中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB 34456-2017 饲料添加剂 磷酸二氢钠(中英文版) Feed additive―Sodium dihydrogen phosphate |
![]() |
|
![]() |
GB/Z 41476.2-2022 无损检测仪器 1MV以下X射线设备的辐射防护规则 第2部分:防护技术要求(中英文版) Non destructive testing instruments - radiation protection rules for X-ray equipment below 1mV - Part 2: technical requirements for protection |
![]() |
|
![]() |
GB/T 23296.12-2009 食品接触材料 高分子材料 食品模拟物中11-氨基十一酸的测定 高效液相色谱法(中英文版) Food contact materials - Polymer - Determination of 11-aminoundecanoic acid in food simulants - High performance liquid chromatography |
![]() |
|
![]() |
GB/T 30958-2014 生猪屠宰成套设备技术条件(中英文版) Technology for set of pig buchering equipments |
![]() |
|
![]() |
GB/T 15071-2008 金属镝(中英文版) Dysprosium metal |
![]() |
|
![]() |
GB/T 16405-1996 声学 管道消声器无气流状态下插入损失测量 实验室简易法(中英文版) Acoustics--Measurement of insertion loss of ducted silencers without flow--Laboratory survey method |
![]() |
|
![]() |
GB/T 35294-2017 信息技术 科学数据引用(中英文版) Information technology—Scientific data citation |
![]() |
|
![]() |
GB/T 6609.11-2004 氧化铝化学分析方法和物理性能测定方法 火焰原子吸收光谱法测定一氧化锰含量(中英文版) Chemical analysis methods and determination of physical performance of alumina--Determination of manganous oxide content--Flame atomic absorption spectrophotometric method |
![]() |
|
![]() |
GB 14391-2021 卫星紧急无线电示位标性能要求(中英文版) Performance requirements for satellite emergency position indicating radio beacons |
![]() |
|
![]() |
GB 26255.1-2010 燃气用聚乙烯管道系统的机械管件 第1部分:公称外径不大于63mm的管材用钢塑转换管件(中英文版) Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels - Part 1:Metal fittings for pipes of nominal outside diameter less than or equal to 63mm |
![]() |
|
![]() |
GB/T 19955.1-2005 蒸汽流真空泵性能测量方法 第1部分:体积流率(抽速)的测量(中英文版) Vapour vacuum pumps-Measurement of performance characteristics Part1:Measurement of volume rate of flow(pumping speed) |
![]() |
|
![]() |
GB/Z 22202-2016 家用和类似用途的剩余电流动作断路器可靠性试验方法(中英文版) Reliability test method of residual current operated circuit-breakers for household and similar uses |
![]() |
|
![]() |
GB 27790-2020 城镇燃气调压器(中英文版) City gas pressure regulator |
![]() |
|
![]() |
GB/T 29557-2013 表面化学分析 深度剖析 溅射深度测量(中英文版) Surface chemical analysis - Depth profiling - Measurment of sputtered depth |
![]() |
|
![]() |
GB/T 5838.41-2015 荧光粉 第4-1部分:黑白显示管用荧光粉(中英文版) Phosphors—Part 4-1: Phosphors for black-white picture tubes |
![]() |
|
![]() |
GB/T 38270-2019 建筑施工机械与设备 移动式拆除机械 安全要求(中英文版) Building construction machinery and equipment—Mobile demolition machinery—Safety requirements |
![]() |
|
![]() |
GB/T 24864-2010 鸡胴体分割(中英文版) Chicken carcass segmentation |
![]() |
|
![]() |
GB/T 11066.2-2008 金化学分析方法 银量的测定 火焰原子吸收光谱法(中英文版) Methods for chemical analysis of gold - Determination of silver content - Flame atomic absorption spectrometry |
![]() |
|
![]() |
GB 5906-1997 尘肺的X线诊断(中英文版) Roentgeno-diagnosis of pneumoconioses |
![]() |
|
![]() |
GB/T 50559-2018 平板玻璃工厂环境保护设施设计标准(中英文版) Flat glass factory environmental protection facility design standards |
![]() |
|
![]() |
GB 14925-2023 实验动物 环境及设施(中英文版) Laboratory animal environment and facilities |
![]() |
|
![]() |
GB/T 28271-2012 米制超细牙螺纹 公差(中英文版) Metric screw threads with extra fine pitch - Tolerances |
![]() |
|
![]() |
GB/T 15458-2006 煤的磨损指数测定方法(中英文版) Determination of abrasion index of coal |
![]() |
|
![]() |
GB/T 13747.6-1992 锆及锆合金化学分析方法 2,9-二甲基-1,10-二氮杂菲分光光度法测定铜量(中英文版) Zirconium and zirconium alloys--Determination of copper content--2,9-Dimethyl-1,10-phenanthroline spectrophotometric method |
![]() |
|
![]() |
GB/T 12734-2017 同步带传动 汽车同步带(中英文版) Synchronous belt drives—Automotive synchronous belts |
![]() |
|
![]() |
GB/T 42456-2023 工业自动化和控制系统信息安全 IACS组件的安全技术要求(中英文版) Industrial automation and control system information security - Security technical requirements for IACS components |
![]() |
|
![]() |
GB/T 17759-2009 本色布布面疵点检验方法(中英文版) Method of inspection for grey fabric surface defects |
![]() |
|
![]() |
GB/T 7568.8-2014 纺织品 色牢度试验 标准贴衬织物 第8部分:二醋酯纤维(中英文版) Textiles―Tests for colour fastness―Standard adjacent fabric―Part 8: Secondary acetate |
![]() |
|
![]() |
GB/T 16404.2-1999 声学 声强法测定噪声源的声功率级 第2部分:扫描测量(中英文版) Acoustics--Determination of sound power levels of noise sources using sound intensity--Part 2:Measurement by scanning |
![]() |
|
![]() |
GB/T 33604-2017 电力系统简单服务接口规范(中英文版) Simple service interface specification for power system |
![]() |
|
![]() |
GB/T 3517-2022 天然生胶 塑性保持率(PRI)的测定(中英文版) Natural raw rubber - Determination of plasticity retention (PRI) |
![]() |
|
![]() |
GB/T 26297.2-2010 铝用炭素材料取样方法 第2部分:侧部炭块(中英文版) Sampling of carbonaceous materials used for aluminium production - Part 2: Sidewall blocks |
![]() |
|
![]() |
GB 1886.226-2016 食品安全国家标准 食品添加剂 海藻酸丙二醇酯(中英文版) National Food Safety Standard - Food Additives - Propylene Glycol Alginate |
![]() |
|
![]() |
GB/T 14413-2008 船用舷窗(中英文版) Marine side scuttles |
![]() |
|
![]() |
GB/T 17208-1998 电子设备用固定电容器 第18部分:空白详细规范 非固体电解质片式铝固定电容器 评定水平E(中英文版) Fixed capacitors for use in electronic equipment--Part 18:Blank detail specification--Fixed aluminium electrolytic chip capacitors with non-solid electrolyte--Assessment level E |
![]() |
|
![]() |
GB/T 19361-2021 电火花线切割机床(单向走丝型) 精度检验(中英文版) Wire electrical discharge machines(unidirectional traveling type)—Testing of the accuracy |
![]() |
|
![]() |
GB/T 12529.2-2008 粮油工业用图形符号、代号 第2部分:碾米工业(中英文版) Graphic symbols and codes for grain and oils industry - Part 2: Rice milling |
![]() |
|
![]() |
GB/T 30001.2-2013 信息技术 基于射频的移动支付 第2部分:卡技术要求(中英文版) Information technology - Mobile payment based on radio frequency - Part 2: Card technical requirements |
![]() |
|
![]() |
GB/T 21082.5-2007 银行业务 密钥管理(零售) 第5部分: 公开密钥密码系统的密钥生命周期(中英文版) Banking - Key management (retail) - Part 5: Key life cycle for public key cryptosystems |
![]() |
|
![]() |
GB/T 18091-2015 玻璃幕墙光热性能(中英文版) Optical and thermal performance of glass curtain wall |
![]() |
|
![]() |
GB/T 39374-2020 皮革 物理和机械试验 弯折力的测定(中英文版) Leather—Physical and mechanical tests—Determination of bending force |
![]() |
|
![]() |
GB/T 25112-2010 焊接、切割及类似工艺用压力表(中英文版) Pressure gauge used in welding,cutting and allied processes |
![]() |
|
![]() |
GB 18196-2000 过量受照人员的医学检查规范(中英文版) Specifications of the medical examinations for the overexposed individuals |
![]() |
|
![]() |
GB/T 37350-2019 自升式钻井平台上层建筑结构设计指南(中英文版) Design guidelines for superstructure of self-elevating drilling units |
![]() |
|
![]() |
GB/T 43767.2-2024 船载岸电受电设备-第2部分:高压岸电箱(柜)(中英文版) Shipboard shore power receiving equipment - Part 2: High voltage shore power box (cabinet) |
![]() |
|
![]() |
GB/T 28575-2012 YE3系列(IP55)超高效率三相异步电动机技术条件(机座号80~355)(中英文版) Specification for YE3 Series(IP55)super-high efficiency three-phase induction motor(Frame size 80~355) |
![]() |
|
![]() |
GB/T 17772-2018 土方机械 保护结构的实验室鉴定 挠曲极限量的规定(中英文版) Earth-moving machinery—Laboratory evaluations of protective structures—Specifications for deflection-limiting volume |
![]() |
|
![]() |
GB/T 22188.4-2023 控制中心的人类工效学设计 第4部分:工作站的布局和尺寸(中英文版) Ergonomic Design of Control Centers Part 4: Workstation Layout and Dimensions |
![]() |
|
![]() |
GB/T 23753-2009 330kV及500kV油浸式并联电抗器技术参数和要求(中英文版) Specification and technical requirements for 330kV and 500kV oil- immersed shunt reactors |
![]() |
|
![]() |
GB/T 15022.6-2014 电气绝缘用树脂基活性复合物 第6部分:核电站1E级配电变压器绝缘用环氧浇注树脂(中英文版) Resin based reactive compounds used for electrical insulation―Part 6:Epoxy casting resinous compounds use for class 1E distribution transformer in nuclear power generating stations |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [697] [698] [699] [700] [701] [702] [703] |