网站首頁   GB 中國國家標準檢索   GB標準關鍵詞   GB標準檢測及合規性分析 價格和支付方式 聯系我們
 

中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
GB/T 28613-2012
机械产品绿色制造工艺规划 导则(中英文版)
Guideline for green manufacturing process planning of mechanical products
GB/T 37419-2019
小艇 操舵、换挡和油门的电气或电子控制系统(中英文版)
Small craft—Electrical/electronic control systems for steering, shift and throttle
GB/T 18262-2024
人造板机械-通用技术条件(中英文版)
Artificial board machinery-General technical conditions
GB/T 23741-2009
饲料中4种巴比妥类药物的测定(中英文版)
Determination of four kinds of barbiturates in feeds
GB/T 4678.10-2003
压铸模零件 第10部分:推板导套(中英文版)
Die-casting die components--Part 10: Ejector guide bush
GB/T 20042.7-2014
质子交换膜燃料电池 第7部分:炭纸特性测试方法(中英文版)
Proton exchange membrane fuel cells―Part 7: Test method of carbon paper properties
GB/T 36591-2018
硬质合金制品的涂层金相检测方法(中英文版)
Metallographic detection method for coatings on carbide products
GB 3102.4-1993
热学的量和单位(中英文版)
Quantities and units of heat
GB/T 42821-2023
贝类包纳米虫病诊断方法(中英文版)
Diagnostic Methods for Nanoplasia in Shellfish Bags
GB/T 21871-2008
橡胶配合剂 缩略语(中英文版)
Rubber compounding ingredients - Abbreviations
GB/T 26609-2011
工业用乙酸异丁酯(中英文版)
Isobutyl acetate for industrial use
GB/T 34050-2017
智能温度仪表 通用技术条件(中英文版)
Intelligent temperature measuring instruments—General technical requirements
GB/T 39693.7-2022
硫化橡胶或热塑性橡胶 硬度的测定 第7部分:邵氏硬度法测定胶辊的表观硬度(中英文版)
Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 7: Determination of the apparent hardness of rubber rollers by the Shore hardness method
GB/T 20402-2006
超市鲜、冻畜禽产品准入技术要求(中英文版)
The technical requirement of fresh & frozen livestock products for supermarket
GB/T 22585-2008
透明窗口信封(中英文版)
Envelope with transparent window
GB 29955-2013
食品安全国家标准 食品添加剂 δ-十一内酯(中英文版)
National Food Safety Standard Food Additive Identification Allyl disulfide Food Additive Identification δ-undecanolactone
GB/T 1222-2016
弹簧钢(中英文版)
Spring steels
GB/T 20696-2021
高效氯氟氰菊酯乳油(中英文版)
Lambda-cyhalothrin emulsifiable concentrate
GB/T 25175-2010
大件垃圾收集和利用技术要求(中英文版)
Technical requirements for collection and recycling of bulky waste
GB/T 6609.8-2004
氧化铝化学分析方法和物理性能测定方法 二苯基碳酰二肼光度法测定三氧化二铬含量(中英文版)
Chemical analysis methods and determination of physical performance of alumina--Determination of chromium sesquioxide content--Diphenyl carbazide photometric method
GB/T 70.4-2015
内六角平圆头凸缘螺钉(中英文版)
Hexagon socket button head screws with collar
GB/T 38693-2020
燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 热电式熄火保护装置(中英文版)
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Thermoelectric flame supervision controls
GB/T 6409.1-1994
超硬磨具和锯 形状总览、标记(中英文版)
Superhard abrasive products and saws--General survey designation
GB/T 6288-1986
粒状分子筛粒度测定方法(中英文版)
Determination of particle size for granular molecular sieve
GB/T 9330.2-2008
塑料绝缘控制电缆 第2部分:聚氯乙烯绝缘和护套控制电缆(中英文版)
Plastic insulated control cables - Part 2:Polyvinyl chloride insulated and sheathed control cables
GB/Z 28820.1-2012
聚合物长期辐射老化 第1部分:监测扩散限制氧化的技术(中英文版)
Long-term radiation ageing in polymers - Part 1: Techniques for monitoring diffusion-limited oxidation
GB/T 19903.14-2019
自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第14部分:电火花成形加工用工艺数据(中英文版)
Automation systems and integration—Physical device control—Data model for computerized numerical controllers—Part 14: Process data for sink electrical discharge machining (sink-EDM)
GB/T 24820-2024
实验室家具通用技术条件(中英文版)
General technical conditions for laboratory furniture
GB/T 18033-2007
无缝铜水管和铜气管(中英文版)
Seamless copper tubes for water and gas
GB/T 23928-2009
低速货车 前轴连接尺寸(中英文版)
Low-speed goods vehicles - Front axle mounting dimensions
GB/T 19981.2-2014
纺织品 织物和服装的专业维护、干洗和湿洗 第2部分:使用四氯乙烯干洗和整烫时性能试验的程序(中英文版)
Textiles―Professional care,drycleaning and wetcleaning of fabrics and garments―Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene
GB/T 34960.5-2018
信息技术服务 治理 第5部分:数据治理规范(中英文版)
Information technology service-Governance-Part 5: Specification of data governance
GB/T 43107-2023
核电站仪表引压用不锈钢无缝钢管(中英文版)
Stainless steel seamless steel pipe for instrument pressure induction in nuclear power plants
GB/T 13236-2011
石油和液体石油产品 储罐液位手工测量设备(中英文版)
Petroleum and liquid petroleum products - Equipment for measurement of liquid levels in storage tanks - Manual method
GB/T 3849-1983
硬质合金洛氏硬度 (A标尺) 试验方法(中英文版)
Hardmetals--Rockwell hardness (scaleA) test method
GB/T 34628-2017
焊缝无损检测 金属材料应用通则(中英文版)
Non-destructive testing of welds—General rules for metallic materials
GB/T 3222.2-2022
声学 环境噪声的描述、测量与评价 第2部分:声压级测定(中英文版)
Acoustics—Description, measurement and assessment of environmental noise—Part 2: Determination of sound pressure levels
GB/T 1880-1995
磷矿石和磷精矿中三氧化硫含量的测定 重量法(中英文版)
Phosphate rock and concentrate--Determination of sulfur trioxide content--Gravimetric method
GB/T 22804-2008
纸浆、纸和纸板 汞含量的测定(中英文版)
Pulp, paper and board - Determination of mercury content
GB 4793.9-2013
测量、控制和实验室用电气设备的安全要求 第9部分:实验室用分析和其他目的自动和半自动设备的特殊要求(中英文版)
Safety requirements for electrical equipment for measurement, control and laboratory use―Part 9: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
GB/T 3903.2-2017
鞋类 整鞋试验方法 耐磨性能(中英文版)
Footwear—Test methods for whole shoe—Abrasion resistance
GB/T 40071-2021
纳米技术 石墨烯相关二维材料的层数测量 光学对比度法(中英文版)
Nanotechnologies—Measurement of the number of layers of graphene-related two-dimensional (2D) materials—Optical contrast method
GB/T 17714-1999
啤酒桶(中英文版)
Keg
GB/T 21486-2008
液压滤芯 检验性能特性的试验程序(中英文版)
Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics
GB/T 5869-2010
救生衣灯(中英文版)
Lifejacket lights
GB/T 32561.3-2016
红外光学硫系玻璃测试方法 第3部分:杂质(中英文版)
Measuring method for chalcogenide infrared optical glass—Part 3: Impurity
GB 15892-2020
生活饮用水用聚氯化铝(中英文版)
Polyaluminium chloride for treatment of drinking water
GB/T 19892.1-2005
批控制 第1部分:模型和术语(中英文版)
Batch control Part 1:Models and terminology
GB/T 7477-1987
水质 钙和镁总量的测定 EDTA滴定法(中英文版)
Water quality--Determination of thesum of calcium and magnesium--EDTA titrimetric method
GB/T 3246.1-2012
变形铝及铝合金制品组织检验方法 第1部分:显微组织检验方法(中英文版)
Inspection method for structure of wrought aluminum and aluminum alloy products Part 1 : Inspection method for microstructure

找到:57335條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: [594] [595] [596] [597] [598] [599] [600]

 

1F Zhongmao Building, No.1 Beizhan Road, Luohu District, Shenzhen City, China
+86-755-2583-1330       [email protected]
©  Copyright  2001-2025 All Rights Reserved