测量方法(中英文版)
Measurement method of TV,FM broadcasting field strength
GB/T 15076.1-2017
钽铌化学分析方法 第1部分:铌中钽量的测定 电感耦合等离子体原子发射光谱法(中英文版)
Methods for chemical analysis of tantalum and niobium—Part 1: Determination of tantalum content in niobium—Inductively coupled plasma atomic emission spectrometry
GB/T 41479-2022
信息安全技术 网络数据处理安全要求(中英文版)
Information security technology network data processing security requirements
GB/T 8718-2008
炭素材料术语(中英文版)
The terms of carbon materials
GB 27550-2011
气瓶充装站安全技术条件(中英文版)
Safety specification for filling station of gas cylinders
GB/T 35657-2017
化学分析方法验证确认和内部质量控制实施指南 基于样品消解的金属组分分析(中英文版)
Guideline for verification and validation of chemical analysis method and internal quality control-Metal component analysis based on sample digestion
GB/T 21150-2007
失速型风力发电机组(中英文版)
stall regulation wind turbine generator system
GB/T 40260-2021
高分子膜材料气体渗透性能测试方法(中英文版)
Test method for determining gas permeability of polymer membrane materials
GB/T 12677-1990
汽车技术状况行驶检查方法(中英文版)
Motor vehicles--Technical condition--Inspection method
GB/T 23179-2008
饲料毒理学评价 亚急性毒性试验(中英文版)
Feed toxicology evaluation - Subacute toxicity test
GB/T 30473-2013
涂附磨具 筒形砂套(中英文版)
Coated abrasives―Cylindrical abrasive sleeves
GB/T 17626.17-2005
电磁兼容 试验和测量技术 直流电源输入端口纹波抗扰度试验(中英文版)
Electromagnetic compatibility Testing and measurement techniques Ripple on d.c.input power port immunity test
GB/T 2775-2016
电子设备用电容器和电阻器 轴端、轴套和单孔轴套安装及轴控电子元件的优选尺寸(中英文版)
Capacitors and resistors for use in electronic equipment—Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components

找到:57335條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [548] [549] [550] [551] [552] [553] [554]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved