中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 18213-2000 低频电缆和电线无镀层和有镀层铜导体电阻计算导则(中英文版) Guide to the calculation of resistance of plain and coated copper conductor of low-frequency cables and wires |
![]() |
|
![]() |
GB 20997-2007 轻型商用车辆燃料消耗量限值(中英文版) Limits of fuel consumption for light duty commercial vehicles |
![]() |
|
![]() |
GB/T 29529-2013 泵的噪声测量与评价方法(中英文版) Methods of measuring and evaluating noise of pumps |
![]() |
|
![]() |
GB/T 32206-2015 气相色谱用电导检测器测试方法(中英文版) Standard practice for testing electrolytic conductivity detectors used in gas chromatography |
![]() |
|
![]() |
GB/T 38579-2020 生物产品中光合细菌测定(中英文版) Determination of photosynthetic bacteria in biologic products |
![]() |
|
![]() |
GB/T 24815-2009 起重用短环链 吊链等用6级普通精度链(中英文版) Short link chain for lifting purposes - Grade 6,non-calibrated,for chain slings etc. |
![]() |
|
![]() |
GB/T 37621-2019 直埋式蝶阀(中英文版) Buried type butterfly valve |
![]() |
|
![]() |
GB/T 19633.1-2024 最终灭菌医疗器械包装-第1部分:材料、无菌屏障系统和包装系统的要求(中英文版) Terminally sterilized medical device packaging - Part 1: Requirements for materials, sterile barrier systems and packaging systems |
![]() |
|
![]() |
GB 50747-2012 石油化工污水处理设计规范(中英文版) Code for design of wastewater treatment in petrochemical industry |
![]() |
|
![]() |
GB/T 26949.16-2018 工业车辆 稳定性验证 第16部分: 步行式车辆(中英文版) Industrial trucks—Verification of stability—Part 16: Pedestrian-propelled trucks |
![]() |
|
![]() |
GB/T 34480-2023 高强高韧型Al-Zn-Mg-Cu系铝合金锻件(中英文版) High strength and high toughness Al-Zn-Mg-Cu series aluminum alloy forgings |
![]() |
|
![]() |
GB/T 18645-2002 动物结核病诊断技术(中英文版) Diagnostic techniques for tuberculosis of animal |
![]() |
|
![]() |
GB/T 21575-2008 危险品 极不敏感引爆物质的雷管试验方法(中英文版) Dangerous goods - Test method of cap for extremely insensitive detonate substance(EIDS) |
![]() |
|
![]() |
GB/T 22838.6-2009 卷烟和滤棒物理性能的测定 第6部分:硬度(中英文版) Determination of physical characteristics for cigarettes and filter rods - Part 6: Hardness |
![]() |
|
![]() |
GB 30978-2014 饮水机能效限定值及能效等级(中英文版) Minimum allowable values of the energy efficiency and energy efficiency grades for water dispensers |
![]() |
|
![]() |
GB/T 34645-2017 金属管材收缩应变比试验方法(中英文版) Contractile strain ratio testing of metal materials tubing |
![]() |
|
![]() |
GB/T 41301-2022 智能制造环境下的IPv6地址管理要求(中英文版) IPv6 address management requirements in intelligent manufacturing environment |
![]() |
|
![]() |
GB/T 19994-2005 自行车通用技术条件(中英文版) General Technical Requirements for road bicycles |
![]() |
|
![]() |
GB/T 4964-2010 内河航道及港口内船舶辐射噪声的测量(中英文版) Measurement of noise emitted by vessels on inland waterways and harbours |
![]() |
|
![]() |
GB/T 35298-2017 信息技术 学习、教育和培训 教育管理基础信息(中英文版) Information technology—Learning,education and training—Educational management general information |
![]() |
|
![]() |
GB/T 25195.4-2021 起重机 图形符号 第4部分:臂架起重机(中英文版) Cranes—Graphical symbols—Part 4:Jib cranes |
![]() |
|
![]() |
GB/T 22425-2008 通信用锂离子电池的回收处理要求(中英文版) The recycling and treatment requirements of lithium-ion battery for telecomunication |
![]() |
|
![]() |
GB 29683-2013 食品安全国家标准 动物性食品中对乙酰氨基酚残留量的测定 高效液相色谱法(中英文版) National Food Safety Standard-Determination of acetaminophen residues in animal foods - High performance liquid chromatography |
![]() |
|
![]() |
GB/T 32543-2016 建筑施工机械与设备 混凝土输送管 连接型式和安全要求(中英文版) Building construction machinery and equipment—Concrete delivery pipes—Connection types and safety requirements |
![]() |
|
![]() |
GB/T 39052-2020 公共资源拍卖中心运行服务规范(中英文版) Specifications for operation and service of public resources auction center |
![]() |
|
![]() |
GB/T 18998.2-2003 工业用氯化聚氯乙烯(PVC-C)管道系统 第2部分: 管材(中英文版) Chlorinated poly(vinyl chloride)(PVC-C) piping systems for industrial applications--Part 2: Pipes |
![]() |
|
![]() |
GB/T 5121.8-2008 铜及铜合金化学分析方法 第8部分:氧含量的测定(中英文版) Methods for chemical analysis of copper and copper alloys Part 8:Determination of oxygen content |
![]() |
|
![]() |
GB/T 24974-2010 收费用手动栏杆(中英文版) Toll manual barrier |
![]() |
|
![]() |
GB/T 17492-2019 工业用金属丝编织网 技术要求和检验(中英文版) Industrial woven wire cloth-Technical requirements and tests |
![]() |
|
![]() |
GB/T 20567-2006 钒氮合金(中英文版) Vanadium-nitrogen |
![]() |
|
![]() |
GB/T 21642.3-2012 基于IP网络的视讯会议系统设备技术要求 第3部分:多点控制单元(MCU)(中英文版) Technical requirements for IP video conference system devices - Part 3: multipoint control unit |
![]() |
|
![]() |
GB/T 14016-2018 船用声光报警信号器 通用技术条件(中英文版) Marine acoustic and optical alarm signaller—General specification |
![]() |
|
![]() |
GB/T 25774.1-2023 焊接材料的检验 第1部分: 钢、镍及镍合金熔敷金属力学性能试样的制备(中英文版) Examination of welding materials Part 1: Preparation of mechanical properties specimens of steel, nickel and nickel alloy deposited metals |
![]() |
|
![]() |
GB/T 4490-2009 织物芯输送带 宽度和长度(中英文版) Conveyor belts with textile carcass - Widths and lengths |
![]() |
|
![]() |
GB/T 812-1988 圆螺母(中英文版) Round nuts |
![]() |
|
![]() |
GB/T 31235-2014 ±800kV直流输电线路金具技术规范(中英文版) Technical specification for fittings of ±800 kV DC overhead transmission line |
![]() |
|
![]() |
GB/T 34868-2017 废旧复印机、打印机和速印机再制造通用规范(中英文版) General specification for remanufacturing of waste copiers ,printers and duplicators |
![]() |
|
![]() |
GB/T 20564.6-2022 汽车用高强度冷连轧钢板及钢带 第6部分:相变诱导塑性钢(中英文版) High-strength cold-rolled steel sheets and strips for automobiles—Part 6: Transformation-induced plasticity steels |
![]() |
|
![]() |
GB 19335-2003 一次性使用血路产品 通用技术条件(中英文版) Blood flow products for single use--General specification |
![]() |
|
![]() |
GB/T 22275.3-2008 良好实验室规范实施要求 第3部分:实验室供应商对良好实验室规范原则的符合情况(中英文版) Requirements of conduct for good laboratory practice - Part 3: Compliance of laboratory suppliers with GLP principles |
![]() |
|
![]() |
GB 50671-2011 飞机喷漆机库设计规范(中英文版) Code for design of aircraft paint hangar |
![]() |
|
![]() |
GB/T 35543-2017 核糖核酸酶A(中英文版) Ribonuclease A |
![]() |
|
![]() |
GB/T 40305-2021 现场设备集成 EDD与OPC UA集成技术规范(中英文版) Field device integration—EDD and OPC UA integration technology specification |
![]() |
|
![]() |
GB/T 4699.3-2007 铬铁、硅铬合金和氮化铬铁 磷含量的测定 铋磷钼蓝分光光度法和钼蓝分光光度法(中英文版) Ferrochromium, silicochromium and nitrogen-bearing ferrochromium -Determination of phosphorus content - Molybdobismuthylphosphoric blue spectrophotometric method and the molybdenum blue spectrophotometric method |
![]() |
|
![]() |
GB/T 6135.1-2008 直柄麻花钻 第1部分:粗直柄小麻花钻的型式和尺寸(中英文版) Parallel shank twist drills - Part 1: The types and dimensions for small type twist drills with oversize parallel shank |
![]() |
|
![]() |
GB/T 17657-2013 人造板及饰面人造板理化性能试验方法(中英文版) Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels |
![]() |
|
![]() |
GB/T 32867-2016 中国标准关联标识符(ISLI)(中英文版) China standard link identifier(ISLI) |
![]() |
|
![]() |
GB/T 15030-2021 剑麻钢丝绳芯(中英文版) Sisal main cores in steel wire ropes |
![]() |
|
![]() |
GB 4869-1985 职业性局部振动病诊断标准及处理原则(中英文版) Diagnostic criteria and principles of management of occupational vibration disease |
![]() |
|
![]() |
GB/T 14577-1993 织物拒水性测定 邦迪斯门淋雨法(中英文版) Textiles--Determination of water repellency of fabrics by the Bundesmann rain-shower test |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [622] [623] [624] [625] [626] [627] [628] |