中華人民共和國國家標準(中國大陸GB標準)英文版 |
![]() |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
![]() |
GB/T 23909.3-2009 无损检测 射线透视检测 第3部分:金属材料X和伽玛射线透视检测总则(中英文版) Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays |
![]() |
|
![]() |
GB/T 17004-1997 防伪技术术语(中英文版) Anti-counterfeiting technological terminology |
![]() |
|
![]() |
GB 31060-2014 水处理剂 硫酸铝(中英文版) Water treatment chemicals―Aluminum sulfate |
![]() |
|
![]() |
GB 1886.279-2016 食品安全国家标准 食品添加剂 洋茉莉醛(又名胡椒醛)(中英文版) National Food Safety Standard - Food Additives - Jasmine aldehyde (also known as piperonal) |
![]() |
|
![]() |
GB/T 22712-2021 变频电机用G系列冷却风机技术规范(中英文版) Technical specification for G series cooling fans applying to variable frequency motors |
![]() |
|
![]() |
GB/T 26665-2011 制动器 术语(中英文版) Brake vocabulary |
![]() |
|
![]() |
GB/T 14370-2015 预应力筋用锚具、夹具和连接器(中英文版) Anchorage,grip and coupler for prestressing tendons |
![]() |
|
![]() |
GB/T 39370-2020 皮革 物理和机械试验 表面反射性能的测定(中英文版) Leather—Physical and mechanical tests—Determination of surface reflectance |
![]() |
|
![]() |
GB/T 22661.5-2008 氟硼酸钾化学分析方法 第5部分:钙含量的测定 火焰原子吸收光谱法(中英文版) Chemical analysis methods of potassium fluoborade - Part 5: Determiantion of calcium content - Flame atomic absorption spectrometric method |
![]() |
|
![]() |
GB/T 731-2008 黄麻布和麻袋(中英文版) Gunny cloth and bags |
![]() |
|
![]() |
GB/T 19864.1-2013 体视显微镜 第1部分:普及型体视显微镜(中英文版) Steromicroscopes―Part 1: Stereomicroscopes for general use |
![]() |
|
![]() |
GB 50299-1999 地下铁道工程施工及验收规范(中英文版) Code for construction and acceptance of metro engineering |
![]() |
|
![]() |
GB/T 37346-2019 不动产单元设定与代码编制规则(中英文版) Regulation on real property unit formation and identifier coding |
![]() |
|
![]() |
GB/T 43661-2024 表面化学分析-扫描探针显微术-用于二维掺杂物成像等用途的电扫描探针显微镜(ESPM,如SSRM和SCM)空间分辨的定义和校准(中英文版) Surface chemical analysis - Scanning probe microscopy - Definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPM, such as SSRM and SCM) for two-dimensional imaging of dopants, etc. |
![]() |
|
![]() |
GB/T 21198.1-2007 贵金属合金首饰中贵金属含量的测定 ICP光谱法 第1部分:铂合金首饰 铂含量的测定 采用钇为内标(中英文版) Determination of precious metals in precious metals jewellery alloys -Method using ICP spectrometry - Part 1:Platinum jewellery alloys - Determination of platinum - Method using a solution with yttrium as internal standard element |
![]() |
|
![]() |
GB/T 14895-2010 金属切削刀具术语 切齿刀具(中英文版) Terms in metal cutting tools - Gear cutters |
![]() |
|
![]() |
GB/T 36694-2018 土方机械 履带式推土机燃油消耗量 试验方法(中英文版) Earth-moving machinery—Fuel consumption for tractor-dozer—Test methods |
![]() |
|
![]() |
GB/T 5336-2005 大客车车身修理技术条件(中英文版) Repair specification for large passenger vehicle body |
![]() |
|
![]() |
GB/T 23981.2-2023 色漆和清漆 遮盖力的测定 第2部分:黑白格板法(中英文版) Paints and varnishes - Determination of hiding power - Part 2: Black and white grid method |
![]() |
|
![]() |
GB/T 15547-2012 锻钢冷轧辊辊坯(中英文版) Blanks of forged steel rolls for cold rolling mill |
![]() |
|
![]() |
GB/T 23612-2017 铝合金建筑型材阳极氧化与阳极氧化电泳涂漆工艺技术规范(中英文版) Technical specification for process of anodizing and electrodeposition painting on aluminium alloy extruded profiles for architecture |
![]() |
|
![]() |
GB/T 42186-2022 医学检验生物样本冷链物流运作规范(中英文版) Operational Specifications for Cold Chain Logistics of Biological Samples for Medical Testing |
![]() |
|
![]() |
GB/T 24275-2009 低压固定封闭式成套开关设备和控制设备(中英文版) Low-voltage fixed connection enclosed switchgear and controlgear assemblies |
![]() |
|
![]() |
GB/T 31445-2015 雾天高速公路交通安全控制条件(中英文版) Standard for expressway traffic safety control under fog weather conditions |
![]() |
|
![]() |
GB/T 1687.1-2016 硫化橡胶 在屈挠试验中温升和耐疲劳性能的测定 第1部分:基本原理(中英文版) Rubber, vulcanized—Determination of temperature rise and resistance to fatigue in flexometer testing—Part 1: Basic principles |
![]() |
|
![]() |
GB/T 6588-2000 半导体器件 分立器件 第3部分:信号(包括开关)和调整二极管 第1篇 信号二极管、开关二极管和可控雪崩二极管空白详细规范(中英文版) Semiconductor devices--Discrete devices--Part 3:Signal(including switching) and regulator diodes--Section One--Blank detail specification for signal diodes,switching diodes and controlled-avalanche diodes |
![]() |
|
![]() |
GB/T 41249-2021 产业帮扶 “猪-沼-果(粮、菜)” 循环农业项目运营管理指南(中英文版) Industrial assistance—Guidance for operation management of “pig-biogas-fruit (grain and vegetable)”circular agricultural project |
![]() |
|
![]() |
GB/T 5631-2008 扩口式可调向端弯通管接头(中英文版) Flared couplings - Straight thread elbow |
![]() |
|
![]() |
GB/T 26897-2011 粮油机械 铁辊碾米机(中英文版) Grain and oil machinery - Iron roll rice whitener |
![]() |
|
![]() |
GB/T 32255-2015 高温承压马氏体不锈钢和合金钢通用铸件(中英文版) General martensitic stainless steel and alloy steel castings suitable for high temperature and high pressure service |
![]() |
|
![]() |
GB/T 3098.23-2020 紧固件机械性能 M42~M72螺栓、螺钉和螺柱(中英文版) Mechanical properties of fasteners—M42~M72 bolts, screws and studs |
![]() |
|
![]() |
GB 20181-2006 矿井提升机和矿用提升绞车 安全要求(中英文版) Mine hoists and mine winders Safety requirements |
![]() |
|
![]() |
GB/T 3903.43-2008 鞋类 帮面、衬里和内垫试验方法 缝合强度(中英文版) Footwear - Test methods for uppers, lining and insocks - Seam strength |
![]() |
|
![]() |
GB/T 16508.1-2013 锅壳锅炉 第1部分:总则(中英文版) Shell boilers―Part 1:General requiments |
![]() |
|
![]() |
GB/T 51362-2019 制造工业工程设计信息模型应用标准(中英文版) Application standard for manufacturing industry design information model |
![]() |
|
![]() |
GB/T 44034-2024 铁矿石-矿浆的取样方法(中英文版) Iron ore - Sampling method of ore pulp |
![]() |
|
![]() |
GB/Z 25598-2010 地理信息 目录服务规范(中英文版) Geographic information - Catalogue service specification |
![]() |
|
![]() |
GB/T 36550-2018 抽水蓄能电站基本名词术语(中英文版) Basic terminology of pumped storage power station |
![]() |
|
![]() |
GB/T 2900.54-2002 电工术语 无线电通信:发射机、接收机、网络和运行(中英文版) Electrotechnical terminology--Radiocommunications:transmitters,receivers,networks and operations |
![]() |
|
![]() |
GB/T 955-1987 波形弹性垫圈(中英文版) Wave spring washers |
![]() |
|
![]() |
GB/T 42466-2023 生物样本库多能干细胞管理技术规范(中英文版) Technical specifications for the management of pluripotent stem cells in biobanks |
![]() |
|
![]() |
GB/T 324-2008 焊缝符号表示法(中英文版) Weld symbolic representation on drawings |
![]() |
|
![]() |
GB/T 231.3-2012 金属材料 布氏硬度试验 第3部分:标准硬度块的标定(中英文版) Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks |
![]() |
|
![]() |
GB/T 6883-2017 线、棒、管拉模用硬质合金烧结品 尺寸(中英文版) Cemented carbide sintering body for wire, bar or tube drawing dies—Dimensions |
![]() |
|
![]() |
GB/T 41344.4-2022 机械安全 风险预警 第4部分:措施(中英文版) Machinery Safety Risk Warning Part 4: Measures |
![]() |
|
![]() |
GB/T 20822-2007 固液法白酒(中英文版) Chinese spirits made from tradition and liquid fermentation |
![]() |
|
![]() |
GB/T 24339.1-2009 轨道交通 通信、信号和处理系统 第1部分:封闭式传输系统中的安全相关通信(中英文版) Railway applications - Communication,signalling and processing systems - Part 1: Safety-related communication in closed transmission systems |
![]() |
|
![]() |
GB/T 5170.10-2017 环境试验设备检验方法 第10部分:高低温低气压试验设备(中英文版) Inspection methods for environmental testing equipments—Part 10:Combined high and low temperature/low air pressure testing equipments |
![]() |
|
![]() |
GB/T 1551-2021 硅单晶电阻率的测定 直排四探针法和直流两探针法(中英文版) Test method for measuring resistivity of monocrystal silicon—In-line four-point probe and direct current two-point probe method |
![]() |
|
![]() |
GB/T 17747.1-2011 天然气压缩因子的计算 第1部分:导论和指南(中英文版) Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines |
![]() |
找到:57335條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [724] [725] [726] [727] [728] [729] [730] |