中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 26795-2011 数控定量水表(中英文版) Numerical batch control water meter |
![]() |
|
![]() |
GB/T 13561.6-2006 港口连续装卸设备安全规程 第6部分:连续装卸机械(中英文版) Safety rules for port’s continuous handling equipment - Part 1: continuous handling mechanism |
![]() |
|
![]() |
GB/T 15544.4-2017 三相交流系统短路电流计算 第4部分:同时发生两个独立单相接地故障时的电流以及流过大地的电流(中英文版) Short-circuit current calculation in three-phase a.c.systems—Part 4: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth |
![]() |
|
![]() |
GB/T 22866-2008 皮革五金配件 镍释放量的测定(中英文版) Leather hardware accessory - Determination of release of nickel |
![]() |
|
![]() |
GB/T 40336-2021 无损检测 泄漏检测 气体参考漏孔的校准(中英文版) Non-destructive testing—Leak testing—Calibration of reference leaks for gases |
![]() |
|
![]() |
GB/T 30127-2013 纺织品 远红外性能的检测和评价(中英文版) Textiles―Testing and evaluation for far infrared radiation properties |
![]() |
|
![]() |
GB/T 32644-2016 平板显示器基板玻璃化学耐久性的试验方法(中英文版) Test method for chemical durability of flat panel display glass substrates |
![]() |
|
![]() |
GB 7300.1001-2020 饲料添加剂 第10部分:调味和诱食物质 谷氨酸钠(中英文版) Feed additive—Part 10:Flavouring and appetising substances—Sodium glutamate |
![]() |
|
![]() |
GB/T 18402-2001 纸浆滤水性能的测定(滤水时间法)(中英文版) Pulps--Determination of drainability (drainge time method) |
![]() |
|
![]() |
GB/T 25295-2010 电气设备安全设计导则(中英文版) Guidelines on safety designs for electric equipments |
![]() |
|
![]() |
GB/T 31500-2015 信息安全技术 存储介质数据恢复服务要求(中英文版) Information security technology—Requirement of data recovery service for storage media |
![]() |
|
![]() |
GB/T 23711.7-2019 塑料衬里压力容器试验方法 第7部分:泄漏试验(中英文版) Test method for pressure vessels lined with plastics—Part 7:Leakage testing |
![]() |
|
![]() |
GB/T 2979-2008 农业轮胎规格、尺寸、气压与负荷(中英文版) Size desination,dimensions,inflation pressure and load capacity for agricultural tyres |
![]() |
|
![]() |
GB 50286-2013 堤防工程设计规范(中英文版) Code for design of levee project |
![]() |
|
![]() |
GB/T 11026.3-2006 电气绝缘材料 耐热性 第3部分:计算耐热特征参数的规程(中英文版) Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics |
![]() |
|
![]() |
GB/T 34691.1-2018 塑料-热塑性聚酯(TP)模塑和挤出材料-第1部分:命名系统和分类基础(中英文版) Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 1:Designation system and basis for specifications |
![]() |
|
![]() |
GB/T 305-2019 滚动轴承 向心轴承止动槽和止动环 尺寸、产品几何技术规范(GPS)和公差值(中英文版) Rolling bearings-Snap ring grooves and snap rings for radial bearings-Dimensions,geometrical product specifications (GPS) and tolerance values |
![]() |
|
![]() |
GB/T 8704.7-2009 钒铁 磷含量的测定 钼蓝分光光度法(中英文版) Ferrovanadium - Determination of phosphorus content - The molybdenum blue photometric method |
![]() |
|
![]() |
GB/T 43418-2023 亚麻纤维组成成分的检测方法(中英文版) Method for testing the composition of flax fiber |
![]() |
|
![]() |
GB/T 34940.1-2017 静态切换系统(STS) 第1部分:总则和安全要求(中英文版) Static transfer systems(STS)—Part 1: General and safety requirements |
![]() |
|
![]() |
GB/T 42158-2023 微机电系统(MEMS)技术 微沟槽和棱锥式针结构的描述和测量方法(中英文版) Micro-Electro-Mechanical Systems (MEMS) Technology-Description and Measurement Methods of Micro-grooves and Pyramidal Needle Structures |
![]() |
|
![]() |
GB/T 18832-2002 箱式、立柱式托盘(中英文版) Box pallet and post pallet |
![]() |
|
![]() |
GB/T 28017-2011 耐压式计量给煤机(中英文版) Pressure mode weighing coal feeder |
![]() |
|
![]() |
GB/T 11738-1989 居住区大气中甲醇、丙酮卫生检验标准方法 气相色谱法(中英文版) Standard methodfor hygienic examination of methanol and acetone in air of residential areas--Gas chromatography |
![]() |
|
![]() |
GB/T 33592-2017 分布式电源并网运行控制规范(中英文版) Specification of operation and controlling for distributed resources connected to power grid |
![]() |
|
![]() |
GB 17498.6-2008 固定式健身器材 第6部分:跑步机 附加的特殊安全要求和试验方法(中英文版) Stationary training equipment - Part 6: Treadmills - Additional specific safety requirements and test methods |
![]() |
|
![]() |
GB/T 13789-2022 用单片测试仪测量电工钢带(片)磁性能的方法(中英文版) Method for Measuring Magnetic Properties of Electrical Steel Strip (Sheet) with Single Chip Tester |
![]() |
|
![]() |
GB/T 908-2008 锻制钢棒尺寸、外形、重量及允许偏差(中英文版) Forged bars - Dimensions, shape, weight and tolerances |
![]() |
|
![]() |
GB/T 11446.5-2013 电子级水中痕量金属的原子吸收分光光度测试方法(中英文版) Test method for measuring trace metals in electronic grade water by atomic absorption spectrophotometry |
![]() |
|
![]() |
GB 1886.212-2016 食品安全国家标准 食品添加剂 酪蛋白酸钠(又名酪朊酸钠)(中英文版) National Food Safety Standard - Food Additives - Casein sodium (also known as casein sodium) |
![]() |
|
![]() |
GB/T 21151-2007 煤矿用轴流主通风机 技术条件(中英文版) Technical specification of main axial fan-mine |
![]() |
|
![]() |
GB/T 40859-2021 流式数据监测控制图(中英文版) Control chart for streaming data monitoring |
![]() |
|
![]() |
GB 25548-2010 食品安全国家标准 食品添加剂 丙酸钙(中英文版) National Food Safety Standard-Food Additives-Calcium propionate |
![]() |
|
![]() |
GB/T 18700.6-2005 远动设备和系统 第6-2部分:与ISO标准和ITU-T建议 兼容的远动协议 OSI 1至4层基本标准的使用(中英文版) Telecontrol equipment and systems-Part 6-2:Telecontrol protocols compatible with ISO standards and ITU-T recommendations-Use of basic standards(OSI layers 1-4) |
![]() |
|
![]() |
GB/T 31932-2015 厚钢板电磁超声自动检测方法(中英文版) Method for electromagnetic automatic ultrasonic testing for thicker steel plates |
![]() |
|
![]() |
GB/T 39328-2020 增材制造 塑料材料挤出成形工艺规范(中英文版) Additive manufacturing—Specification for material extrusion process of plastic materials |
![]() |
|
![]() |
GB/T 19234-2003 乘用车尺寸代码(中英文版) Dimensional codes for passenger cars |
![]() |
|
![]() |
GB/T 4340.2-2012 金属材料 维氏硬度试验 第2部分:硬度计的检验与校准(中英文版) Metallic materials - Vickers hardness test - Part 2:Verification and calibration of testing machines |
![]() |
|
![]() |
GB/T 37303.1-2019 船舶和海上技术 船舶操纵性 第1部分:基本概念、量与试验条件(中英文版) Ships and marine technology—Manoeuvring of ships—Part 1:General concepts, quantities and test conditions |
![]() |
|
![]() |
GB/T 24450-2009 社会经济目标分类与代码(中英文版) Classification and codes of socio-economic objectives |
![]() |
|
![]() |
GB/T 43794-2024 用户供电可靠性评价指标导则(中英文版) Evaporative cooling fans |
![]() |
|
![]() |
GB/T 35961-2018 二氧化钛型硫磺回收催化剂物理性能试验方法(中英文版) Test method of physical properties for titanium oxide type sulfur recovery catalysts |
![]() |
|
![]() |
GB/Z 21724-2008 出口蔬菜质量安全控制规范(中英文版) Code on quality and safety control of vegetable for export |
![]() |
|
![]() |
GB/T 2283-2019 焦化苯《第1号修改单》(中英文版) Coking benzene "Amendment No. 1" |
![]() |
|
![]() |
GB/T 27653-2011 防腐木材中季铵盐的分析方法 两相滴定法(中英文版) Methods for analysis of quaternary ammonium compounds in preservative-treated wood - 2-Phase titration |
![]() |
|
![]() |
GB/T 17554.3-2006 识别卡 测试方法 第3部分:带触点的集成电路卡及其相关接口设备(中英文版) Identification cards - Test methods Part 3: Integrated circuit(s) cards with contacts and related interface devices |
![]() |
|
![]() |
GB/T 33896-2017 分离膜外壳循环压力试验方法(中英文版) Test method for cyclic pressure of membrane housing |
![]() |
|
![]() |
GB/T 50531-2009 建设工程计价设备材料划分标准(中英文版) Standard of valuated building services and components’classification |
![]() |
|
![]() |
GB 42302-2022 呼吸防护 自吸过滤式逃生呼吸器(中英文版) Respiratory Protection Self-priming filter escape respirator |
![]() |
|
![]() |
GB/T 1819.9-2004 锡精矿化学分析方法 三氧化钨量的测定 硫氰酸盐分光光度法(中英文版) Methods for chemical analysis of tin concentrates--Determination of tungsten trioxide content--The thiocyanate spectrophotometric method |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [579] [580] [581] [582] [583] [584] [585] |